Roof rack -> Securing a load on the roof rack for Your Volkswagen Passat SUV Seventh Generation (2010-2014)

Only mount the base carrier at the attachment points shown in the  
illustration.  
Once you have installed the base carrier correctly, you can secure  
the roof rack on the base carrier according to the manufacturer's in-  
structions.  
WARNING  
Installing or using a base carrier or roof rack improperly can  
cause the entire system to fly off the vehicle, causing accidents  
and injuries.  
Always follow the installation instructions provided by the  
manufacturer.  
Use the base carrier and roof rack only if they are undam-  
aged and properly installed.  
Secure the base carrier only at the attachment points shown  
in the illustration (2).  
Always install the base carrier and roof rack properly.  
Make sure that all bolts and fasteners are properly installed  
and properly tightened before every trip and retighten them as  
needed after driving a short distance. During a long trip, check  
all bolts and fasteners at each stop.  
Always properly install special fixtures for items such as bi-  
cycles, skis, surfboards, etc.  
Do not modify or repair the base carrier or roof rack.  
Follow the installation instructions provided for installing the roof  
rack system. Always carry them in the vehicle.  
Securing a load on the roof rack  
¤ Please first read and note the introductory information and  
heed the WARNINGS  
It is not possible to secure a load unless the roof rack system has  
been properly installed  
.
Maximum permissible roof load  
The maximum permissible roof load is 220 lbs. (100 kg). The roof  
load is the combined weight of the roof rack and the items being car-  
ried on the roof ꢀ  
.
Be sure you know the weight of the roof rack and the items you want  
to transport on the roof. Weigh them if necessary. Never carry a total  
of more than the maximum permissible roof load.  
When using a roof rack with a lower load limit, do not load the rack to  
the maximum weight mentioned above. In this case, you may only  
load the roof rack to the weight limit specified in the system's installa-  
tion instructions.  
Distributing the load  
Distribute the load evenly and secure it properly ꢀ  
.
Checking the mountings  
After the base carrier and rook rack have been installed, check all  
bolts and fasteners after driving a short time and at regular intervals  
thereafter.  
WARNING  
If the maximum permissible roof load is exceeded, accidents  
and substantial vehicle damage may occur.  
Never exceed the specified roof load, the maximum Gross  
Axle Weight Rating, or the Gross Vehicle Weight Rating.  
Do not exceed the loading capacity of the roof rack, even if  
the permissible roof load is not fully utilized.  
Always make sure that loads are evenly distributed and that  
heavier items are, as far as possible, toward the front.  
WARNING  
Loose or improperly secured items can fall off the roof rack and  
cause accidents and injuries.  
Always use suitable, undamaged tie-down ropes and ratchet  
straps.  
Secure the load properly.