Advertisement

Advertisement

Emergency closing and opening -> Emergency closing of the power sunroof for Your Volkswagen Passat SUV Sixth Generation (2005-2010)

Emergency closing of the power sunroof  
Fig. 200 In headliner: Removing cover.  
Fig. 201 Hexagonal head screw for closing the power sunroof.  
Please first read and note the introductory information and heed the WARNINGS  
The power sunroof has an overheating protection feature that can temporarily turn the electric motor  
off under certain circumstances. This can happen after, for example, overriding the motor too often  
when closing the power sunroof without the pinch protection.  
After the motor has cooled down enough, the overheating protection feature will let the motor work  
again and the power sunroof can be opened or closed with the rotary switch.  
Before you try to use emergency closing procedures to close the power sunroof, please wait several  
minutes to make sure that the motor has not been temporarily turned off by the overheating protection  
feature.  
However, if you have to perform an emergency closing, please do so in the following order:  
Remove the cover in direction of the arrow ⇒ꢀfig. 200.  
Insert a commercially available 1/6 in (4 mm) Allen wrench8 into the hexagonalal head screw  
⇒ꢀfig. 201 (1).  
Turn the wrench in order to close the power sunroof.  
Install the cover again.  
8
Not included with the vehicle tool kit.  
351  
Have the power sunroof checked by an authorized Volkswagen dealer or an authorized  
Volkswagen Service Facility. Emergency closing may cause the power sunroof and its pinch protection  
to malfunction.  
Emergency release for the selector lever lock  
Fig. 202 Removing the selector gate cover.  
Fig. 203 Releasing the selector lever lock.  
Please first read and note the introductory information and heed the WARNINGS  
If the power supply fails (due to a dead vehicle battery, for example) and the vehicle has to be pushed  
or towed, the emergency release must be used to move the selector lever to N (Neutral).  
The emergency release is located under the selector gate cover on the right side when viewed in the  
driving direction. You will need a tool like a screwdriver to release the selector lever lock.  
Preparations  
Set the parking brake. If the parking brake cannot be set firmly, you must find another way to  
prevent the vehicle from moving.  
Switch off the ignition.  
Removing the selector gate cover  
Pull upward on the cover around the selector lever sleeve ⇒ꢀfig. 202.