Get Seat functions Guide for Volkswagen Jetta 4 Door Seventh Generation (2019-2025)

Fig. 71 Removing the middle rear head restraint (general example).

1. Release the middle backrest part of the rear bench seat and fold it slightly forward.

2. Slide the head restraint all the way upward.

3. Press the button ﬁg. 71 on the head restraint guide.

4. At the same time, press the ﬁg. 71 button while a second person pulls the head restraint all the way out.

5. Fold the rear bench seat backrest toward the rear and lock it securely into place.

Installing the middle rear head restraint

1. Release the middle backrest part of the rear bench seat and fold it slightly forward.

2. Position the head restraint correctly above the head restraint guides for the middle seat and insert it into the guides on the

backrest.

3. Push the head restraint downward while pressing the ﬁg. 71 button.

4. Fold the rear bench seat backrest toward the rear and lock it securely into place.

5. Adjust the head restraint to the correct position.

Seat functions

Center armrest

Front center armrest

128

Fig. 72 Front center armrest.

Fig. 73 Underside of the front center armrest: plastic supports of the center armrest.

To raise: Pull the center armrest ﬁg. 72 upward and fold the plastic supports in the direction of the arrow ﬁg. 73. Then

press the center armrest down.

To lower: Pull the center armrest ﬁg. 72 upward and fold the plastic supports in the opposite direction to the arrow

ﬁg. 73. Then press the center armrest down.

WARNING

If the front center armrest is opened all the way or not completely closed, it can limit the driver’s ability to move his or her

arms, which can cause accidents and serious injuries.

Always keep the storage compartments closed while driving.

Never allow an adult or child to ride on the center armrest. This incorrect seating position can cause serious

injuries.

129

Rear center armrest

Fig. 74 In the backrest of the center seat: folding rear center armrest.

There may be a folding center armrest in the backrest of the middle seat of the rear bench seat.

To fold forward: pull the center armrest in the direction of the arrow using the loop ﬁg. 74.

To fold back: fold the center armrest upward in the opposite direction of the arrow ﬁg. 74 and press it all the way toward

the seat backrest.

Passengers must not sit in the center rear seat when the center armrest is folded down.

WARNING

Incorrect use of the rear center armrest may cause serious injuries.

If the center armrest is folded down, the center rear bench seat must never be used by either adults or children.

Never allow an adult or child to ride on the center armrest.

WARNING

Objects that are not secured or are secured incorrectly in the rear center armrest may be thrown around during sudden

braking or driving maneuvers and can cause serious injuries.

Store objects such as drinks in the storage compartments provided ⇒

Introduction.

NOTICE

Incorrect handling of the rear center armrest can cause damage to the seat and the center armrest.

Remove all objects before folding back the rear center armrest.

130

Memory function

Memory buttons

Fig. 75 On the outer side of the driver’s seat: memory buttons.

The driver seat and outside mirror settings can be saved and opened using the memory buttons.

Storing the driver's seat and outside mirror settings for driving forward

1. Set the electronic parking brake.

2. Shift the transmission to neutral.

3. Switch the ignition on.

4. Adjust the driver's seat and outside mirror.

5. Press and hold the

button ﬁg. 75 for longer than one second.

6. Press the desired memory button ﬁg. 75 within approximately 10 seconds.

A chime will conﬁrm that the settings were saved.

Storing the front passenger's outside mirror settings for driving in reverse

1. Set the electronic parking brake.

2. Shift the transmission to neutral.

3. Switch the ignition on.

4. Press the desired memory button ﬁg. 75.

5. Select the reverse gear.

6. Adjust the front passenger's outside mirror so that the edge of the curb can be seen clearly, for example.

The selected mirror position will be stored automatically and assigned to the vehicle key that was used to unlock the

vehicle.

Opening the driver seat and outside mirror settings

1. When the vehicle is stationary, the ignition is switched off, and a door is open, press the respective memory button brieﬂy.

After approximately ten minutes, the stored positions can no longer be adjusted automatically. The adjustment process wi

be canceled if one of the memory buttons is pressed again.

Or: When the ignition is switched on or the door is closed, press and hold the respective memory button until the saved

positions are reached.

The front passenger's outside mirror automatically leaves the position stored for driving in reverse once you begin driving

131

forward at speeds of at least approx. 15 km/h (approx. 10 mph) or when you turn the knob for the outside mirrors from the

R position to another position.

If you open the driver door more than approximately ten minutes after the vehicle is unlocked, the driver seat and the

outside mirrors will not be adjusted automatically.

WARNING

Improper use of seat functions can cause injuries.

Before beginning a journey always adjust to the correct seat position and maintain this throughout the journey. This

also applies to all passengers.

Set the memory function only with the vehicle stationary.

Always keep your hands, ﬁngers, feet and other parts of your body clear of the area in which the seats operate and

move during adjustment.

132

Seat functions for Your Volkswagen Jetta 4 Door Seventh Generation (2019-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals