Advertisement

Advertisement

Mirrors for Your Volkswagen Passat SUV Sixth Generation (2005-2010)

Mirrors  
Introduction  
In this section you’ll find information about:  
Inside mirror  
Outside mirrors  
Outside mirrors  
For your driving safety, it is important that you properly adjust the outside mirrors and the inside mirror  
before you start driving ⇒ꢀ  
.
The outside mirrors and the inside mirror help you see and adapt your driving to traffic behind you.  
Remember that the inside and outside rearview mirrors will not show everything behind you. There  
can be blind spots. Blind spots can be significantly larger if the mirrors are not properly adjusted.  
More information:  
Exterior views  
Volkswagen Information System  
Adjusting the seating position  
Shifting gears  
Braking, stopping and parking  
WARNING  
Adjusting mirrors when the vehicle is moving can cause driver distraction, accidents, and  
serious personal injury.  
Always adjust the rearview mirrors when the vehicle is not moving.  
Always be aware of what is happening around the vehicle when changing lanes, passing,  
turning, or parking. Another vehicle, pedestrian, or object could be in your blind spot.  
Always make sure mirrors are properly adjusted and the view to the rear is not reduced by  
moisture, ice, snow, or other things.  
WARNING  
Auto-dimming mirrors contain an electrolyte fluid which can leak if the mirror glass is broken.  
Electrolyte fluid can irritate the skin, eyes, and respiratory system.  
Repeated or prolonged exposure to electrolyte fluid can irritate the respiratory system,  
especially among people with asthma or other respiratory conditions. Get fresh air  
immediately by leaving the vehicle or, if that is not possible, open windows and doors all the  
way.  
If electrolyte fluid gets into the eyes, flush them thoroughly with large amounts of clean  
water for at least 15 minutes; medical attention is recommended.  
If electrolyte fluid contacts skin, flush affected area with clean water for at least  
15 minutes and then wash affected area with soap and water; medical attention is  
recommended. Thoroughly wash affected clothing and shoes before reuse.  
If swallowed, and the person is conscious, rinse mouth with water for at least 15 minutes.  
Get medical attention immediately. Do not induce vomiting unless instructed to do so by a  
medical professional.  
NOTICE  
Broken glass in the auto-dimming mirrors can cause electrolyte fluid leakage. Liquid  
electrolyte leaked from a broken mirror glass will damage any plastic surfaces it comes in  
contact with. Clean up spilled electrolyte fluid immediately with clear water and a sponge.  
Inside mirror  
Fig. 108 Manually adjustable inside mirror.  
Fig. 109 Auto-dimming inside mirror.  
Please first read and note the introductory information and heed the WARNINGS  
Adjust the inside mirror to make sure that there is good visibility through the rear window.  
For example, visibility through the rear window could be impaired if there is a sunshade on the rear  
window or clothing on the luggage compartment cover, or if the rear window is covered with ice, snow,  
or dirt.  
Manually adjustable inside mirror  
Home position: Lever on the bottom edge of the mirror points forward.  
To adjust to non-glare visibility, move the lever so that it points backward ⇒ꢀfig. 108.  
Auto-dimming inside mirror  
Key to fig. 109:  
(1)  
(2)  
(3)  
Indicator light  
Switch  
Sensor for recognizing entry of light  
The auto-dimming feature can be switched on and off with the switch on the inside mirror (2). When  
auto-dimming is activated, the indicator light (1) is on.  
If the ignition is switched on, the sensor (3) automatically darkens the inside mirror depending on the  
amount of light shining into the vehicle from the rear.  
The auto-dimming feature is deactivated when you shift the transmission into reverse or switch on the  
interior lights or the reading light.  
Do not attach external navigation devices to the windshield or in the vicinity of the auto-dimming inside  
mirror ⇒ꢀ  
.
WARNING  
The illuminated display on an external navigation device can cause the auto-dimming inside  
mirror to malfunction, which can result in crashes and serious injuries.  
Malfunctions in the auto-dimming function can result in the inside mirror being unable to  
evaluate the exact distance of vehicles in the rear or other objects.  
If the light striking the sensor is filtered or blocked (such as by a sunshade), the auto-dimming  
inside mirror will not work properly or may not work at all.  
Outside mirrors  
Fig. 110 In the driver door: Adjusting knob for outside mirrors.  
Please first read and note the introductory information and heed the WARNINGS  
Turn the knob ⇒ꢀfig. 110 to adjust the outside mirrors.  
Turn the rotary knob to the desired position:  
Switch on outside mirror heating. Heats only at outside air  
temperatures below +68 °F (+20 °C).  
_
Adjust the left outside mirror by pressing the knob to left/right  
and up/down.  
L
Adjust the right outside mirror by pressing the knob to left/right  
and up/down.  
R
Neutral position. Outside mirror folded out, no heating or  
adjustment possible.  
0
Synchronous mirror adjustment  
In the Settings - Conveniencemenu, select Mirror adjust - Both mirrorsfor  
synchronous outside mirror adjustment.  
Turn the adjusting knob to the L position.  
Adjust the left outside mirror. The right (passenger) outside mirror will automatically adjust at the  
same time.  
If needed, correct the position of the right mirror by turning the adjusting knob to the R position.  
Auto-dimming outside mirror on the driver side  
The auto-dimming outside mirror is controlled together with the auto-dimming inside mirror, Inside  
mirror.  
Memory for front passenger side mirror (when backing up)  
Choose the remote control vehicle key that will be used with the settings about to be made.  
Unlock the vehicle with that remote control vehicle key.  
Set the parking brake.  
Switch on the ignition.  
Activate the function Mirror downin the Settings - Conveniencemenu.  
Shift the transmission into reverse.  
Adjust the passenger outside mirror for a clear view of the curb, for example.  
The adjusted mirror position is automatically stored and assigned to the vehicle key used to unlock  
the vehicle. The preselected position will be recalled when the key assigned to that mirror adjustment  
position is used again.  
Recalling passenger side mirror settings  
Turn the adjusting knob for the side mirrors to the R position.  
Shift the transmission into reverse gear with the ignition switched on.  
The mirror moves back to the regular position when the vehicle moves forwards faster than about  
10 mph (15 km/h) or the adjusting knob is turned to the O or L position.  
WARNING  
Improper use of the folding outside mirrors can cause personal injury.  
Always make sure that nobody is in the way when folding the mirrors in or out.  
Make sure that you do not get your finger caught between the mirror and the mirror base  
when moving the mirrors.  
WARNING  
Incorrectly estimating distances with the right outside mirror can cause collisions and  
serious injury.  
The right outside mirror has a convex (curved) surface. This widens your field of vision.  
But vehicles or other objects seen in a convex mirror will look smaller and farther away than  
they really are.  
If you use the right outside mirror to judge distances from vehicles behind you when  
changing lanes, you could estimate incorrectly and cause a crash and serious injuries.  
Whenever possible, use the inside mirror to more accurately judge distance and size of  
vehicles or other objects seen in the convex mirror.  
Always make sure you have a clear view to the rear of the vehicle.  
NOTICE  
Always fold in the outside mirrors when taking the vehicle through an automatic car wash.  
To reduce fuel consumption, use outside mirror heating only when needed.  
When first switched on, outside mirror heating works with maximum heat for about 2 minutes.  
If power mirror adjustment does not work, the outside mirrors can be adjusted by hand by  
pressing on the edges of the mirror surface.