2008-2017 Volkswagen Golf 4 Door Rear Assist -> Operation User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Rear Assist -> Operation for Your Volkswagen Golf 4 Door Sixth Generation (2008-2017)

Switch on the ignition (but do not start the engine).  
Apply the parking brake to help prevent the vehicle from moving Parking brake.  
Shift into Reverse (R).  
Wet the camera lens with a commercially available alcohol-based glass cleaner and clean with a  
dry cloth ⇒  
.
Remove snow with a brush.  
Remove ice with deicer spray ⇒  
Shift the vehicle out of Reverse (R).  
Switch off the ignition.  
.
NOTICE  
Never use abrasive cleaning agents to clean the camera lens.  
Never remove snow or ice on the camera lens with warm or hot water. This can damage the  
camera lens.  
Applicable only in the United States  
Operation  
Fig. 142 In the Infotainment system: Rearview camera display (display may vary depending on vehicle  
equipment).  
Please first read and note the introductory information and heed the WARNINGS  
Key for displays fig. 142  
Symbol  
Meaning  
Depending on vehicle equipment: Switch the PDC display on.  
Depending on vehicle equipment: Switch the PDC display off.  
Close the current display.  
Depending on vehicle equipment: Switch the PDC sound on or off.  
Key for displays fig. 142  
Meaning  
Symbol  
Setting display: brightness, contrast, color.  
Depending on vehicle equipment: Display PDC.  
Switching the Rear Assist camera on and off.  
The Rear Assist rearview camera switches on and off automatically.  
Function  
Action with the ignition on  
Vehicles without Park Distance  
Control  
Vehicles with Park Distance  
Control  
Switch on the display  
automatically:  
Shift into Reverse (R).  
Switch off the display  
automatically:  
Switch off the ignition.  
OR: Drive forward faster than 6 mph (10 km/h) or for longer than  
10 seconds.  
OR: Shift out of Reverse (R) and  
wait about 10 seconds.  
OR: Shift out of Reverse (R)  
(display switches off immediately).  
Switch off the display  
manually:  
Press one of the Infotainment system buttons or tap the function key on  
the screen.  
OR: Tap the function key .  
The PDC full screen mode is  
displayed page 264.  
Shift out of Reverse (R), then shift back into Reverse (R).  
OR: Tap the function key .  
Show the display again:  

Related Topics

Popular Owner Manuals