2008-2017 Volkswagen Golf 4 Door Tire Pressure Monitoring System (TPMS) -> TPMS and recalibration through the Infotainment system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Tire Pressure Monitoring System (TPMS) -> TPMS and recalibration through the Infotainment system for Your Volkswagen Golf 4 Door Sixth Generation (2008-2017)

WARNING  
Failure to heed warning lights and instrument cluster text messages can cause the vehicle to  
break down in traffic and result in a collision and serious personal injury.  
Never ignore warning lights or text WARNINGS.  
Always stop the vehicle as soon as it is safe to do so.  
NOTICE  
Failure to heed warning lights or text WARNINGS can result in vehicle damage.  
If the ignition is switched on, an acoustic warning sounds when low tire pressure is detected. An  
acoustic warning also sounds if a system malfunction is detected.  
Driving for a longer period of time on rough roads or with a dynamic and sporty style can make  
the TPMS system temporarily unavailable. The indicator light will light up, signaling a malfunction, but  
will go out again once the road condition or driving style changes.  
Tire Pressure Monitoring System (TPMS) and recalibration through the  
Infotainment system  
Please first read and note the introductory information and heed the WARNINGS  
Your vehicle's Tire Pressure Monitoring System (TPMS) indirectly checks the tire pressure of all 4 tires  
while you are driving by using the Anti-lock Brake System (ABS) sensors to monitor the tread  
circumference (rolling circumference) and vibration characteristics of the individual tires.  
The tread circumference of a tire can change:  
If a tire's inflation pressure is too low.  
If the tire's tread is damaged or the tire is structurally damaged.  
If one side of the vehicle is more heavily loaded than the other.  
If there is more weight on one axle than the other (such as when towing a trailer).  
If a compact spare wheel has been mounted.  
If a wheel was replaced on each axle.  
If a tire was changed.  
If the tire pressure was changed, or wheels were rotated or replaced, but the TPMS was not reset.  
If there are snow chains on the tires. Using snow chains can cause the system to give false  
warnings because snow chains increase tire circumference.  
The Tire Pressure Monitoring System may not react at first or may not react at all when you are driving  
in a sporty manner, or on snow-covered or unpaved roads, when you are driving with snow chains, or  
in certain other situations. A change in the tread circumference of a tire is signaled by the Tire  
Pressure Monitoring System indicator in the instrument cluster (telltale).  
The tire pressure recommended for the tires originally installed on the vehicle is on a sticker on the  
driver door jamb Tires and wheels.  
Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the  
inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation  
pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle  
placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those  
tires.)  
As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System  
(TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly  
underinflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check  
your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly  
underinflated tire causes the tire to overheat and can lead to tire failure. Underinflation also reduces  
fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.  
Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s  
responsibility to maintain correct tire pressure, even if underinflation has not reached the level to  
trigger illumination of the TPMS low tire pressure telltale.  
Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system  
is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure  
telltale. When the system detects a malfunction, the telltale will flash for approximately 1 minute and  
then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups  
as long as the malfunction exists.  
When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire  
pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation  
of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning  
properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on  
your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue  
to function properly.  
Resetting and recalibrating the benchmark tire pressure  
Resetting the tire pressures in the Infotainment system resets the benchmark tire pressure used by the  
TPMS to the current tire pressure in the tires based on the circumference of the tires.  
Switch on the ignition.  
Press the ꢀꢁꢂ Infotainment button Menu and system settings (SETUP).  
Tap the function key to open the Vehicle settingsmenu.  
Tap the Tires function key.  
Tap the SET function key in the Tire pressure monitoring systemmenu.  
If all 4 wheels are set to the correct values, touch the Confirm function key to store the tire  
pressures.  
Touching the Cancel button will prevent the current tire pressures from being stored and the  
system will not be recalibrated.  
The recalibration must be performed each time the tire pressure in one or more tires has been  
adjusted or after one or more tires has been changed, exchanged, or repaired. The new tire pressures  
are stored in the system only after at least 20 minutes of normal driving.  
If you have reset the benchmark tire pressure when your tires do not have the correct tire pressure,  
this will prevent the TPMS from working properly. It may then give false warnings or may not give any  
warning even if the tire pressure is too low.  
For this reason, it is vital to make certain that all four tires are inflated to the correct pressure  
when they are cold, before calibrating the system. Cold tire tires are tires that have not been driven  
more than a couple of miles (kilometers) at low speed within the last 3 hours.  
During normal vehicle operation, the system calibrates itself to the tires installed and the changed tire  
pressures. The calibrated values are stored and monitored after a long journey at various speeds.  
If the wheels are loaded more heavily than normal, for example, if the vehicle is carrying heavy load,  
the tire pressure must be raised to the recommended full-load tire pressure before recalibaration  
Tires and wheels.  
Recalibrate the system to reset the benchmark TPMS pressure in the following  
situations:  
After installing tires on your vehicle that have recommended cold tire inflation pressures that are  
different from the tires that were taken off.  
After any tire on your vehicle is removed and then remounted, even if the same tire and wheel rim  
that were taken off are reinstalled (for instance, after repair).  
After any tire on your vehicle is changed and replaced by another tire, even if the replacement tire  
is the same type and is inflated to the same pressure as the tire it replaced.  
After adjusting the tire pressure of any tire on the vehicle to its correct cold tire inflation pressure,  
either by putting air in one or more tires or by letting air out. Do this even though air was only added  
(or let out) to bring the tire to the inflation pressure it should have had all along.  
After rotating the front and rear wheels Tires and wheels.  
After mounting the compact spare wheel.  
WARNING  
Incorrect recalibration can cause the TPMS to give false warnings or to give no warning  
despite dangerously low tire pressure. Make certain the tire inflation pressure of all tires is  
correct before recalibrating the system.  
WARNING  
Incorrect tire pressure can cause sudden tire failure, loss of vehicle control and serious  
personal injury.  
Always check and correct air pressure in all 4 tires, particularly after changing,  
exchanging, or repairing tires.  
After that, always make sure that all 4 tires are inflated to the correct tire pressure for the  
tires installed on the vehicle. Then recalibrate the system so that it can properly monitor the  
pressure in the tire.  
See the tire pressure label Tire inflation pressure and the Owner's Literature for  
recommended cold tire inflation pressure and other important information.  
When replacing tires or wheel rims, always read and heed all of the information and  
WARNINGS Tires and wheels.  
The Tire Pressure Monitoring System must be recalibrated whenever you remove and  
remount or change any wheel or tire on the vehicle, even if the reinstalled or replacement  
wheels and tires are identical to those that were removed and even if the tire pressure does  
not change.  
The Tire Pressure Monitoring System stops working if there is an ESC/ABS malfunction  
Braking and parking.  
After a low tire pressure warning, the vehicle must stand and must not be driven for at least  
1 minute before the new benchmark tire pressures can be stored.  

Related Topics

Popular Owner Manuals