Save the passenger-side outside mirror settings when reversing
1. Unlock the vehicle using the key, to which the setting is allocated.
2. Set the parking brake.
3. Switch the ignition on.
4. Shift the transmission to neutral.
5. In the Settings - Comfort menu, activate the Mirror reading function.
6. Select the reverse gear.
7. Adjust the front passenger outside mirror so that, for example, the edge of the curb can be seen clearly.
8. Shift the transmission to neutral.
9. Switch the ignition off.
10. The selected mirror position will be stored and assigned to the vehicle key.
Open the front passenger outside mirror setting
1. Turn rotary knob for the outside mirrors to the relevant position for adjusting the front passenger outside mirror.
2. With the ignition switched on, select reverse gear. The front passenger outside mirror will adjust to the stored position.
3. The front passenger outside mirror will exit the position stored for driving in reverse when you begin driving forward faster than about 9 mph (15 km/h) or when
the knob is turned to any other position.
WARNING
Inattentively folding the outside mirrors out and in can cause injuries.
Do not fold the outside mirrors out or in if there are any obstacles in the way.
Always make sure your fingers do not get pinched between the outside mirror and the mirror base when moving the mirror.
NOTICE
If outside mirrors are not folded in when driving through a car wash, they can get damaged.
Always fold in the outside mirrors.
Do not fold power outside mirrors in or out by hand because the mirror motor could be damaged.
Leave the outside mirror heating on only as long as it is needed. Otherwise fuel will be used unnecessarily.
If there is a malfunction in the power outside mirror, you can adjust the position of the mirror manually by hand by pushing on the edge of the mirror surface.
Sunshade
Sun visors
Fig. 81 In the front of the headliner: sun visor.
Adjustment options for the sun visors
Fold toward the windshield.
100
English 
