Storage and Equipment for Your Volkswagen ID.5 SUV First Generation (2021-2025)

Infotainment system: Rear Traffic Alert display (illustration).  
Red image segment: close obstacle. The vehicle is at risk. Drive carefully out of the parking space and brake if necessary.  
Yellow image segment: other road users in the vicinity of the vehicle.  
Driving with a trailer  
If a trailer is electrically connected to a factory-fitted towing bracket, Rear Traffic Alert is switched off. After disconnecting the  
electrical trailer connection, Rear Traffic Alert is automatically switched on again.  
Rear Traffic Alert must be switched off and on manually if a non-factory-fitted towing bracket is used.  
WARNING  
Loose objects may be flung through the vehicle interior in the event of a sudden driving or braking manoeuvre. This can lead to loss  
of control over the vehicle and cause accidents and serious or fatal injuries.  
Stow objects only in closed stowage compartments.  
Always keep stowage compartments closed while the vehicle is in motion.  
Do not place mobile devices or similar objects in the stowage system of the rear centre armrest while the vehicle is in motion.  
The coat hooks in the vehicle should only be used for lightweight clothing weighing max. 2.5 kg (approx. 5.5 lbs).  
Never leave any heavy, hard or sharp objects in the pockets of clothing.  
WARNING  
Incorrect use of the drink holders can cause injury. While driving, in the event of a sudden braking manoeuvre or in the event of an  
accident, objects located in the drink holder can be flung about the vehicle and hot drinks spilled. This can cause serious injuries and  
serious scalding.  
Place only soft, break-proof and closed containers in the drink holder.  
Integrated stowage systems in the rear centre armrest must always be used in the locked end positions.  
Never place hot drinks in a drink holder.  
Make sure that only drinks of the appropriate size are placed in the drink holder. Drinks must always be stored securely in the drink  
holder.  
WARNING  
If the glove box is open while driving, objects could be flung through the vehicle interior. This can lead to loss of control over the  
vehicle and cause accidents and serious or fatal injuries.  
Always keep the glove box closed while the vehicle is in motion.  
WARNING  
Any lighters in the vehicle could be damaged or lit without being noticed, for example by high surface temperatures. This could lead  
to serious burns and other injuries.  
Before closing stowage areas or compartments always make sure that there is no lighter in the way.  
Never stow lighters in stowage areas or compartments or on other surfaces in the vehicle.  
WARNING  
Closed drink bottles can explode in the vehicle in extreme heat or burst in extremely cold temperatures and cause serious injuries.  
Never leave closed drink bottles in an extremely hot or extremely cold vehicle for extended periods.  
NOTICE  
Objects kept in the vehicle could be damaged or could cause damage to the vehicle when exposed to strong sunlight or the effects of  
heat or cold.  
Do not stow any temperature-sensitive objects, food or medicines inside the vehicle.  
Please note that objects made of translucent materials, e.g. transparent suction pads on the windows, concentrate sunlight.  
NOTICE  
Depending on equipment, the rear centre armrest may have a stowage system. Folding in the rear centre armrest when the stowage  
system is open can damage the drink holder.  
Before folding in the rear centre armrest, make sure that any objects have been removed and that the integrated stowage systems  
are closed or folded in.  
In the backrest of the middle seat: fold-out rear centre  
armrest (illustration).  
In the rear centre armrest: drink holder (illustration).  
There is a drink holder in the rear centre armrest.  
To fold down: pull the loop on the centre armrest in the direction of the arrow → Fig. 1.  
To fold back: fold the centre armrest upwards in the opposite direction of the arrow and push it into the backrest as far as it will go  
→ Fig. 1.  
Do not use the middle seat on the rear bench seat to transport passengers when the centre armrest is folded down.  
Electrical equipment can be connected to the sockets in the vehicle.  
The 12-volt socket will work only when the ignition is switched on.  
WARNING  
Improper use of the sockets and connected electrical accessories can cause fires and serious or fatal injuries.  
Switch off electrical devices immediately and disconnect them from the power supply if the electrical devices become too warm.  
Please note that sockets and devices connected to them can also be used when the ignition is switched off, e.g. by children in the  
vehicle.  
NOTICE  
Unsuitable, non-approved or incorrectly connected electrical devices can cause damage to the vehicle and the electronic  
components.  
Never connect electrical devices that supply electric power, such as solar panels or a battery charger, to the 12-volt socket to  
charge the 12-volt vehicle battery.  
Use only electrical devices that have been approved in accordance with current guidelines concerning electromagnetic  
compatibility.  
Do not use faulty devices.  
In order to avoid damage due to voltage fluctuations, always switch off any electrical devices before switching the ignition on or  
off and before activating the vehicle’s drive system.  
Observe the operating instructions of the electrical devices.  
NOTICE  
The vehicle’s electrical system can be damaged if the maximum power output is exceeded.  
Never connect electrical devices requiring more than the rated power to a 12-volt socket.  
The 12-volt vehicle battery will be discharged if electrical devices are switched on when the vehicle’s drive system is  
deactivated.  
With some equipment levels, unshielded devices can cause interference with the Infotainment system and vehicle electronics.  
The maximum power of the sockets must not be exceeded. The power consumption of the external devices is specified on their type  
plates.  
12-volt socket  
In the luggage compartment on the left-hand side: fold-open  
12-volt socket (illustration).  
