Shifting -> Pedals for Your Volkswagen Passat SUV Seventh Generation (2010-2014)

WARNING  
Failure to heed warning lights and instrument cluster text mes-  
sages can cause the vehicle to break down in traffic and result  
in a collision and serious personal injury.  
Never ignore warning lights or text WARNINGS.  
Always stop the vehicle as soon as it is safe to do so.  
Whenever stalled or stopped for repair, move the vehicle a  
safe distance off the road, turn on the emergency flashers, stop  
the engine, and use other warning devices to warn approaching  
traffic.  
NOTICE  
Failure to heed warning lights or text WARNINGS can result in  
vehicle damage.  
Pedals  
Fig. 136 Pedals in vehicles with manual transmission: 1 Accelerator  
pedal, 2 Brake pedal, 3 Clutch pedal.  
Fig. 137 Pedals in vehicles with automatic transmission: 1 Accelera-  
tor pedal, 2 Brake pedal.  
¤ Please first read and note the introductory information and  
heed the WARNINGS  
All pedals must always be able to move freely in and out without inter-  
ference from floor mats or other things.  
Only use floor mats that leave the pedal area free and are held se-  
curely in place with floor mat fasteners to help prevent sliding.  
If a brake circuit malfunctions, more brake pedal travel is needed to  
bring the vehicle to a full stop, and it is important that nothing is in the  
way when you have to depress the brake pedal harder and farther  
than normal.  
WARNING  
Objects in the driver footwell can prevent the pedals from mov-  
ing freely. This can cause loss of vehicle control and increase  
the risk of serious personal injuries.  
Always make sure that nothing can interfere with the pedals.  
Always fasten floor mats securely to the floor.  
Never put floor mats or other floor coverings on top of al-  
ready installed floor mats.  
Always make sure that nothing can fall into the driver  
footwell while the vehicle is moving.  
NOTICE  
Always make sure that the pedals are able to move freely and  
that nothing can interfere with them. If a brake circuit fails, more  
brake pedal travel will be needed to bring the vehicle to a stop.  
The brake pedal must be pressed farther and harder than nor-  
mal.  
Manual transmission: Gearshift lever  
Fig. 138 Gearshift pattern of a 5-speed manual transmission.  
Fig. 139 Gearshift pattern of a 6-speed manual transmission.  
¤ Please first read and note the introductory information and  
heed the WARNINGS  
The positions of the individual gears are shown on the gearshift lever  
fig. 138 or fig. 139.  
Depress the clutch pedal all the way and hold.  
Move the gearshift lever into the desired position ꢀ  
.
Release the clutch pedal to engage the gear.  
The clutch pedal must be fully depressed to start the engine.