Vehicle tool kit for Your Volkswagen Jetta 4 Door Sixth Generation (2011-2018)

Vehicle tool kit  
Introduction  
In this section you’ll find information about:  
Storage  
Contents  
When securing the vehicle after a breakdown, always obey all applicable legal requirements.  
More information:  
Trailer towing  
Working in the engine compartment  
In an emergency  
Changing a wheel  
WARNING  
Loose tools and other items in the vehicle tool kit and a loose spare (or compact spare) wheel  
may be thrown through the passenger compartment if you brake suddenly or steer sharply or  
are involved in an accident. This can cause severe injuries.  
Always make sure the vehicle tool kit and spare (or compact spare) wheel are securely  
stowed in the luggage compartment.  
WARNING  
Improper or damaged vehicle tools can lead to accidents and injury.  
Never work with tools that are damaged or not right for the job.  
323  
Storage  
Fig. 158 In the luggage compartment under the floor panel: Compact spare wheel and vehicle tool kit.  
Please first read and note the introductory information and heed the WARNINGS  
The vehicle tool kit is in the luggage compartment in one of several places, such as under the luggage  
compartment floor panel ⇒ꢀfig. 158.  
Open the luggage compartment lid, Luggage compartment.  
Grasp the floor panel by the handle and lift it up in the direction of the arrow ; remove it if  
necessary.  
Completely retract the jack after use. Otherwise it will not fit in its compartment and cannot be  
stowed safely.  
Contents  
Fig. 159 Contents of the vehicle tool kit.  
Please first read and note the introductory information and heed the WARNINGS  
The contents of the vehicle tool kit depend on the vehicle's equipment. The following describes the  
maximum contents.  
Contents of the vehicle tool kit ⇒ꢀfig. 159  
(1)  
Screwdriver with a hexagonal socket in the handle for removing or inserting previously  
loosened wheel bolts. The screwdriver blade is reversible. The screwdriver may be stored  
under the lug wrench.  
(2)  
(3)  
(4)  
Screw-in towing eye.  
Hubcap puller clip for removing hubcaps, wheel covers, or wheel bolt caps.  
Jack. Before putting the jack back in the foam insert, be sure to completely crank the jack down  
to its original position.  
(5)  
(6)  
Lug wrench.  
Crank.  
325  

Related Topics