Technical data for Your Volkswagen Jetta 4 Door Sixth Generation (2011-2018)

Technical data  
Introduction  
In this section you’ll find information about:  
Important vehicle labels  
Engine data  
Dimensions  
Your vehicle's engine type is shown on the vehicle identification label.  
The specifications in this Manual refer to the base model. The stated values may vary, depending  
upon different equipment or models, as well as with respect to special vehicles and vehicles exported  
to different countries.  
More information:  
Transporting  
Tires and wheels  
Saving fuel and helping the environment  
Fuel  
Engine oil  
Engine coolant  
Consumer information  
WARNING  
Disregarding or exceeding stated values for weights, loads, dimensions and maximum speed  
may result in accidents and serious personal injuries.  
Important vehicle labels  
Fig. 13 Vehicle identification label: Shown in the example with engine identification code CBFA 3.  
Fig. 14 Vehicle identification number (VIN).  
Please first read and note the introductory information and heed the WARNINGS  
Factory-installed safety certificates, stickers, and signs containing important information regarding  
vehicle operation can be found in the engine compartment and on certain vehicle components, such  
as inside the fuel filler flap, on the passenger sun visor, in the driver door jamb, or on the luggage  
compartment floor.  
Do not remove, alter, or render unusable or illegible any safety certificates, stickers, and labels.  
If vehicle components bearing safety certificates, stickers, or labels are replaced, make certain that  
the firm doing the work attaches new conforming certificates, stickers, or labels to the same part of the  
new components.  
Vehicle identification number  
The vehicle identification number is on a plate on top of the instrument panel on the driver side, and is  
visible from the outside through the windshield ⇒ꢀfig. 14 (arrow). The view window is on the side at the  
bottom of the windshield. The vehicle identification number is also stamped into the top of the right drip  
channel in the engine compartment. The drip channel is between the spring strut tower and the right  
fender. Open the engine hood to read the vehicle identification number ,Working in the engine  
compartment.  
Vehicle identification label  
The vehicle identification label ⇒ꢀfig. 13 is affixed to the area of the spare wheel well in the luggage  
compartment and contains the following information:  
(1)  
(2)  
(3)  
Vehicle identification number (VIN)  
Vehicle type, engine output, transmission  
Engine and transmission classification code, paint number, interior. In the example, the engine  
classification code is “CBFA” .  
(4)  
Optional equipment, part numbers  
Safety Compliance Certification Label  
A safety certificate affixed to the door jamb in the driver door confirms that at time of production all  
necessary safety standards and requirements of the traffic safety agency of the respective country  
were met. The month and year of production as well as the vehicle identification number may be listed  
as well.  
Radiator fan and high voltage warning sticker  
A warning sticker about the radiator fan and the high voltage of the electrical system is located in the  
engine compartment next to the engine hood release. The vehicle ignition system complies with the  
Canadian standard ICES-002.  
Tire inflation pressure label  
A tire inflation pressure label is on the driver door jamb, Tires and wheels.  
Fuel grade sticker  
An information sticker listing the correct fuel grade for your vehicle, Refueling.  
Engine data  
Gasoline engines  
Please first read and note the introductory information and heed the WARNINGS  
Maximum power output  
Injection Engine ID  
code  
Maximum torque  
No. of cylinders  
Displacement  
technology  
170 hp at 4800 - 6200  
rpm  
(125 kW at 4800 - 6200  
rpm)  
184 lb-ft at 1500 -  
4750 rpm  
(250 Nm at 1500 -  
4750 rpm)  
CPKA  
CPRA  
1.8L  
4 cylinders  
110 CID  
(1798 ccm)  
TSI®  
4 cylinders  
121 CID  
(1984 ccm)  
115 hp at 5000 rpm  
(85 kW at 5000 rpm)  
CBPA  
2.0L MPI  
125 lb-ft at 4000 rpm  
(170 Nm at 4000 rpm)  
SRE  
Diesel engines  
Maximum power output  
Injection Engine ID  
technology  
Maximum torque  
No. of cylinders  
Displacement  
code  
140 hp at 4000 rpm  
(103 kW at 4000 rpm)  
TDI® with  
DPF  
CJAA  
2.0L  
236 lb-ft at 1750 rpm  
(320 Nm at 1750 rpm)  
4 cylinders  
120 CID  
(1968 ccm)  
Dimensions  
Please first read and note the introductory information and heed the WARNINGS  
Length  
182.2–186.8 in. (4628–4744 mm)  
about 70.0 in. (1778 mm)  
56.6–58.3 in. (1438–1482 mm)  
104.4 in. (2651 mm)  
Width  
Height (unloaded)  
Wheelbase  
Minimum turning circle diameter (wall to wall)1  
about 36.4 ft (about 11.1 m)  
1
Slight differences to these figures are possible, depending on wheel and tire size fitted and the level  
selected.  
Track1, front  
60.1–60.7 in. (1527–1541 mm)  
59.9–60.6 in. (1523–1538 mm)  
Track1, rear  
Ground clearance (unloaded)  
about 3.7–5.5 in. (about 94–139 mm)2  
NOTICE  
Please be careful when parking your vehicle in areas with parking barriers or curbs. These  
vary in height and could damage your bumper and related parts if the front of your vehicle hits  
a barrier or curb that is too high while you are getting into or out of a parking spot.  
Always be careful when you enter a driveway or drive up or down steep ramps or over  
curbs or other obstacles. Parts of the vehicle close to the ground may be damaged (such as  
bumper covers, spoilers, and parts of the engine, suspension, and exhaust systems).  
2
Varies depending on your vehicle's equipment (engine, tires, wheels, tire inflation pressure, driving  
situation and other factors).