Get Parking Guide for Volkswagen Multivan SUV Sixth Generation (2015-2024)

Parking the vehicle

WARNING

The vehicle may roll away if you leave and park the vehicle incorrectly. This can cause accidents and serious injuries.

● When parking, observe the specified sequence.

● Make sure that the handbrake is applied securely.

● Never remove the vehicle key from the ignition if the vehicle is in motion. This could cause the steering lock to

engage suddenly. You will no longer be able to steer the vehicle.

1. Stop the vehicle on a suitable surface→ , →

.

2. Depress and hold the brake pedal until the engine has stopped.

On vehicles with a manual gearbox, eitherfully depress or disengage the clutch.

3. If the vehicle has an automatic gearbox, move the selector lever to position .

4. Apply the handbrake firmly.

5. On uphill and downhill slopes, turn the steering wheel so that the vehicle will roll against the kerb if it starts to

move.

6. Stop the engine and switch off the ignition.

7. Release the brake.

8. Turn the steering wheel slightly if necessary to engage the steering lock.

9. With a manual gearbox, select first gear for flat ground and uphill gradients, or reverse gear for downhill

gradients, and then release the clutch.

10. Get out of the vehicle and ensure that all occupants, in particular children, leave the vehicle→ . Watch out for

other road users!

11. Take all vehicle keys with you and lock the vehicle.

WARNING

If children, people requiring assistance or animals are left unattended in the vehicle, there is the danger of accidents

and serious injuries.

● Never leave children, people requiring assistance or animals in the vehicle unattended. They could release the

handbrake, move the selector lever or gearshift lever and thus set the vehicle in motion.

● Never leave children, people requiring assistance or animals in the vehicle. They could become trapped in the

vehicle in an emergency and may not be able to get themselves to safety. Temperatures inside a locked vehicle

can reach extremes of heat or cold, according to season. This can cause serious injuries and illness or fatalities,

especially in the case of small children.

● Always take all vehicle keys with you every time you leave the vehicle. The engine can be started and electrical

equipment such as the window controls can be operated. This can cause serious injury.

WARNING

The components of the exhaust system become very hot. This can cause fires and serious injuries.

● Never park the vehicle where parts of the exhaust system can come into contact with inflammable material

underneath the vehicle, such as undergrowth, leaves, dry grass, spilt fuel, oil etc.

NOTICE

The vehicle may become damaged if you park and leave the vehicle incorrectly.

● In order to prevent unwanted vehicle movements when parking the vehicle, always pull the handbrake up as far

as it will go and check that it is working properly.

● Objects that protrude from the ground can damage the bumper and other components when parking the vehicle.

Always take care when driving into parking spaces with high kerbs or fixed boundaries. Stop before the wheels

257

touch the fixed boundaries or kerbs.

● Low-lying vehicle components such as the bumper, spoiler and parts of the running gear, engine or exhaust

system could be damaged. Take care when driving over dips in the road, driveways, ramps, kerbs and other

objects.

NOTICE

If the ground is uneven, sandy or muddy, this may mean that the vehicle cannot be parked safely and may be

damaged.

● Always park the vehicle on a firm, level surface.

Please adhere to relevant legislation when stopping and parking your

vehicle.

Handbrake

Fig. 1 Between the front seats: handbrake.

Applying the handbrake

Depending on the vehicle load or trailer load, pull up the handbrake lever with force and latch it. The maximum effect

of the brake is achieved when the handbrake lever is pulled up as far as it will go.

Always check whether the maximum effect of the handbrake is reached.

1. Depress and hold the brake pedal.

2. Pull the handbrake lever up firmly with the lock button→ Fig. 1 pressed in.

3. Remove your foot gradually from the brake pedal and be ready to apply the brake.

4. If the vehicle still moves, pull up the handbrake more and repeat the procedure.

When the ignition is switched on, the indicator lamp in the instrument cluster lights up red→

.

Releasing the handbrake

1. Pull the handbrake lever up slightly and press the lock button→ Fig. 1.

2. Guide the handbrake lever down whilst the lock button is pressed.

WARNING

Incorrect use of the handbrake can cause accidents and serious injuries.

● Always apply the handbrake firmly when you park the vehicle. The red indicator lamp lights up as soon as the

handbrake is applied lightly and does not hold the vehicle securely.

● Never use the handbrake to brake the vehicle, except in an emergency. The braking distance is considerably

258

longer as only the rear wheels are braked in some cases. Always use the foot brake.

