Get Volkswagen Information System -> MFI menu (Multi-Function Indicator) Guide for Volkswagen Cc 4 Door First Generation (2008-2011)

Menu

Function

See

Vehicle

status

Current warning and information

messages.

This menu item is only displayed

when warning or information

messages are available. The

number of available messages is

shown in the display. Example:

1/1 or 2/2.

Settings

Includes the Convenience and

Lights & Vision submenus, as

well as many settings such as

time, speed warning for winter

tires, language, and units.

MFI menu (Multi-Function Indicator)

ꢀ Please first read and note the introductory information and

heed the WARNINGS

The MFI display has 2 automatic memories: 1 – single trip memory

and 2 – total trip memory. The number of the trip memory is shown

at the upper right of the display.

The trip memories are in addition to the trip odometer, which is dis-

played in the bottom part of the instrument cluster and controlled us-

ing the ꢀꢀꢁꢂꢃ button on the right of the instrument panel ⇒ꢀfig. 9 (4).

To display the distance driven on trips 1 and 2, select the Route item

in the MFI menu. Press the ꢄꢅ button ⇒ꢀfig. 13 to toggle between

Route 1 and Route 2 (trip 1 and trip 2). Push and hold the ꢄꢅ button

to manually reset a trip memory to zero.

The memory accumulates and stores infor-

mation about distance driven and fuel used from

the time the ignition was switched on until the

Single trip time it was switched off.

1

2

memory

If the ignition stays off for 2 hours or more,

stored information is automatically deleted. If the

trip is continued within 2 hours after the ignition

was switched off, the new values are added.

The memory displays and stores the accumulat-

ed driving and fuel consumption data of any

number of single trips up to a total driving time

of 99 hours and 59 minutes, and up to a total

distance of 9,999 miles (9,999 km). If one of the

maximum values is exceeded, then the memory

is automatically cleared and starts again from 0.

Total trip

memory

Possible MFI menu displays

The following displays can be accessed in the MFI menu if enabled

under Settings > MFI data. Displays that are not enabled will not

appear.

Display

Function

Travel time

Driving time in hours (h) and minutes (min) cor-

responding to trip memories 1 and 2 (toggle).

Consumption

--.- mpg

Current fuel consumption in miles per gallon

(l/100 km) while driving.

When units are set to miles, dashes appear in-

stead of a number when the engine is running

and the vehicle is standing still.

Consumption

--.- l/100 km

When units are set to kilometers, the display

shows liters consumed per hour when the en-

gine is running and the vehicle is standing still.

Av. consumption Average fuel consumption in miles per gallon

--.- mpg

(l/100 km) on trips per trip memories 1 and 2

Display

Function

(toggle) is displayed once the vehicle has been

driven about 330 feet (100 m). Until then, dash-

es appear instead of a number. The value dis-

played is updated every 5 seconds.

Av. consumption

--.- l/100 km

Range ꢀ -- mi

Range ꢀ -- km

Estimated distance in miles (km) that the vehicle

can go with the fuel left in the tank the way you

are currently driving. Takes account of the cur-

rent fuel consumption, among other things.

Route -- mi

Route -- km

Distance driven in miles (km) per trip memories

1 and 2 (toggle).

Average speed

-- mph

Average speed on trips per trip memories 1 and

2 (toggle). Displayed once the vehicle has been

driven about 300 feet (100 m). Until then, dash-

es may appear instead of a number. The value

displayed is updated every 5 seconds.

Average speed

-- km/h

-- mph

-- km/h

Digital display of the current vehicle speed.

Oil temperature Current engine oil temperature (digital display;

3.6 liter engine only).

Speed warning

--- mph

When the set speed (from 20–155 mph or 30–

250 km/h) is exceeded, an acoustic warning

sounds and a visual message may also appear

in the instrument cluster display.

Speed warning

--- km/h

Switching between the displays

Use the arrow up and down buttons (ꢁ and ꢂ) on the multi-

function steering wheel.

Storing speed for the speed warning

Navigate to MFI > Speed warning (Speed warning -- mph or

Speed warning -- km/h) display.

Press the ꢄꢅ button to save the current speed and to activate the

warning.

If the speed is not right, press buttons ꢁ or ꢂ on the multi-function

steering wheel to set a different speed within about 5 seconds. Then

press the ꢄꢅ button a second time or just wait a few seconds. The

speed is saved and the warning is activated.

To deactivate, toggle to --- mph or --- km/h and press the ꢄꢅ but-

ton. The set speed is deleted.

Manually erasing trip memory 1 or 2

Navigate to MFI > Route.

Select the memory to be erased.

Press the ꢄꢅ button for about 2 seconds.

Enabling and disabling displays

Use the Settings menu, submenu MFI data to enable displays you

want to be available under the MFI menu in the instrument cluster

display. The units in which data is displayed can also be changed ⇒ꢀ

Settings menu

ꢀ Please first read and note the introductory information and

heed the WARNINGS

Settings

menu

Function

Language

Set the language for messages in the display and

navigation system.

MFI data

Select the features you want to have displayed in the

MFI menu in the instrument cluster display

Convenience Convenience function settings

Volkswagen Information System -> MFI menu (Multi-Function Indicator) for Your Volkswagen Cc 4 Door First Generation (2008-2011)

Related Topics

Popular Owner Manuals

Latest Owner Manuals