Selected parking space.
Side boundaries of the selected parking space.
Rear boundary of the parking space.
Screen display
Red line: Boundary or safety distance from the vehicle.
Green side line: Extension of the vehicle.
Adjust the
brightness, contrast, and color.
If the camera image has been switched on by engaging the reverse gear, depending on the country, no function keys are
displayed for safety reasons.
1. Tap the Infotainment system screen to show the function keys.
1. Position your vehicle in front of the parking space fig. 123
.
2. Select the reverse gear.
3. Slowly reverse while steering so that the green side lines line up with the selected parking space. The green lines must
line up with the side boundaries of your parking space fig. 123
.
4. Stop when the red horizontal line reaches the rear boundary fig. 123
.
Troubleshooting
Please read the introductory information and heed the Warnings and Notice ⇒
and Safety instructions.
Malfunction of Camera Image of the Rear View Camera System
The camera image is unclear, “flickering” or has been disabled.
A technical malfunction may have occurred.
1. In the event of an unclear camera image, clean the Rear View Camera system ⇒ Exterior care and cleaning.
Or: check whether the parking system has a malfunction due to external factors → page , Troubleshooting.
2. If the problem persists, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
Rear Traffic Alert
The Rear Traffic Alert monitors the
cross traffic behind the vehicle when
reversing out of a space or
maneuvering.
How it works
250
English 