● Never drive the vehicle with the handbrake lightly applied. This can overheat the brakes and adversely affect the

brake system. It can also cause premature wear to the rear brake pads.

● Never press the accelerator if a drive position or gear has been selected and the engine is running while the

handbrake is applied. The vehicle could move even if the handbrake is applied.

WARNING

A handbrake that is not pulled up sufficiently may lead to undesirable vehicle movements and cause accidents or

severe injuries.

● Always pull up the handbrake as far as it will go and then take your foot off the brake pedal in a controlled

manner. If the vehicle or vehicle and trailer still roll away, apply the handbrake more firmly.

● Do not rely only on the braking effect of the handbrake. In vehicles with an automatic gearbox, move the selector

lever to the position. In vehicles with a manual gearbox, switch off the engine and select first gear. This is

particularly applicable at uphill or downhill gradients.

NOTICE

Failure to apply the handbrake sufficiently may lead to unwanted vehicle movements and cause damage to the

vehicle.

● Always pull up the handbrake as far as it will go and then take your foot off the brake pedal in a controlled

manner. If the vehicle or vehicle and trailer still roll away, apply the handbrake more firmly.

● Do not rely only on the braking effect of the handbrake. In vehicles with an automatic gearbox, move the selector

lever to the position. In vehicles with a manual gearbox, switch off the engine and select first gear. This is

particularly applicable at uphill or downhill gradients.

NOTICE

The vehicle may move a few centimetres forwards or backwards if the handbrake is not applied fully when the

vehicle is stationary and the brake pedal is released when the selector lever is in position .

An acoustic warning is given if the vehicle is driven faster than approximately 6 km/h(4 mph) with the

handbrake applied.

Safety information

WARNING

The intelligent technology of the parking systems cannot overcome the laws of physics, and functions only within

the system limits. Never let the extra convenience afforded by the parking systems tempt you into taking any risks

when driving. The parking systems cannot replace the full concentration of the driver.

● Ensure that your speed and driving style are always appropriate for the current visibility, weather and road/traffic

conditions.

● Keep looking in the direction in which you are parking and at the relevant area surrounding the vehicle. Pay

special attention to small children, animals and objects.

● Please note that the parking system may not be able to react if the obstacle is approached too fast and will then

not issue a warning.

● Do not allow the parking system displays to distract you from the traffic around you.

WARNING

Camera lenses enlarge and distort the field of view. Using images from the camera to estimate the distance from

persons or obstacles can be inaccurate and may cause accidents and serious injuries.

● Do not rely on the camera image.

NOTICE

Observe a distance of 50 cm(20 inches) from walls and buildings in parking spaces without kerbs in order to avoid

damage to the vehicle.

259

Limits of sensors and cameras

There are various sensors and cameras on the vehicle which detect and monitor the area around the vehicle by means

of ultrasound, radar waves and optical systems. The various parking systems use different combinations of the

sensors. Common to all sensors is the fact that they are subject to technical and physical limits →

.

—The sensors or cameras may not detect some objects, e.g. trailer drawbars, thin bars, fences, posts, trees, very low

or high obstacles, and boot lids that are open or being opened.

—The detection ranges of the sensors have blind spots in which obstacles and people are not registered.

—In some cases, dirt or ice and water on the sensors and cameras could be registered as an obstacle or impair

detection of objects. The sensor visibility may be impaired by dirt and snow or also residue from cleaning agents or

coatings.

—External sources of sound and certain surfaces on objects and clothing may influence the sensors’ signals. In

certain circumstances, the systems will be unable to detect or properly detect people and objects.

—It may be difficult or impossible to see objects such as narrow posts or railings on the screen because of its low

resolution or poor light conditions.

—The cameras show only two-dimensional images on the screen. The lack of depth of field means that potholes and

protruding objects on the ground may only be detected with difficulty, or may not be detected at all.

Practise using the parking systems in a traffic-calmed area or car park to familiarise yourself with the systems

and their functions.

Prerequisites

General information

The following prerequisites must be met so that the sensors and cameras are best able to detect the surroundings of

the vehicle and display this information on the Infotainment system:

✓ Doors and tailgate are closed.

✓ Exterior mirrors are not folded in.

✓ The sensors or cameras are not covered by add-on parts or trim frames for number plates.

✓ The surrounding area has a flat surface.

✓ Vehicle does not have a heavy load at the rear or on one side.

✓ Engine running.

