Operating using the wiper lever
Fig. 1 On the right of the steering column: buttons on the wiper lever (illustration).
If any priority 1 warning messages are displayed, you will be unable to open any menus. Some
warnings can be confirmed and hidden using the → Fig. 1 1 button.
Selecting the menu or Infotainment system display
—Switch on the ignition.
—Personalisation: select user.
—If a message or the vehicle pictogram is displayed, press the → Fig. 1 1 button, several
times if required .
—To display the menus (→ Menus and information displays, Overview) or to return from a menu
or an information display to the menu selection, hold down the rocker switch → Fig. 1 2 .
—To browse through the menus, press the rocker switch up or down.
—To open the displayed menu or information display, press the → Fig. 1 1 button or wait until
the menu or information display opens automatically after a few seconds .
Changing settings in menus
—In the menu displayed, press the rocker switch → Fig. 1 2 upwards or downwards until the
desired menu option is marked. A frame appears around the selected option.
—Press the → Fig. 1 1 button to make the required changes . A “tick” indicates that the
particular system or function is active.
Returning to menu selection
In the menu, select the Back menu option to exit the menu.
If warnings about malfunctions are displayed when the ignition is switched on, it may
not be possible to adjust some settings as described, or the information display may
appear differently. If this is the case, take the vehicle to a qualified workshop to have the
malfunctions rectified.
English 
