Trip memory functions
ꢀ
Please first read and note the introductory information and heed the WARNINGS
The instrument cluster display has 2 automatic memories: 1 – single trip memory and 2 – total trip
memory. The number of the trip memory is shown at the upper right of the display.
The trip memories are in addition to the trip odometer, which is displayed in the bottom part of the
instrument cluster and controlled using the ꢀꢀꢁꢂꢃ button on the right of the instrument panel ⇒ꢀfig. 10
(4).
When the ignition is switched on and memory 1 or 2 is displayed, press the ꢄꢅꢀꢆꢂꢁꢂꢃ button in
the windshield wiper lever to toggle between the two memories.
The memory accumulates and stores information about distance
driven and fuel used from the time the ignition was switched on until
the time it was switched off.
If the ignition stays off for 2 hours or more, stored information is
automatically deleted. If the trip is continued within 2 hours after the
ignition was switched off, the new values are added.
1
2
Single trip memory.
Total trip memory.
The memory displays and stores the accumulated driving and fuel
consumption data of any number of single trips up to a total driving
time of 99 hours and 59 minutes, and up to a total distance of
9,999 miles (9,999 km), depending on the instrument cluster version.
If one of the maximum values is exceeded, then the memory is
automatically cleared and starts again from 0.
English 