✓ Brake support systems are switched on (→ Brake support systems).

The parking function and the acoustic warnings will be deactivated if other functions are operated on the

Infotainment system during a parking operation.

Finding a suitable parking space

Park Assist has system-related limitations. For example, Park Assist cannot help you to park the vehicle or drive out of

parking spaces if the vehicle is on a tight bend.

To ensure that a suitable parking space can be displayed and detected correctly, the following prerequisites must be

met:

✓ The length and width of the parking space must be larger than the vehicle dimensions and offer sufficient space

for manoeuvring.

✓ Distance when driving past the parking space: between 0.5 and 2 metres.

✓ Speed when driving past the parking space: maximum 40 km/h(25 mph).

260

✓ Speed when parking: maximum 7 km/h (4 mph). Automatic braking intervention can occur→

.

The parking manoeuvre can be continued after the automatic brake intervention.

Automatic brake intervention occurs a maximum of once per move. A parking manoeuvre will be terminated if a

speed of approximately 7 km/h (4 mph) is exceeded.

WARNING

Do not let Park Assist tempt you to take any risks while driving – this can cause accidents. The system is not a

substitute for the full concentration of the driver.

● Park Assist has system-related limitations. In some situations the automatic brake intervention can only work in a

limited way or not at all.

● Always be prepared to brake the vehicle yourself at any time.

● The automatic braking intervention is ended after approximately 1.5 seconds. Depress the brake pedal of the

vehicle yourself following the automatic braking intervention.

Automatic braking intervention

The automatic braking intervention of a parking system is designed to reduce the possible damage due to a collision

if an obstacle is detected during the parking manoeuvre.

Depending on the equipment, the vehicle may have parking systems with a manoeuvring or emergency braking

function →

.

WARNING

Do not let the automatic braking intervention triggered of the parking systems tempt you to take any risks while

driving. In some situations the automatic brake intervention can only work in a limited way or not at all. Collisions

with obstacles can cause injuries to persons and vehicle damage. The system is not a substitute for the full

concentration of the driver.

● Always pay due attention and do not rely exclusively on the parking systems.

● Always be prepared to brake and steer the vehicle yourself.

● Do not take any safety risks.

● React appropriately to the warnings and driving recommendations of the parking systems.

● The automatic braking intervention by the active Park Assist is terminated after approximately 1.5 seconds.

Depress the brake pedal of the vehicle yourself following the automatic braking intervention.

Prerequisites

✓ The vehicle does not exceed a maximum speed of around 10 km/h(6 mph) when manoeuvring.

✓ A parking system was switched on.

✓ An obstacle is detected by the system.

The automatic braking intervention does not take place if Park Distance Control has been activated automatically

when driving forwards .

What happens when an automatic braking intervention takes place?

If an obstacle is detected, the vehicle brakes to a complete stop and is held for about 1.5 seconds.

1. Hold the vehicle with the foot brake after the automatic braking intervention.

2. Check the surrounding area.

A text message may also be displayed on the instrument cluster, depending on the vehicle equipment.

261

Switching off

The automatic braking intervention function is deactivated as soon as a parking system is deactivated or when the

function has made a control intervention.

1. Tap the

function button on the Infotainment system screen to manually switch off manoeuvre braking.

Switching on

The automatic braking intervention function is active as soon as a parking system has been activated.

1. Tap the function button on the Infotainment system screen to switch on manoeuvre braking manually.

Driving with a trailer

The automatic braking intervention function at the rear of the vehicle when reversing is deactivated if a trailer is

electrically connected to the factory-fitted towing bracket.

The parking system must be manually deactivated for trailer towing if a non-factory-fitted towing bracket is used.

Switch off the parking system if automatic braking intervention takes place too frequently, e.g. when driving

on offroad terrain.

If the Park Distance Control’s manoeuvre braking function has intervened, the function is inactive for

five metres in the same direction of travel or is operational again after a change in the direction of travel.

After emergency braking of the park assist steering, the parking manoeuvre is

terminated.

After the Rear Traffic Alert has performed emergency braking, another automatic braking intervention may

only take place after 10 seconds.

Troubleshooting

The parking system is not responding as expected

This could have various causes:

—The prerequisites for system operation are not met (→ Parking systems).

—The sensors or the camera are dirty or iced-up (→ Vehicle care, exterior).

—The camera lens is not clean and the camera image is unclear (→ Vehicle care, exterior).

