2017-2020 Volkswagen Golf 4 Door Safety -> Safety belts User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety -> Safety belts for Your Volkswagen Golf 4 Door Seventh Generation (2017-2020)

adjusting the proper distance to the steering wheel, grasp the top of the steering wheel with your elbows slightly bent.  
Always hold the steering wheel on the outside of the steering wheel rim with your hands at the 9 o'clock and 3 o'clock positions to help reduce the risk of  
personal injury if the driver's airbag inflates.  
Never hold the steering wheel at the 12 o'clock position or with your hands at other places inside the steering wheel rim or on the steering wheel hub. Holding  
the steering wheel the wrong way can cause serious injuries to the hands, arms, and head if the driver's airbag inflates.  
Adjust the steering wheel so that the steering wheel cover points at your chest and not at your face. Pointing the steering wheel toward your face decreases  
the ability of the driver's airbag to help protect you in a collision.  
Adjust the driver's seat so that you can easily push the pedals all the way to the floor while keeping your knee(s) slightly bent. The distance to the instrument  
panel in the knee area must be at least 4 inches (10 cm) ⇒ Fig. 25Ⓑꢀ.  
Adjust the seat height so that the top point of the steering wheel can be reached.  
Always keep both feet in the footwell so that you are in control of the vehicle at all times.  
Passenger - front seat adjustment:  
Push the passenger seat as far back as possible in order to ensure optimum protection if the airbag is deployed.  
Safety belts  
Introduction to the subject  
In this chapter you will find information on the following subjects:  
⇒ Warning lightꢀ  
⇒ Frontal collisions and laws of physicsꢀ  
⇒ What happens to passengers not wearing a safety belt ꢀ  
⇒ Safety belts protectꢀ  
⇒ Using safety beltsꢀ  
⇒ Fastening and unfastening safety beltsꢀ  
⇒ Safety belt positionꢀ  
⇒ Safety belt height adjustersꢀ  
⇒ Safety belt extenderꢀ  
⇒ Safety belt retractor, pretensioner, load limiter ꢀ  
⇒ Service and disposal of belt pretensioners ꢀ  
Properly worn safety belts are the single most effective means of reducing the risk of serious injury and death in a collision or other accident.  
Damage to safety belts reduces their overall effectiveness and increases the risk of serious personal injury and death whenever the vehicle is being used.  
Check the condition of all safety belts regularly.  
If a safety belt shows damage to webbing, bindings, retractors or buckles, have the safety belt replaced by an authorized Volkswagen dealer or an authorized  
Volkswagen Service Facility ⇒ ꢀ.  
WARNING  
Not wearing a safety belt or wearing an improperly positioned safety belt increases the risk of severe personal injury or death. Safety belts offer optimum  
protection only when they are used properly.  
Properly worn safety belts are the single most effective means of reducing the risk of serious injury and death in a collision or other accident. For this  
reason, always wear your safety belt properly and make sure all passengers wear their safety belts properly as well whenever the vehicle is moving.  
The driver must always make sure that every person in the vehicle is properly seated on a seat of his or her own, properly fastens the safety belts  
belonging to that seat before the vehicle starts to move, and keeps the belts properly fastened while riding in the vehicle. This applies even when just  
driving around town. Therefore, always wear your safety belts and make sure that everybody in your vehicle is properly restrained.  
Always secure children in the vehicle with a restraint system appropriate for their age, weight and height ⇒ Child safety and child restraints ꢀ.  
Always fasten safety belts correctly before driving off and make sure that all passengers are properly restrained.  
Never attach the safety belt to the buckle of another seat. Attaching the safety belt to the wrong buckle will reduce safety belt effectiveness and can cause  
serious personal injury.  
48  
Never let any objects or liquids get into the safety belt latch and prevent it from working properly.  
Never remove a safety belt while the vehicle is moving. Doing so will increase your risk of being injured or killed.  
Never strap more than one person, including small children, into any single safety belt.  
Never let children or babies ride sitting on your lap, and never place a safety belt over a child sitting on your lap.  
Never wear belts over rigid or breakable objects in or on your clothing, such as eyeglasses, pens, keys, etc., as these may cause injury.  
Several layers of heavy clothing (such as a coat worn over top of a sports jacket) may interfere with proper positioning of the safety belt and reduce the  
overall effectiveness of the system.  
Never use comfort clips or devices that create slack in the shoulder belt. However, special clips may be required for the correct use of some child restraint  
systems.  
Safety belts offer optimum protection only when the seat backrest is upright and belts are correctly positioned on the body.  
WARNING  
Damage to safety belts reduces their overall effectiveness and increases the risk of serious personal injury and death whenever the vehicle is being used.  
Never let safety belts become damaged by being caught in the door or seat hardware.  
Torn or frayed safety belts can tear, and damaged safety belt hardware can break in an accident.  
Inspect belts regularly for damage. If webbing, bindings, buckles, or retractors are damaged, have the belts replaced immediately with the correct  
replacement belts approved by Volkswagen for your vehicle, model, and model year.  
Safety belts that were subject to stress in an accident and stretched must be replaced with a correct, new safety belt, preferably by an authorized  
Volkswagen dealer or authorized Volkswagen Service Facility.  
Replacement after a crash may be necessary even if a safety belt shows no visible damage. Anchorages that have been loaded must also be inspected.  
Damaged safety belts must be replaced; they cannot be repaired.  
Never try to repair a damaged safety belt yourself. Never remove or modify the safety belts in any way.  
Have safety belts, bindings, retractors and buckles replaced by an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Always keep the belts clean. Dirty belts may not work correctly and can impair the function of the inertia reel.  
Warning light  
Fig. 26 Warning light in the instrument cluster.  
Read and follow the introductory information and safety information first ⇒ Introduction to the subjectꢀ  
Lights up or flashes  
Possible cause  
Driver and/or front passenger have not fastened their safety belts, if front  
passenger seat is occupied.  
Proper response  
Fasten safety belts.  
When the ignition is switched on, several warning and indicator lights come on briefly for a function check. They go out after a few seconds.  
A warning chime also sounds.  
The safety belt warning light comes on for 6 seconds when the ignition is switched on. A warning chime also sounds for up to 6 seconds if the driver's safety belt  
is not buckled. The chime stops sooner if the driver buckles his or her safety belt. The warning light and the chime go out when both driver and front passenger hav  
buckled their safety belts.  
If the driver and front seat passenger do not both fasten their safety belts within about 24 seconds after the chime stops and the vehicle is moving at a speed of  
more than about 15 mph (25 km/h), the chime will again sound for about 6 seconds, then go off for about 24 seconds, then sound again for about another  
6 seconds. The same thing happens if one of the safety belts is fastened and then unfastened while the vehicle is moving. The safety belt warning light also  
flashes. The warning chime continues to sound at 24 second intervals for up to 2 minutes. No chime sounds at speeds of less than about 5 mph (8 km/h).  
If the ignition is switched on, the safety belt warning light  
stays on until the driver and front passenger have both buckled their safety belts.  
49  
WARNING  
Not wearing a safety belt or wearing an improperly positioned safety belt increases the risk of severe personal injury or death. Safety belts offer optimum  
protection only when used correctly.  
Frontal collisions and laws of physics  
Fig. 27 A vehicle with passengers not wearing safety belts approaches a wall.  
Fig. 28 A vehicle with passengers not wearing safety belts hits a wall.  
Read and follow the introductory information and safety information first ⇒ Introduction to the subjectꢀ  
The physical principles of a frontal collision are simple. Both the moving vehicle and the passenger possess energy ⇒ Fig. 27ꢀ, which varies with vehicle speed an  
body weight. Engineers call this energy kinetic energy.  
The higher the speed of the vehicle and the greater the vehicle's weight, the more energy has to be absorbed in a crash.  
Vehicle speed is the most significant factor. If your speed doubles (for example, from 15 mph to 30 mph – 25 km/h to 50 km/h), the energy increases 4 times!  
