Park Assist is an extension of the parking system
⇒
Introduction.
Park Assist steers the vehicle into a parking space while you operate the accelerator pedal, the gears and the brake
⇒
!
WARNING
The intelligent technology of the Park Distance Control (PDC) cannot overcome the natural laws of physics and it can only operate within the limits of the
system. Not paying attention can result in accidents, serious injuries and vehicle damage.
Pay close attention to the parking process and the traffic. Keep an eye on the parking direction at the same time.
In a hazardous situation, apply the brakes using the brake pedal.
The following functions are supported:
Display suitable parking spaces.
Select parking mode.
Driving into a suitable parallel parking space or parking bay.
Driving out of a suitable parallel parking space.
Pay attention to the message in the instrument cluster display.
NOTICE
Park Assist orients itself to parked vehicles, curbs, or other objects. Make sure the vehicle tires and rims are not damaged when parking.
If necessary, stop the parking process at the correct time.
Aftermarket accessories mounted on the vehicle, such as bicycle racks, can interfere with Park Assist and can cause damage.
Automatic braking support may occur during parking processes if the driver accelerates too much.
Searching for parking spaces
Please read the introductory information and heed the Warnings and Notice ⇒
and Safety instructions.
Fig. 109 In the center armrest: button to manually switch on Park Assist.
Selecting the parking space and parking mode
1. Press the
2. Operate the turn signal that indicates the side of the road you are parking on.
3. Press the button until the desired parking mode is selected.
button fig. 109.
Park Assist can be activated afterwards. If you drive past a suitable parking space, this will be indicated.
Driving into parking spaces
Please read the introductory information and heed the Warnings and Notice ⇒
and Safety instructions.
149
English 
