Once you have installed the base carrier correctly, you can secure the roof rack on the base carrier
according to the manufacturer's instructions.
Mounting the roof rack base carrier and roof rack on 4-door vehicles
Always attach the base carrier and roof rack correctly.
Always carefully follow the installation instructions from the base carrier or roof rack manufacturer.
The front mounting holes are on the underside of the roof frame. They are sealed with plastic screws
that must be removed before installation ⇒ fig. 99 (magnified view on left). The rear markings for the
base carrier are on the underside of the roof frame (magnified view on right).
The holes and markings are only visible when the door is open.
Only mount the roof rack base carrier on the markings shown in the illustration.
Once you have installed the base carrier correctly, you can secure the roof rack on the base carrier
according to the manufacturer's instructions.
WARNING
Installing or using a base carrier or roof rack improperly can cause the entire system to fly off
the vehicle, causing accidents and injuries.
ꢀ
ꢀ
ꢀ
Always follow the installation instructions provided by the manufacturer.
Use the base carrier and roof rack only if they are undamaged and properly installed.
Secure the roof rack base carrier only at the attachment points shown in the illustration
⇒ fig. 98 or ⇒ fig. 99.
ꢀ
Always install the base carrier and roof rack properly.
ꢀ
Make sure that all bolts and fasteners are properly installed and properly tightened before
every trip and retighten them as needed after driving a short distance. During a long trip,
check all bolts and fasteners at each stop.
ꢀ
ꢀ
Always properly install special fixtures for items such as bicycles, skis, surfboards, etc.
Do not modify or repair the base carrier or roof rack.
Follow the installation instructions provided for installing the roof rack system. Always carry them
in the vehicle.
Securing a load on the roof rack
ꢀ Please first read and note the introductory information and heed the WARNINGS
It is not possible to secure a load unless the roof rack system has been properly installed ⇒
Maximum permissible roof load
.
The maximum permissible roof load is 165 lbs. (75 kg). The roof load is the combined weight of the
roof rack and the items being carried on the roof ⇒
.
Be sure you know the weight of the roof rack and the items you want to transport on the roof. Weigh
them if necessary. Never carry a total of more than the maximum permissible roof load.
When using a roof rack with a lower load limit, do not load the rack to the maximum weight mentioned
above. In this case, you may only load the roof rack to the weight limit specified in the system's
installation instructions.
English 