Because the occupants of the vehicle in the above example are not using safety belts, they are not attached to the vehicle. In a frontal collision, they will keep  
moving at the same speed the vehicle was moving just before the crash, until something stops them - here, the inside of the passenger compartment. Because the  
occupants of the vehicle in the example are not wearing safety belts, their entire kinetic energy will be absorbed by impact with the wall ⇒ Fig. 28ꢀ.  
The same principles apply to people in a vehicle that is in a frontal collision on the highway. Even at city speeds of 20–30 mph (30–50 km/h), the forces acting on th  
body can reach one ton (2,000 lbs or 1,000 kg) or more. At greater speeds, these forces are even higher.  
Of course, the laws of physics don't apply just to frontal collisions; they determine what happens in all kinds of accidents and collisions.  
What happens to passengers not wearing a safety belt  
Fig. 29 The unbelted driver is thrown forward.  
Fig. 30 Unbelted passengers in the rear seats are thrown forward on top of the belted driver.  
Read and follow the introductory information and safety information first ⇒ Introduction to the subjectꢀ  
Many people believe that it is possible to resist the forces of an impact by holding tight or bracing themselves. That is simply not true!  
50  
Even at low collision speeds, the forces acting on the body are too much for the body to be held in the seat with the arms and hands. In a frontal collision,  
unrestrained occupants will slam violently into the steering wheel, instrument panel, windshield or anything else in the way ⇒ Fig. 29ꢀ.  
Never rely on airbags alone for protection. Even when they deploy, airbags provide only additional protection. Airbags are not supposed to deploy in all kinds of  
accidents. Even if your vehicle is equipped with airbags, all vehicle occupants, including the driver, must wear safety belts correctly in order to minimize the risk of  
severe injury or death in a crash, regardless of whether a seating position has an airbag or not.  
An airbag will deploy only once. Safety belts are always there to offer protection in those accidents in which airbags are not supposed to deploy or when they have  
already deployed. Unbelted occupants can also be thrown out of the vehicle, causing even more severe injuries or death.  
It is also important for occupants in the rear seats to wear their safety belts properly since they can be thrown violently forward through the vehicle in the event of an  
accident. Unbelted passengers in the rear seats endanger not only themselves but also the driver and other passengers in the vehicle ⇒ Fig. 30ꢀ.  
Safety belts protect  
Fig. 31 Belted driver secured by the correctly worn safety belt in the event of a sudden braking maneuver.  
Read and follow the introductory information and safety information first ⇒ Introduction to the subjectꢀ  
Used properly, safety belts can make a big difference. Safety belts help to keep passengers in their seats, gradually reduce energy levels applied to the body in a  
collision, and help prevent the uncontrolled movement that can cause serious injuries. In addition, safety belts reduce the danger of being thrown out of the vehicle  
⇒ Fig. 31ꢀ.  
Safety belts attach passengers to the car and give them the benefit of being slowed down more gently or softly through the give in the safety belts, crumple zones,  
and other safety features (such as airbags) engineered into today's vehicles. The front crumple zones and other passive safety features (such as the airbag system  
are also designed to absorb kinetic energy. By absorbing the kinetic energy over a longer period of time, the forces on the body become more tolerable and less  
likely to cause injury.  
Although these examples are based on a frontal collision, safety belts can also substantially reduce the risk of injury in other kinds of crashes. So, whether you're o  
a long trip or just going to the corner store, always buckle up and make sure that others do, too.  
Accident statistics show that vehicle occupants properly wearing safety belts have a lower risk of being injured and a much better chance of surviving a collision.  
Properly using safety belts also greatly increases the ability of the supplemental airbags to do their job in a collision. For this reason, wearing a safety belt is  
required by law in most countries including the United States and Canada.  
Although your Volkswagen is equipped with airbags, you still have to wear the safety belts provided. Front airbags, for example, are activated only in some frontal  
collisions. The front airbags are not activated in all frontal collisions, in side and rear collisions, in rollovers, or in cases when the conditions for deployment stored in  
the electronic control unit are not met. The same goes for the other airbag systems on your Volkswagen.  
