Get Adjusting the seating position -> Removing and reinstalling head restraints Guide for Volkswagen Passat SUV Sixth Generation (2005-2010)

Removing and reinstalling head restraints

Fig. 62 Removing the front head restraints.

Fig. 63 Removing the rear head restraints.

ꢀPlease first read and note the introductory information and heed the WARNINGS

All seats are equipped with head restraints. The rear center head restraint is designed only for the

center seat on the rear bench. Therefore, only install the center head restraint in the center position.

Removing the front head restraints

ꢀ

Sit in the back seat behind the head restraint you want to remove. Pull the head restraint all the

way up ⇒ꢀ in Adjusting front and rear head restraints. Recline the backrest with the head restraint

so that there is enough overhead clearance to remove it.

Slide a flat object, such as a plastic credit card, underneath the right side of the cap on the right-

hand seat guide rod ⇒ꢀfig. 62 (1) to unlock the head restraint.

Push the flat object (plastic card) in against the guide rod to depress a release button located

under the cap (not visible).

Use one hand to hold the release button in with the flat object. With your other hand, lift the same

ꢀ

guide rod slightly to expose a notch in the rod at the bottom (can be seen and felt with fingers). The

right-hand guide rod is now released.

ꢀ

To release the left-hand guide rod, press button (2) in (towards guide rod) and hold.

Pull the head restraint out completely while holding button (2).

Installing the front head restraints

Position head restraint properly over the head restraint guides of the respective seat backrest and

insert the head restraint into the guides.

ꢀ

Push the head restraint down while pressing button (2).

Adjust the head restraint according to the occupant's size, Adjusting front and rear head restraints.

Removing the rear head restraint

ꢀ

Unlock the backrest of the rear seat bench and fold it forward, Luggage compartment.

Pull the head restraint all the way up ⇒ꢀ

If necessary, press the flat blade of the screwdriver from the vehicle tool kit into the slit of the trim

ꢀ

cap ⇒ꢀfig. 63 (1) in the direction of the arrow and hold it in this position.

ꢀ

At the same time press button (2) while a second person pulls out the head restraint completely.

ꢀ

Fold the backrest of the rear seat bench back so that it locks securely.

Reinstalling the rear head restraint

ꢀ

Unlock the backrest of the rear seat bench and fold it forward, Luggage compartment.

Position head restraint properly over the head restraint guides of the respective seat backrest and

insert the head restraint into the guides.

ꢀ

Push the head restraint down while pressing button (2).

Fold the backrest of the rear seat bench back so that it locks securely.

Adjust the head restraint according to the occupant's size, Adjusting front and rear head restraints.

WARNING

Driving without head restraints or with improperly adjusted head restraints increases the risk

of serious injuries in a collision.

ꢀ

Always drive with the head restraints in place and properly adjusted to help minimize the

risk of neck injury in crash.

Always reinstall head restraints as soon as possible so that vehicle occupants are

ꢀ

properly protected.

NOTICE

When removing or reinstalling the head restraint, take care that the head restraint does not

strike the headliner or other parts of the vehicle. The headliner or other parts of the vehicle

could otherwise be damaged.

Adjusting the seating position -> Removing and reinstalling head restraints for Your Volkswagen Passat SUV Sixth Generation (2005-2010)

Related Topics

Adjusting the seating position

Popular Owner Manuals

Latest Owner Manuals