message are displayed for a few seconds.
The sensor areas are dirty or the sensor system's view is limited due to weather conditions, such as snow, or from
detergent residue or coatings. Clean the sensor areas in the front of the vehicle and clean the windshield ⇒ Vehicle care
The sensor areas are impaired by attachments, decorative frames on license plate holders, or labels. Keep the areas
around the sensor system clear ⇒ Sensors and Cameras.
The sensor system is misaligned or damaged, for example as a result of damage to the front of the vehicle or the
windshield. Check if there is noticeable damage ⇒ Sensors and Cameras.
Painting work was carried out on or structural modifications were made to the front of the vehicle or the windshield
⇒ Repairs and technical modifications.
Malfunction or fault. Stop the engine and restart.
If the problem persists, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
If the sensor range is restricted, driver assistance systems may not be available or only to a limited extent. Refer to the
other indicator lights of the driver assistance systems ⇒ Symbols in the instrument cluster .
Additional information may be displayed in the vehicle status, depending on the malfunction ⇒ Vehicle settings menu.
Cruise control system
Introduction
The cruise control system helps to
maintain a set speed.
Speed range
The cruise control system is available at speeds above approximately 20 km/h (approximately 15 mph) when driving forward.
Driving with the Cruise Control System
You can override the stored speed at any time, for example, to pass another vehicle. The regulation function is paused while
the vehicle accelerates and then resumes the stored speed.
Displays
If the cruise control system is switched on, the instrument cluster display indicates the saved speed and the status of the
cruise control system.
One of the following indicator lights will light up, depending on the driving situation:
Cruise control system is switched on, speed regulation active.
Cruise control system is switched on, speed regulation
inactive.
If no speed is stored, the instrument cluster display shows
instead of the speed.
Changing gear
Pressing the clutch pedal pauses the regulation function. It resumes automatically after changing gear.
Driving downhill
The vehicle cannot maintain the saved speed in all driving situations. Always be ready to apply the brakes.
1. Downshift before traveling downhill for extended periods.
This will enable you to utilize the engine braking effect and reduce the load on the brakes.
214