So always wear your safety belt and make sure that everybody in your vehicle is properly restrained!  
Using safety belts  
Read and follow the introductory information and safety information first ⇒ Introduction to the subjectꢀ  
Checklist  
Using safety belts ⇒  
ꢀ
Damage to safety belts reduces their overall effectiveness and increases the risk of serious personal injury and death whenever the vehicle is being used.  
Check the condition of all safety belts regularly.  
Keep safety belts clean.  
Keep objects and liquids away from safety belt webbing, the safety belt buckle tongue, and the safety belt buckle latch and opening.  
Do not pinch or damage the safety belt or buckle tongue (for instance, when closing a door).  
Never modify, disassemble or try to repair safety belts and safety belt anchorages.  
Always fasten your safety belt properly before driving and keep it fastened whenever the vehicle is moving.  
51  
Twisted safety belt  
If it is difficult to pull the safety belt out of the belt guide, the belt may be twisted inside the side trim because the belt retracted too quickly when it was taken off.  
Hold the safety belt tongue, slowly and carefully pull safety belt all the way out.  
Untwist the safety belt and slowly return the belt by hand.  
If you cannot untwist the safety belt, wear it anyway. Make sure that the safety belt is twisted in a spot where it does not come in direct contact with your body. Have  
the safety belt untwisted immediately by an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Lockable safety belt  
The retractors for the rear seat safety belts and the front passenger safety belt have a switchable locking feature for child restraints in addition to the emergency  
locking feature. Whenever a child restraint is installed with a safety belt, the safety belt must be locked so that the safety belt webbing cannot unreel. The switchabl  
locking feature lets you lock the belt so that a child restraint can be properly installed and, for example, so that it can't tip to the side when the vehicle goes around a  
corner ⇒ Child safety and child restraints ꢀ.  
To see whether a safety belt is lockable, pull the safety belt all the way out of the safety belt retractor. You should then hear a clicking sound as the belt winds back  
into the retractor reel. Test the switchable locking feature by pulling on the belt. When the switchable locking feature is active, you should no longer be able to pull  
the belt out of the retractor.  
The locking feature must be deactivated when a vehicle occupant uses the safety belt.  
WARNING  
Improper use and care of safety belts increases the risk of severe personal injury or death.  
Regularly check safety belts and related parts for damage.  
Damaged safety belts must be replaced; they cannot be repaired.  
Always keep safety belts clean.  
Never catch, damage or chafe safety belt webbing on sharp edges.  
Always keep objects and liquids away from the belt buckle and buckle opening.  
Fastening and unfastening safety belts  
Fig. 32 Inserting the buckle tongue into the belt buckle.  
Fig. 33 Releasing the buckle tongue from the belt buckle.  
Read and follow the introductory information and safety information first ⇒ Introduction to the subjectꢀ  
Properly worn safety belts help to hold occupants in their seats and provide optimum protection during braking or in a collision or other accident  
⇒
ꢀ.  
The switchable locking feature makes a clicking sound when the safety belt is winding back onto the safety belt retractor wheel after being pulled all the way out.  
Whenever a child restraint is installed with a safety belt, the safety belt must be locked so that the safety belt webbing cannot unreel ⇒ Child safety and child  
restraintsꢀ. If active, deactivate the locking feature before using the safety belt to restrain a person without a child restraint system.  
Fastening safety belts  
Always buckle your safety belt before driving.  
Adjust the front seat and head restraint correctly ⇒ Seats and head restraintsꢀ.  
Make sure the seat backrest of the rear seat bench is in an upright position and securely latched in place before using the safety belt  
⇒
ꢀ.  
Hold the safety belt by the tongue and pull it slowly and evenly across the chest and pelvis. Do not twist the safety belt webbing ⇒ ꢀ.  
52  
Insert the tongue into the correct buckle for your seat until you hear it latch securely ⇒ Fig. 32ꢀ.  
Pull on the safety belt to make sure that it is securely latched in the buckle.  
Unfastening safety belts  
Unfasten safety belts only when the vehicle is not moving ⇒ ꢀ.  