—The ultrasound signal is subject to interference from external noise sources, e.g. pneumatic drill or cobblestones.

—Only the scanned area to the front of the vehicle is shown on the Infotainment system display in vehicles with a

factory-fitted towing bracket and a trailer with an electrical connection to the vehicle.

—The vehicle is damaged in the area around the sensors or the camera, e.g. caused by parking collisions.

—The detection range of the sensors or camera is blocked by add-on parts, e.g. bicycle carriers.

—Changes have been made to the paintwork or structural modifications have been made in the area of the sensors or

the camera, e.g. on the vehicle front end or the running gear.

Fault displays

1. Observe the text messages in the instrument cluster display and the Infotainment system.

NOTICE

262

Go to a suitably qualified workshop as soon as possible in the event of a parking system fault.

No sensor or camera view, or the parking system has been switched off

The sensor area is switched off permanently if a sensor fails. The affected sensor area can be displayed by the

symbol and a grey image segment in the Infotainment system. The parking system is switched off completely if

necessary.

If there is a fault in the Park Distance Control, a signal tone will sound for several seconds when it is switched on. A

text notification may also be shown on the instrument cluster display.

1. Check whether one of the listed causes is present.

2. Switch the system on again once you have rectified the source of the fault.

3. If the problem persists, go to a correspondingly qualified workshop.

Park Assist is active and the vehicle brakes

In some countries, Park Assist can assist the driver with an automatic braking intervention in certain situations.

Depending on the vehicle equipment and certain conditions, e.g. weather, load or inclination of the vehicle, Park

Assist can automatically brake the vehicle before an obstacle. Following this intervention, the driver must depress the

brake pedal.

The parking manoeuvre is ended if an automatic braking intervention occurs.

Park Assist is active and the parking manoeuvre is automatically cancelled

Park Assist automatically cancels a parking procedure if one of the following criteria is met:

—The

button is pressed.

—The driver intervenes using the steering wheel.

—The driver door is opened.

—The time limit or number of manoeuvres for parking are exceeded.

—The TCS is switched off or is taking corrective action.

—There is a fault in the system.

Start the parking procedure again (→ Driving into a parking space).

Introduction

The Park Distance Control assists the driver when manoeuvring and parking.

Fig. 1 In the Infotainment system: obstacle detection for

Park Distance Control (illustration).

263

How the system works

Park Distance Control detects the distance from an obstacle by means of sensors in the rear and front areas of the

vehicle.

Park Distance Control warns about an obstacle by means of colour segments on the Infotainment system screen and

acoustic signals → Fig. 1. The closer the vehicle drives towards an obstacle, the closer the segment will move

towards the vehicle as shown on the display →

.

Acoustic signals

An intermittent signal tone is given if a sufficiently short distance between the vehicle and an obstacle is detected.

The shorter the distance, the shorter the intervals. The acoustic signal will sound continuously if the obstacle is very

close. Do not drive on!

WARNING

The intelligent technology used in the parking systems cannot overcome the laws of physics, and functions only

within the system limits. The parking system is not a substitute for the full concentration of the driver. If this is not

observed, this can result in accidents, serious injuries and also damage to the vehicle.

● Always pay due attention and do not rely exclusively on the parking systems.

NOTICE

The collision area has been reached at the latest when the penultimate segment is displayed.Do not drive on!

NOTICE

The vehicle must be moved a few metres forwards or backwards in order to scan and display the side areas in full. An

obstacle entering these areas from the outside will not be displayed.

Displays

Red image segment: Obstacle close to the vehicle.Vehicle is at risk. Brake.

Yellow image segment: Obstacle in the vehicle’s path.Vehicle is at risk. Adjust the steering wheel angle.

Grey image segment: Obstacle outside the path of the vehicle or faulty sensor area.

Switch manoeuvre braking off or on(depending on equipment).

System fault in the monitored area(depending on equipment level). The colour may vary.

Switch to rear view camera system.

Mute signal tones.

NOTICE

Visual and acoustic warnings are given only for obstacles in the vehicle path.

264

Switching Park Distance Control on and off

Fig. 1 In the centre console: button for switching the Park

Distance Control on or off (with some equipment levels).

Switching on

1. Press the

button → Fig. 1.

Park Distance Control is switched on automatically when reverse gear is engaged or if the vehicle rolls backwards.

Switching off

1. Press the

button.

Park Distance Control is switched off automatically when the vehicle is driven forwards at a speed of more than

15 km/h (9 mph).

Or: the selector lever is moved to position .

Automatic activation when driving forwards (depending on vehicle equipment)

Park Distance Control switches itself on automatically if the vehicle approaches an obstacle in front of the vehicle

when driving forwards at a speed of less than 15 km/h (9 mph). Automatic activation can be switched on and off in

the Infotainment system (→ Analogue instrument cluster).

Automatic activation takes place only once. Renewed automatic activation is possible under the following conditions:

1. Press the

button.

2. Switch the ignition off and then back on again.

265

Switching Park Distance Control on and off (sensors only at rear)

Switching on Park Distance Control

The Park Distance Control switches on automatically if the reverse gear is engaged.

Switching off Park Distance Control

Park Distance Control is switched off automatically when the vehicle is driven forwards at a speed of more than

15 km/h (9 mph).

Or: the selector lever is moved to position .

266

Introduction

The rear view camera system in the rear of the vehicle makes it easier for the driver to see behind the vehicle and

provides support for parking manoeuvres.

The rear view camera system shows the area behind the vehicle on the Infotainment system screen. Depending on

the operating mode and equipment level, orientation lines aid the view to the rear →

.

Rear view camera system with parking modes

Depending on equipment, the following views are available for the rear view camera system:

Perpendicular parking:

orientation lines assist reverse parking at a right angle to the road.

Parallel parking:

orientation lines and boxes assist reverse parking parallel to the road.

Crossing traffic:

shows the area behind and beside the vehicle with a wide angle.

Trailer support:

shows the area immediately behind the vehicle with a high zoom factor and orientation lines

WARNING

The intelligent technology used in the parking systems cannot overcome the laws of physics, and functions only

within the system limits. The parking system is not a substitute for the full concentration of the driver. If this is not

observed, this can result in accidents, serious injuries and also damage to the vehicle.

● Always pay due attention and do not rely exclusively on the parking systems.

You should practise parking with the rear view camera system in a traffic-calmed area or car park with good

visibility and weather conditions, so that you can familiarise yourself with the system, orientation lines and

guiding functions in a safer environment.

267

Switching the rear view camera system on and off

Switching on the rear view camera system

1. Select reverse gear.

Or: Press the

button.

Switching off the rear view camera system

—Rear view camera system without parking modes:The rear view camera system switches off when the reverse gear

is disengaged.

—Rear view camera system with parking modes:The rear view camera system is switched off when the vehicle is

driven forwards at a speed of more than 15 km/h (9 mph).

268

Driving into a parking space (rear view camera system with parking mode

selection)

Displays

Switch to Park Distance Control.

Switch to “Perpendicular parking”.

Switch to “Parallel parking”.

Turn the steering wheel(parallel parking mode).

Stop the vehicle(parallel parking mode).

Switch to “Crossing traffic”.

Switch to “Trailer support”.

Red line: boundary or safety clearance. The horizontal red line ends approximately 0.4 metres behind or in front

of the vehicle on the road.

Red frame: outline of the vehicle(parallel parking).

Yellow lines: the vehicle's path depending on the steering angle.

Yellow auxiliary box: front and rear boundaries of the parking space(parallel parking).

Green lines: boundaries.

Green frame: outline of the vehicle(parallel parking).

Parking perpendicular to the road

Fig. 1 Infotainment system screen display: Choose parking

space.

269

Fig. 2 Infotainment system screen display: drive towards

the selected parking space.

Fig. 3 Infotainment system screen display: Align the

vehicle in the parking space.

1

Road.

2

Selected parking space.

3

Lateral boundaries of selected parking space.

4

Rear limit of the parking space.

Driving into a parking space

1. Press the button or the

function button before driving past the selected parking space.

2. Tap the

function button in the Infotainment system.

2

3. Position the vehicle in front of the parking space→ Fig. 1

4. Select reverse gear.

.

2

5. Reverse slowly and steer the vehicle so that the yellow lines are aligned with the selected parking space

3

.

The green and yellow lines must be aligned with the side boundary lines → Fig. 2

.

4

6. Stop when the red line reaches the rear boundary→ Fig. 3

.

270

The system displays the orientation lines irrespective of the area surrounding the vehicle. There is no automatic

obstacle detection. Drivers must judge for themselves whether the vehicle will fit into the parking space.

Parking mode: Trailer support

Fig. 4 Infotainment system screen display: Trailer support.

In vehicles with a factory-fitted towing bracket, the trailer support function can be used when approaching a trailer

drawbar.

1. Tap the

function button to select the parking mode.

The rear view camera system shows the vehicle’s towing bracket in the lower part of the image. Coloured guiding

lines help with the manoeuvring process → Fig. 4:

Green lines: Distance to towing bracket.

Yellow line: Pre-calculated direction of the towing bracket depending on the angle of the steering wheel.

Parking parallel to the road

Fig. 5 Infotainment system screen display: Choosing a

parking space (illustration).

271

Fig. 6 Infotainment system screen display: drive towards

the selected parking space (illustration).

Fig. 7 Infotainment system screen display: Aligning the

vehicle in the parking space (illustration).

1

Road.

2

Obstacle or auxiliary box.

3

Lateral boundaries of selected parking space.

4

Obstacle or auxiliary box.

Red line: boundary or safety clearance.

Yellow lines: the vehicle's path depending on the steering angle.

Green lines boundary lines.

Parking using the rear view camera system

1. Press the button or the

function button before driving past the selected parking space.

2. Tap the

function button in the Infotainment system.

3. Operate the turn signal for the relevant side of the road.

4. Position the vehicle parallel to and around one metre away from the parking space. The yellow auxiliary boxes

2

4

must cover the obstacles → Fig. 6

and

. The area in between must be free of obstacles.

5. Select reverse gear. A red frame shows the target position of your vehicle→ Fig. 5.

272

6. Turn the steering wheel so that the red frame moves between the auxiliary boxes and turns green→ Fig. 5.

Leave the steering wheel in this position while reversing.

7. If a change has to be made to the steering wheel angle, one of the yellow lateral lines will turn red. The steering

wheel symbol shows the driver when the steering wheel angle has to be changed.

8. Reverse slowly until the stop sign is displayed or the green line is aligned with the side limit of the parking

space → Fig. 7. An arrow→ Fig. 6 indicates the remaining distance behind the vehicle, based on the number of

segments shown in the arrow.

9. Stop the vehicle. Steer in the opposite direction until the steering angle is reached and the direction arrow is no

longer displayed.

10. Continue reversing until the stop symbol is displayed or until the red line reaches the rear limit.

Introduction

Park Assist shows parking spaces that are suitable for parking and assists the driver when driving into and out of

parking spaces.

How the system works

Park Assist is an extension of Park Distance Control (→ Park Distance Control).

Park Assist steers the vehicle automatically. The driver must control the accelerator, gear changes and brake→

Observe the text message in the instrument cluster display.

.

The

button for the rear window heating is located in the centre console.

WARNING

The intelligent technology used in the parking systems cannot overcome the laws of physics, and functions only

within the system limits. If this is not observed, this can result in accidents, serious injuries and also damage to the

vehicle.

● Pay careful attention to the parking procedure and the traffic around you. Keep looking in the direction in which

you are parking.

● Use the foot brake to slow the vehicle in a hazardous situation.

WARNING

Fast rotational steering wheel movements can cause serious injury.

● During the manoeuvring operation, do not grasp the steering wheel until prompted to do so by the system.

● If a dangerous situation occurs, take control of the steering.

NOTICE

Park Assist uses parked vehicles, the kerb and other objects as guidance. Please ensure sure that low-lying vehicle

parts such as tyres and wheel rims are not damaged when parking.

● If necessary, operate the brake pedal and finish the parking manoeuvre.

Any equipment that has been retrofitted to the vehicle, e.g. bicycle carriers, can prevent Park Assist from

functioning properly and may cause damage.

Park Assist cannot be activated when an electrically connected trailer has been detected by the

vehicle.

Park Assist can be activated retroactively. If a suitable parking space was driven past before, it is

displayed.

273

Park Assist cannot be activated when a sliding door or the boot lid are

open.

When carrying out parking manoeuvres, the vehicle may be braked if the driver accelerates too

strongly.

Looking for a parking space

Fig. 1 On the display of the instrument cluster: Reversing

into a parallel parking space.

Fig. 2 On the display of the instrument cluster: Reversing

into a perpendicular parking space.

Fig. 3 On the display of the instrument cluster: Driving

forwards into a perpendicular parking space.

Park Assist has three parking modes→ Fig. 1, Fig. 2 and Fig. 3 (illustration).

1. Press the

button.

The indicator lamp lights up yellow and the parking function is active.

2. Observing the traffic around you, drive slowly past a row of parked vehicles.

Park Assist will automatically search for a suitable parking space on the front passenger side.

A parking mode is displayed when a parking space is detected→ Fig. 1, Fig. 2 or Fig. 3.

1. Press the

button to choose successively from several displayed parking spaces.

2. If you wish to park perpendicularly in forward direction, select parking mode “Forward perpendicular

parking” → Fig. 3 by pressing the button.

3. If you want Park Assist to look for a parking space on the opposite side of the road, operate the turn signal for

274

the side in question.

Park Assist can be activated retroactively. If a suitable parking space was driven past before, it is

displayed.

Driving into a parking space

Fig. 1 On the display of the instrument cluster: Choosing a

parking space (illustration).

Fig. 2 On the display of the instrument cluster: Position for

parking (illustration).

Fig. 3 On the display of the instrument cluster: Aligning

the vehicle in the parking space (illustration).

1

Prompt to drive forward

2

Your vehicle

3

Parked vehicle or obstacle.

4

Parking space detected

275

5

6

7

Instruction to put the vehicle into reverse gear.

Prompt to press brake pedal.

Progress bar: symbol to show relative distance left to travel.

1. Stop the vehicle in front of or behind the parking space.

5

2. Observe the prompt to park in the instrument cluster display→ Fig. 2

.

3. Select reverse gear when a reverse arrows appears in the instrument cluster.

4. Let go of the steering wheel.

5. Text message Steering intervention active!. Check area around veh.. Observe the text message on the

instrument cluster display.

6. Accelerate carefully.

7. Brake when an acoustic signal sounds, the display lights up or a text message appears on the instrument

cluster display.

8. Continue the parking procedure until a text message on the instrument cluster display and possibly an acoustic

signal indicate that the parking procedure has been completed.

9. Always wait until Park Assist has completed the turning movements of the steering wheel at the end of each

parking manoeuvre in order to achieve an optimum parking result.

10. Switch off the engine and stop the vehicle (→ Parking).

Driving out of a parking space

Fig. 1 On the display of the instrument cluster: driving out

of a parking space parallel to the road.

1

Stationary vehicle.

2

Your vehicle with reverse gear engaged.

3

Arrow indicating the direction of travel for the next move.

276

4

Progress bar: symbol to show relative distance left to travel.

Park Assist can drive out of parallel parking spaces if the prerequisites for this are met (→ Parking systems).

1. Press the button.

2. Press the turn signal lever for the side of the street where the parking space is that you want to get out of.

3. Select reverse gear.

4. Release the steering wheel when the following message is shown:Steering intervention active! Please monitor

area around vehicle.

5. Accelerate carefully.

6. Brake when an acoustic signal sounds, the display lights up, or until the prompt to drive forward appears on

the instrument cluster display.

7. Depress the brake pedal until Park Assist has finished steering or until the display on the instrument cluster

goes out.

8. Repeat reversing and driving forwards until a corresponding message is displayed on the instrument cluster. A

signal tone may also sound.

9. Take over steering with the steering angle turned by Park Assist.

10. Drive out of the parking space when the traffic allows.

Introduction

Trailer Assist helps the driver when reversing or manoeuvring the vehicle when towing a trailer.

The trailer manoeuvring system steers a trailer and is operated by pushing and pulling the switch for setting the

exterior mirror. The driver must control the accelerator, gear changes and brake!

System limits

Please note the following to ensure the system works correctly:

—The camera is clean and free from snow and ice.

—The camera is free from stickers and other objects.

—The drawbar is not covered.

—The boot lid is closed.

NOTICE

Risk of vehicle damage. Trailer Assist is not oriented to the vehicle environment and does not detect any obstacles

in the surrounding area.

● Check whether there is sufficient space to manoeuvre the trailer.

● Observe the movement of the trailer and cancel the manoeuvre if necessary in order to avoid damage. On rare

occasions the trailer may behave differently, even when Trailer Assist is operated correctly.

● Do not rely solely on the instrument cluster displays.

Volkswagen Commercial Vehicles recommends that drivers practise using the trailer manoeuvring system in a

traffic-calmed area or car park to familiarise themselves with the system and its functions.

If there is no driver interaction within approximately three minutes, the manoeuvre is terminated and Trailer

Assist is ended.

277

Prerequisites

Determining the drawbar length

The drawbar length must be re-determined every time the trailer is changed. If the same trailer is always used, the

drawbar length must only be determined once.

1. Perform turning and cornering manoeuvres with the trailer. The more varied the turning and cornering

manoeuvres, the more manoeuvring options the trailer manoeuvring system will detect for the trailer.

There is a maximum of four limit positions for the angle display: approx. 30°, 45°, 60° and 75°.

Fulfilling requirements

The following prerequisites must be met for the trailer manoeuvring system to function:

✓ A trailer with a maximum of two rigid axles is attached and electrically connected.

✓ Driver door and boot lid are closed.

✓ Engine running.

✓ Vehicle is stationary.

✓ ESC is switched on.

✓ Exterior mirrors are not folded in.

For technical reasons, the trailer manoeuvring system cannot always detect trailers with

LED

tail light clusters correctly.

278

Manoeuvring the vehicle and trailer

Fig. 1 On the display of the instrument cluster: adjusting

the angle of the trailer using the rotary knob for the

exterior mirrors.

Fig. 2 On the display of the instrument cluster: Adjusting

the direction of travel of the trailer.

1

Rotary knob for adjusting the exterior mirror position.

2

Align the trailer to the left.

3

Align the trailer to the right.

4

Reverse the vehicle and move the trailer towards the target position.

5

Current trailer position.

6

Target trailer position.

7

Zero position on the angle display.

279

Check the requirements before using the trailer manoeuvring system (→ Trailer manoeuvring system):

Manoeuvring

1. Select reverse gear.

2. Press the

3. Release the steering wheel→

4. Tilt the rotary knob until the desired direction is reached→ Fig. 1

button.

.

1

. A diagram showing the current position

5

of the trailer appears on the instrument cluster display for orientation purposes → Fig. 2

.

5. Accelerate slowly and reverse the vehicle. Keep an eye on the area around the vehicle.

1

6. Correct the angle with the rotary knob if necessary→ Fig. 1

.

2

3

7. Push the rotary knob to the left

4

or right

to select the direction of travel.

8. Pull the rotary knob back

.

9. Reverse and drive forwards until the required position is reached.

The manoeuvring operation has been completed when a corresponding message is displayed on the instrument

cluster. A signal tone may also sound.

Automatic braking intervention

The driver is responsible for braking in time→

.

An automatic braking intervention may occur and the function may be cancelled in the following situations:

—Speed of approximately 6–8 km/h (3–5 mph) is exceeded.

—Steering interventions by driver.

—Diver door is open.

—The

button is pressed.

WARNING

Risk of injury. Fast rotational steering wheel movements can cause serious injury.

● When manoeuvring, do not reach for the steering wheel until prompted to do so by the system.

● Exception: If a dangerous situation occurs, intervene and take over the steering.

WARNING

Risk of injury. Do not let the automatic braking intervention tempt you to take any risks while driving, as this can

cause accidents. The system is not a substitute for the full concentration of the driver.

● Trailer Assist has system-related limitations. In some situations the automatic brake intervention can only work in

a limited way or not at all.

● If a dangerous situation occurs, intervene by applying the brakes yourself.

● The automatic braking intervention is ended after approximately 1.5 seconds at vehicle standstill.

● Depress the brake pedal of the vehicle yourself following the automatic braking intervention.

The exterior mirrors cannot be adjusted while Trailer Assist is

active.

Rear Traffic Alert (Rear Cross Traffic Alert)

280

Fig. 1 Illustration of Rear Traffic Alert: Monitored area

around the vehicle leaving the parking space.

Fig. 2 On the Infotainment system screen: Rear Traffic

Alert display.

Rear Traffic Alert monitors crossing traffic when reversing out of a parking space or manoeuvring.

Also observe the information and warnings that apply to all Park Assist functions (→ Parking systems).

Switching on and off

1. Via the Assist systems menu in the instrument cluster .

Or: In the vehicle settings in the Infotainment system (→ Vehicle settings menu).

2. Switch Rear Traffic Alert on or off.

This setting can be saved in the user accounts of the personalisation function and can therefore change

automatically when the user account is changed.

How the system works

Rear Traffic Alert uses radar sensors in the rear bumper.

The system detects approaching or moving objects at the rear and to the sides of the vehicle→ Fig. 1 and warns the

driver when approaching an obstacle →

.

If the vehicle encounters an obstacle, the obstacle area is displayed in colour on the Infotainment system→ Fig. 2,

and an acoustic warning may also sound.

281

Parking for Your Volkswagen Multivan SUV Sixth Generation (2015-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals