—Correct the adjustment of the right-hand exterior mirror if necessary: turn the rotary knob to
position and adjust the right-hand exterior mirror.
Folding in the exterior mirrors while parking
The exterior mirrors fold in or out automatically when the vehicle is locked or unlocked from the
outside. In order for this to happen, the rotary knob must be in position , , or .
If the rotary knob for the electrically adjustable exterior mirrors is in the position , the exterior
mirrors remain folded in.
Storing and activating front passenger exterior mirror settings for
reversing
—Unlock the vehicle with the vehicle key to which the settings should be assigned.
—Apply the electronic parking brake.
—Switch on the ignition.
—Put the gearbox in neutral position.
—Select reverse gear.
—Adjust the front passenger exterior mirror so that you can see the kerb area, for example.
—Put the gearbox in neutral position.
—Switch off the ignition.
—The settings for the mirror position will be saved and assigned to the vehicle key.
Activating the front passenger exterior mirror setting for reversing:
—Turn the rotary knob for the exterior mirrors to position .
—Select reverse gear while the ignition is switched on. The right exterior mirror will now adjust
itself to the stored position.
The front passenger exterior mirror will move out of the position saved for reversing when the
vehicle is driven forwards faster than approximately 15 km/h (9 mph) or when the rotary knob is
moved out of position to another position.
WARNING
Injuries can be sustained if you do not take care when folding the exterior mirrors in and out.
●
Only fold the exterior mirrors in or out when there is no obstruction in the path of the
mirror.
●
Always ensure that no fingers are caught between the exterior mirror and the mirror base
when the exterior mirror is moved.
NOTICE
●
●
Always fold in exterior mirrors before using an automatic car wash.
Do not fold electrically folding exterior mirrors in or out manually as this can damage the
electric motor.
The exterior mirror heating should be switched off when it is no longer needed. Energy is
otherwise wasted.
In the event of a fault, the electric exterior mirrors can be adjusted by hand by pressing
on the outer edge of the mirror.
Some settings can be stored in the user accounts of the personalisation function and
therefore change automatically when the user account changes (→ Personalisation,
Description).
English 