Press the red button on the buckle ⇒ Fig. 33ꢀ. The buckle tongue is ejected.  
Let the belt wind up on the retractor as you guide the belt tongue to its stowed position to help prevent the safety belt from twisting and to help avoid damage  
to the interior trim.  
WARNING  
Improperly positioned safety belts can cause serious personal injury or death in an accident.  
Safety belts offer optimum protection only when the seat backrest is upright and belts are correctly positioned on the body.  
A person who is not properly restrained can be seriously injured by the safety belt itself if it slips from the stronger parts of the body into sensitive areas like  
the abdomen.  
Unfastening safety belts while the vehicle is in motion can cause severe personal injury or death in the event of an accident or braking maneuver!  
Safety belt position  
Fig. 34 Proper safety belt positioning and head restraint adjustment.  
Fig. 35 Proper safety belt positioning for expectant mothers.  
Read and follow the introductory information and safety information first ⇒ Introduction to the subjectꢀ  
Wearing safety belts improperly can cause serious injury or death. Safety belts can only work when they are correctly positioned on the body. A properly worn safet  
belt also helps to position the occupant so that an airbag can provide maximum protection when deployed. Therefore, always fasten your safety belt and make sure  
that it is properly positioned over your body.  
Improper seating positions reduce the effectiveness of safety belts and even increase the risk of injury or death by moving the safety belt to critical areas of the  
body. Improper seating positions also increase the risk of severe injury or death when an airbag deploys and strikes an occupant who is not seated properly  
⇒ Sitting properly and safelyꢀ.  
Proper safety belt position  
The shoulder portion of the safety belt must always run over the center of the shoulder and never over the throat, over the arm, under the arm or behind the  
back.  
The lap portion of the safety belt must always run as low as possible over the pelvis and never over the abdomen.  
Always wear the safety belt flat and snug against the body. Pull on the safety belt to tighten if necessary.  
Expectant mothers must always wear the lap portion of the safety belt as low as possible across the pelvis and below the rounding of the abdomen – throughout  
the pregnancy. The safety belt must lie flat against the body to avoid pressure against the abdomen ⇒ Fig. 35ꢀ.  
Adjusting safety belt height  
The safety belt position can be adjusted using the following features:  
Safety belt height adjusters for the front seats.  
Front seats with height adjustment.  
53  
WARNING  
Improperly positioned safety belts can cause serious personal injury in an accident or a sudden braking maneuver.  
Always make sure that all vehicle occupants are correctly restrained and stay in a correct seating position whenever the vehicle is being used.  
Safety belts offer optimum protection only when the seat backrest is upright and belts are correctly positioned on the body.  
A loose-fitting safety belt can cause serious injuries by shifting its position on your body from the strong bones to more vulnerable soft tissue and cause  
serious injury.  
The shoulder belt portion of the safety belt must be positioned over the middle of the occupant's shoulder and never across the neck or throat.  
The safety belt must lie flat and snug on the occupant's upper body.  
Never wear the shoulder part of the safety belt under your arm or otherwise out of position.  
The lap portion of the safety belt must be positioned as low as possible across the pelvis and never over the abdomen. Make sure the belt lies flat and snug  
against the pelvis. Pull on the safety belt to tighten if necessary.  
Expectant mothers must always wear the lap portion of the safety belt as low as possible across the pelvis and below the rounding of the abdomen.  
Do not twist the belt when attaching it. If you cannot untwist a twisted safety belt, wear it anyway, but make sure the twisted part is not in contact with your  
body. Have the problem corrected right away by an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Never hold the safety belt away from your body with your hand.  
Never wear belts over rigid or breakable objects, such as eyeglasses, pens or keys.  
Never modify the position of the belt using comfort clips, loops or similar devices.  
If you have a physical impairment or condition that prevents you from sitting properly on the seat with the safety belt properly fastened, special modifications  
to your vehicle may be necessary. Contact your authorized Volkswagen dealer or authorized Volkswagen Service Facility or call the Volkswagen Customer  
CARE Center at 1-800-822-8987 for information about possible modifications to your vehicle.  
Safety belt height adjusters  
Fig. 36 Next to the front seats: Safety belt height adjuster.  
Read and follow the introductory information and safety information first ⇒ Introduction to the subjectꢀ  
Safety belt height adjusters for the front seats can be used to adjust the height of the shoulder portion of the safety belt so that it is positioned correctly:  
Pinch the safety belt attachment together as indicated by the arrows and hold ⇒ Fig. 36ꢀ.  
Slide the belt and upper attachment up or down until the safety belt is positioned over the center of the shoulder ⇒ Safety belt positionꢀ.  
Release the safety belt attachment.  
Pull on the safety belt to make sure that the upper attachment is securely locked in place.  
WARNING  
Never adjust the height of the safety belt while driving.  
Safety belt extender  
54  
Fig. 37 A safety belt extender properly attached to the factory-installed safety belt.  
Fig. 38 Positioning of the safety belt extender.  
Read and follow the introductory information and safety information first ⇒ Introduction to the subjectꢀ  
If a safety belt is too short to correctly fit you or one of your passengers, even when the safety belt is pulled out all the way, you can use a safety belt extender.  
Never use the safety belt extender for any other purpose – including the attachment of a child restraint.  
The extender adds about 8 inches (20 cm) to the safety belt. Always remove the safety belt extender when it is not needed and stow it safely. Contact an authorized  
Volkswagen dealer or authorized Volkswagen Service Facility if you believe you may need an extender.  
Key to⇒ Fig. 37ꢀ:  
Vehicle safety belt buckle.  
Buckle tongue on the safety belt extender.  
Safety belt buckle on the safety belt extender.  
Safety belt buckle tongue on the factory-installed safety belt.  
Key to⇒ Fig. 38ꢀ:  
Safety belt buckle on the safety belt extender.  
Distance between the safety belt buckle on the safety belt extender and the centerline of the person using the safety belt extender. The distance must be  
more than 6 inches (15 cm)!  
Centerline of the person using the safety belt extender.  
Using a safety belt extender  
Adjust both the seat and the head restraint properly ⇒ Seats and head restraintsꢀ.  
Insert the buckle tongue on the safety belt extender ⇒ Fig. 37②ꢀ into the vehicle belt buckle for the seat where the safety belt extender is being used  
⇒ Fig. 37①ꢀ.  
Fastening or unfastening the vehicle safety belt ⇒ Fastening and unfastening safety belts ꢀ.  
Pull the belt to make sure that the tongues are securely locked in the buckles.  
Make sure that the safety belt is positioned properly ⇒ Safety belt positionꢀ.  
Properly using safety belt extenders:  
Use a safety belt extender only when the factory installed safety belt is too short when worn properly by a person in proper seating position.  
Only use one safety belt extender per seat and vehicle safety belt.  
Always remove the safety belt extender when it is not needed.  
Never leave a safety belt extender attached to the vehicle safety belt buckle when the extender is not needed and being used with the safety belt. Otherwise,  
the airbag control module will receive an incorrect signal from the safety belt buckle and this will prevent the airbag from working properly for a person who is  
not using the safety belt. Leaving the extender attached to the safety belt buckle when the front seat is occupied and the safety belt is not being used will  
signal the airbag control unit during a collision that the front passenger seat is occupied and that the safety belt is being used. The electronic control unit for the  
airbag system will then receive incorrect information that will cause the safety belt pretensioner to deploy unnecessarily and the front passenger airbag to  
deploy later in collisions that would normally trigger the front airbag earlier in the collision to help protect an unrestrained front seat occupant. The airbag will  
not be able to provide enough protection for an occupant not wearing a safety belt.  
Only use the safety belt extender approved by Volkswagen for your vehicle.  
WARNING  
Improper use or positioning of a safety belt extender increases the risk of serious personal injury and death.  
A driver or passenger who is not properly restrained can be seriously injured by striking the interior of the passenger compartment or by the safety belt  
itself, which can be displaced from stronger parts of the body into sensitive areas like the abdomen.  
Safety belt extenders offer optimum protection only when they are properly used.  