The continuous power of all 12-volt sockets in the vehicle is 120 W in total (→ Sockets).  
The maximum power of a 12-volt socket in the vehicle is a total of 180 W when the vehicle’s drive system is activated.  
NOTICE  
The fuse can blow as a result of extended operation of the 12-volt sockets at maximum power.  
Never use the 12-volt sockets at maximum power for longer than 10 minutes.  
Always use only one 12-volt socket with maximum power.  
NOTICE  
If two or more 12-volt sockets are used simultaneously, the total power consumption of the connected electrical accessories must  
not exceed 190 W.  
Always use only one 12-volt socket with maximum power.  
Mobile devices can be charged in the vehicle either via the installed USB-C connections or wirelessly.  
Charging via the USB-C ports  
The following USB-C ports may be available in the vehicle:  
Identification of a USB port suitable for data transfer and charging.  
Identification of a USB port suitable only for charging.  
Available charging capacity  
Voltages of up to 20 V are made available via the USB port. These voltages permit a charging capacity of up to 45 W.  
Depending on equipment, the following charging profiles can be supported by the USB ports:  
Legacy charging (2.5 W).  
BC1.2 (7.5 W).  
USB-C charging (15 W).  
USB power delivery (up to 45 W).  
The charging capacity actually tapped by the connected device depends on the following:  
Supported charging profiles.  
Charge level of the device.  
Device temperature.  
Charging cables used.  
In the case of double USB ports, the charging capacity can be split between both ports.  
Wireless charging function  
In the centre console: lining mat for the wireless charging  
function (illustration).  
The wireless charging function is dependent on the equipment level and is not available in all countries.  
The wireless charging function enables wireless energy transmission by electromagnetic induction over a short distance for Qi-certified  
mobile telephones.  
The lining mat with shelf area for the wireless charging function is located in the area of the centre console and is designed for only  
one Qi-certified mobile telephone → Fig. 1.  
In some vehicles, the lining mat has a telephone symbol which marks the centre position → Fig. 1.  
The charging capacity is 15 W.  
Qi standard  
The Qi standard enables wireless charging of suitable Qi-certified mobile telephones. Consult the operating instructions for the mobile  
telephone to find out if it is compatible with the Qi standard. An overview of Qi-certified mobile telephones can be found at the  
following external link of Wireless Power Consortium, Inc.:  
Volkswagen AG does not assume any liability for the completeness and correctness of this list. The manufacturer of the mobile  
telephone can provide further information on compatibility, if necessary.  
There may be charging restrictions with mobile telephones that are not Qi-certified.  
The Qi symbol is displayed on the Infotainment system to indicate the wireless charging status.  
Charging a mobile telephone wirelessly  
Prerequisite  
A suitable mobile telephone that is not larger than the marked shelf area and is Qi-certified.  
1. Remove any foreign objects from the stowage compartment before charging →  
.
2. After removing the protective cover and any other foreign material, place the mobile telephone in the centre of the shelf area  
with the display facing upwards and so that its entire surface is flat on the area.  
The charging process starts automatically.  
3. Follow the operating instructions for the mobile telephone.  
The Infotainment system will provide information about the start of the charging operation and, where applicable, about any foreign  
objects with metallic components that are detected in the stowage compartment.  
Depending on equipment, the charging function can be deactivated manually in the Infotainment system.  
Meaning of the Qi symbols  
The white Qi symbol with the On/Off switch indicates that wireless charging is switched off.  
The white Qi symbol indicates that the mobile telephone is being charged.  
The red Qi symbol indicates that wireless charging is not possible.  
Tap the Qi symbol for explanations on the status and to switch on wireless charging if necessary.  
Stowage compartment cover  
In the centre console: open cover of the stowage  
compartment (illustration).  
The stowage compartment for the wireless charging function has a cover for the mobile telephone display.  
The cover can avoid distractions caused by the mobile telephone, such as incoming messages.  
1. Place the mobile telephone in the stowage compartment.  
2. Keep the cover closed when driving so that the mobile telephone display is fully covered →  
.
WARNING  
Notifications on the mobile telephone display can distract the driver. This can lead to an accident and cause serious or fatal injuries.  
Make sure that no objects impede the closing function of the cover.  
If the shelf has a cover, always keep the cover closed while driving.  
WARNING  
Metallic objects on the shelf can become very hot. This can cause burns or fires.  
Do not place any metal or metallic objects on the shelf for the wireless charging function.  
Remove any foreign objects immediately.  
NOTICE  
If cards or objects with a magnetic stripe or chip are placed on the shelf for the wireless charging function, this may damage the data  
stored on them.  
Do not place any ID, bank and credit cards etc. with a magnetic stripe or chip on the shelf for the wireless charging function.  
The mobile telephone can become hot during wireless charging. Keep the ventilation grooves clean as they improve the airflow  
around the mobile telephone → Fig. 1.  
Mobile telephone is not charged  
A message about a foreign object in the stowage compartment may be displayed on the Infotainment system.  
An unfavourable position of the mobile telephone on the lining mat can impair the charging function. This can already be the case in  
the event of small changes in position, e.g. due to vibrations.  
The position of the mobile telephone must be corrected to re-establish the correct charging function.  
1. Align the mobile telephone centrally on the charging area.  
The charging function can also be impaired by metal and above all magnetic parts of a mobile telephone or its protective cover.