Advertisement

Advertisement

Vehicle tool kit -> Contents for Your Volkswagen Passat SUV Sixth Generation (2005-2010)

Storage  
Fig. 204 In the luggage compartment under the floor panel: Compact spare wheel and vehicle tool kit.  
Please first read and note the introductory information and heed the WARNINGS  
The vehicle tool kit is in the luggage compartment in one of several places, such as under the luggage  
compartment floor panel ⇒ꢀfig. 204. It is secured with a strap and a strap lock.  
Open the luggage compartment lid Luggage compartment.  
Grasp the floor panel by the handle and lift it up in the direction of the arrow ; remove it if  
necessary.  
Completely retract the jack after use. Otherwise it will not fit in its compartment and cannot be  
stowed safely.  
When placing the vehicle tool kit back in the luggage compartment, make sure to tighten it with  
the strap and place the strap lock on the side of the kit. This will ensure that the floor panel will fit back  
in place properly.  
Contents  
Fig. 205 Contents of the vehicle tool kit.  
355  
Please first read and note the introductory information and heed the WARNINGS  
The contents of the vehicle tool kit depend on the vehicle configuration. The following describes the  
maximum contents.  
Contents of the vehicle tool kit ⇒ꢀfig. 205  
(1)  
Screwdriver with a hexagonal socket in the handle for removing or inserting previously  
loosened wheel bolts. The screwdriver blade is reversible. The screwdriver may be stored  
under the lug wrench.  
(2)  
Adapter for anti-theft wheel bolts (if applicable). Volkswagen recommends that you always carry  
the adapter for the wheel bolts in the vehicle along with the vehicle tool kit. The code number  
of the wheel bolt lock is imprinted on the front of the adapter. If lost, a replacement adapter can  
be ordered using this number. Record the code number of the wheel bolt lock and store it  
separate from the vehicle.  
(3)  
(4)  
Hubcap puller clips for removing hubcaps, wheel covers, or wheel bolt caps.  
Jack. Before putting the jack back in the foam insert, be sure to completely crank the jack down  
to its original position.  
(5)  
(6)  
Lug wrench.  
Crank.  
A front towing eye (not shown) may also be included in the vehicle tool kit ⇒ꢀpage Error! Bookmark  
not defined., Installing the front towing eye.