55  
Only use the extender when the belt is not long enough to be worn low and snug and the person is in the correct seating position. Remove and stow  
extender safely when not needed.  
Always make sure the safety belt tongue of the safety belt extender is securely inserted into the buckle for the seating position that belongs to the seat  
where the safety belt extender is being used. Attaching the safety belt to the wrong buckle will reduce safety belt effectiveness and can cause serious  
personal injury.  
Never use the safety belt extender if you can properly attach the safety belt without it. Using a safety belt extender when not needed can increase the risk  
of injury, especially in a collision.  
Never use a safety belt extender if the distance (B) between the front edge of the safety belt extender buckle (A) and the centerline of the person using the  
safety belt extender ⇒ Fig. 38Ⓒꢀ is less than 6 inches (15 cm).  
Never leave a safety belt extender attached to the vehicle safety belt buckle when the extender is not needed and being used with the safety belt.  
Otherwise, the airbag control module will receive an incorrect signal from the safety belt buckle and this will prevent the airbag from working properly for a  
person who is not using the safety belt.  
Never use more than one extender with a safety belt. Using more than one extender can change the way the safety belt passes over the body and can  
cause serious injury.  
Never use the safety belt extender to secure a child restraint.  
Never use a safety belt extender on your Volkswagen that you got from another automobile manufacturer or from an automotive parts store.  
Never use the safety belt extender you got for your vehicle for any other vehicle, regardless of make, model, or model year.  
NOTE  
Leaving the extender attached to the safety belt buckle when the front seat is occupied and the safety belt is not being used will signal to the airbag control  
unit that the front passenger seat is occupied and that the safety belt is being used. The electronic control unit for the airbag system will then receive  
incorrect information that will  
cause the safety belt pretensioner to deploy unnecessarily in collisions.  
cause the front passenger airbag to deploy later in collisions in which the front airbag would otherwise be triggered earlier to help protect  
an unrestrained front seat passenger.  
A pretensioner that has deployed cannot be repaired. The entire safety belt must be replaced.  
NOTE  
If the safety belt extender is left attached to the safety belt buckle, the safety belt warning system will sense that the safety belt for that seat is being used. The  
warning light will not come on and the warning chime will not sound even though the seat is occupied and the safety belt is not being used.  
Safety belt retractor, pretensioner, load limiter  
Read and follow the introductory information and safety information first ⇒ Introduction to the subjectꢀ  
The safety belts in the vehicle are part of the vehicle's safety concept ⇒ Airbags and how they workꢀ and consist of the following important features:  
Automatic safety belt retractors  
Every safety belt is equipped with an automatic safety belt retractor on the shoulder belt. As long as the safety belt is pulled out slowly, the shoulder belt will extend  
to let you move freely under normal driving conditions. The automatic safety belt retractor locks the belt when the belt is pulled out fast, during hard braking and in a  
collision. The belt may also lock when you drive up or down a steep hill or through a sharp curve.  
Safety belt pretensioner  
The safety belt retractors for the driver and front seat passenger have a pretensioner that helps take the slack out of the safety belt and tighten it when the  
pretensioner is activated.  
The pretensioners are activated by the electronic control unit for the airbag system in front, side, and rear collisions. By tightening the safety belt, the pretensioner  
helps to reduce the occupant's forward movement. The belt pretensioner works together with the airbag system; its function is monitored by the airbag system  
indicator light. The belt pretensioner will not deploy in a rollover if the side airbags are not activated.  
A fine dust may be released upon activation. This is normal and is not caused by a fire in the vehicle.  
Safety belt load limiter  
The front and rear outboard safety belts also have load limiters to help reduce the forces applied to the body in a crash.  
Heed all safety regulations if the vehicle or individual components of the system have to be scrapped. Your authorized Volkswagen dealer and authorized  
Volkswagen Service Facility are familiar with these regulations ⇒ Service and disposal of belt pretensionersꢀ.  
56  

Related Topics

Safety
General information Sitting properly and safely Airbag system Child safety and child restraints In an emergency

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot