and if the correct operating equipment, fluids and suitable tools are available. Work performed incorrectly can result in serious
injuries ⇒ . Have all work performed by suitably qualified professionals if necessary. Volkswagen recommends contacting
an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
WARNING
Coolant is toxic. Contact with coolant, especially swallowing coolant, may result in serious or fatal injuries.
If you swallow coolant, seek urgent medical help.
If you have health problems after working with coolant, seek medical help.
Always store coolant in the sealed original container and keep it out of the reach of children.
Never use empty food cans, bottles, or other containers to store coolant, because someone could drink the coolant
by mistake.
Avoid regular contact with coolant to prevent damage to your skin.
Protect your skin, face and particularly your eyes when working with coolant.
Do not eat, drink or smoke when working with coolant.
Wash your skin with soap and water after working with coolant.
WARNING
In extremely low temperatures, the coolant can freeze and the vehicle could break down. This can cause the heating to
stop working in the vehicle. Vehicle occupants could die of exposure if they do not have sufficient warm clothing.
Make sure that the quantity of coolant additive is adjusted to the lowest expected ambient temperature in which the
vehicle is operating.
Only use coolant additive approved by the manufacturer.
Coolant and coolant additives can pollute the environment.
Collect any leaking fluids and dispose of them according to legal and environmental regulations.
Coolant specification
Please read the introductory information and heed the Warnings and Notice ⇒
hood space.
Safety precautions for working in the
The cooling system is filled at the factory with a mixture of specially prepared water and at least 40% coolant additive G12evo
(TL 744-L).
The proportion of coolant additive must always be at least 40% to protect the cooling system. If greater freeze protection is
needed due to the climate, the proportion of coolant additive can be increased. However, the proportion of coolant additive
must not exceed 55%, because otherwise the freeze protection will be reduced and the cooling effect will be decreased.
The coolant additive can be recognized by its violet color. The mixture of water and coolant additive provides freeze protection
down to approx. -25 °C (approx. -13 °F), protects the light-alloy parts in the cooling system against corrosion, prevents calcium
deposits and significantly increases the boiling point of the coolant.
If the coolant is being topped up, a blend of distilled water and at least 40% of the G12evo coolant additive must be used to
ensure optimum corrosion protection ⇒
.
NOTICE
377