Get Vehicle toolkit Guide for Volkswagen California Van Fourth Generation (2024-2025)

Stowage

The vehicle toolkit and the removable ball coupling may be located in different places depending on the vehicle

model.

Multivan

In the stowage compartment on the rear of the bench seat/bed

1. Open the stowage compartment.

In the luggage compartment over the rear left wheel housing, possibly under a cover→ Stowage.

1. Loosen securing strap.

2. To remove, undo the jack screw if necessary.

Kombi, panel van, Caravelle

In the luggage compartment over the rear left wheel housing, possibly under a cover→ Stowage.

1. Loosen the securing strap if necessary.

2. If necessary, undo the bolt to remove the vehicle jack.

Dropside with single cab

Behind the driver seat.

1. Loosen securing strap.

Dropside with double cab, panel van Plus

On the left-hand side under the rear bench seat.

1. Loosen securing strap.

Vehicles with a 3-seat bench in the fourth row of

seats

To access the vehicle tool kit, the 3-seat bench must be supported with the support rod (→ Rear

seats).

After using the jack, crank it back to its original position so that it can be stowed

safely.

500

Contents of the vehicle toolkit

The scope of the on-board tool kit depends on the country and equipment. The following section describes the

maximum scope:

Fig. 1 Contents of the toolbox (illustration).

Screwdriver with hexagon socket in the handle for unscrewing or screwing tight slackened wheel bolts. The

screwdriver blade is reversible. The screwdriver is located in the box spanner.

Adapter for the anti-theft wheel bolt. Carry the wheel bolt adapter in the vehicle toolkit at all times. The code

number of the anti-theft wheel bolt is stamped on the front of the adapter. You will need this number to

replace the adapter if lost. Make a note of the code number for the anti-theft wheel bolt and keep it in a safe

place – but not inside the vehicle.

Screw-in towing eye.

Hook for pulling off the centre covers, wheel covers, the wheel bolt caps and the cover for the screw-in towing

eye at front.

Wheel wrench for loosening and tightening the wheel bolts.

Jack. Before repacking the jack, fully wind in the jack claw so that the jack can be stowed securely.

Ratchet for the jack.

Extension for positioning and screwing in the wheel bolts.

Tyre pressure gauge

In some countries, there may also be a tyre pressure gauge in the vehicle.

Servicing the jack

If a jack is included in the vehicle toolkit, it is not usually subject to any maintenance intervals.

1. Grease the jack with a universal lubricant when necessary.

501

Vehicle toolkit for Your Volkswagen California Van Fourth Generation (2024-2025)

Popular Owner Manuals

Latest Owner Manuals