2014-2023 Volkswagen Passat SUV Wired and wireless connections User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Wired and wireless connections for Your Volkswagen Passat SUV Eight Generation (2014-2023)

Depending on your Infotainment system and the navigation app used, you can view upcoming turns in the instrument cluster display.  
You can accept or decline incoming calls or end a call in progress using the buttons on the multi-function steering wheel.  
Voice control  
The voice control function depends on the vehicle equipment.  
1. Tap  
briefly to start the Infotainment system voice control.  
button to start voice control of the connected smartphone.  
Or: tap and hold the  
MirrorLink®  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Introduction.  
Function keys  
Returns to the App-Connect main menu. Here you can end the MirrorLink connection, connect another cell phone, or select another technology.  
close apps that are open. Then tap the apps to be closed or tap the Close all function to close all open apps. Tap to display the cell phone on the  
Tap to  
Infotainment system screen.  
Open the MirrorLink settings.  
Tap to return to the MirrorLink main menu.  
MirrorLink requirements  
Checklist  
The following requirements must be met in order to use MirrorLink:  
The cell phone must support MirrorLink.  
The cell phone must be connected to the Infotainment system via USB with data transmission.  
The USB cable used must be an original cable from your cell phone manufacturer.  
Depending on the cell phone in use, an appropriate Car Mode app must be installed on the device to use MirrorLink.  
Connecting  
When connecting a cell phone for the first time, follow the instructions on the Infotainment system screen and the cell phone display.  
The requirements must be met in order to use MirrorLink.  
Start MirrorLink:  
1. To open the App-Connect main menu, tap MENU App-Connect  
.
Or: press APP .  
2. Tap  
to connect to your cell phone.  
Disconnecting  
1. In MirrorLink mode, tap APP to go to the App-Connect main menu.  
Or: tap  
2. Tap  
to go to the MirrorLink main menu.  
to end the active connection.  
Special conditions  
When there is an active connection with MirrorLink, the following conditions apply:  
An active MirrorLink device can also be connected with the Infotainment system at the same time via Bluetooth.  
If the MirrorLink device is connected to the Infotainment system via Bluetooth, you can use the Infotainment system phone function.  
An active MirrorLink device cannot be used as a media device in the Media main menu.  
You can view information about telephone operation in the instrument cluster display.  
The instrument cluster display will not show upcoming turns or display information about media mode.  
You can accept or decline incoming calls or end a call in progress using the buttons on the multi-function steering wheel.  
Information about technical requirements, compatible cell phones, certified apps and availability can be found via the Volkswagen and MirrorLink website or  
at your authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Wired and wireless connections  
Introduction  
Some external devices can be connected to the Infotainment system using the wired and wireless connections in the vehicle, if available.  
The type and quantity of wired and wireless connections depend on the vehicle equipment and country. The connections may differ within a model line or in a mode  
with optional equipment.  
In wired connections, only use the original connecting cable that belongs to the device or the connecting cable that was placed in the vehicle at the factory, if  
166  
available.  
If the plug on the connector cable cannot be inserted, check the position and the connections.  
NOTICE  
Only use a suitable and undamaged connector cable for wired connections.  
Hold the plug on the connector cable in the correct position and insert it into the intended socket while pressing lightly. Pressing strongly can damage the  
device connection and the plug on the connector cable.  
The connector cable must not be pinched or bent sharply.  
Using unsuitable or damaged connector cables can cause malfunctions and damage to the device.  
If a connected device is not recognized, disconnect all connected devices and then reconnect the device. Check the function of the connecting cable, if necessary.  
If malfunctions occur in a connected device, restart the device. This sometimes fixes the error.  
AUX-IN jack  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
The AUX-IN jack is a wired connection. Only a suitable connector cable with a 3.5 mm stereo jack can be used for the connection.  
AUX-IN jacks are only available in some vehicles and are not in every market.  
AUX-IN jack features  
The connected external audio source plays through the vehicle speakers and cannot be controlled through the Infotainment system.  
AUX on the Infotainment system screen indicates that an external audio source is connected.  
Possible locations of the AUX-IN jack:  
On the front of the Infotainment system.  
In the front center armrest storage compartment  
In the center console.  
Connecting an external audio source  
1. Lower the volume on the Infotainment system.  
2. Connect an external audio source to the AUX-IN jack.  
3. Start playback on the external audio source.  
4. To open the Media main menu, tap MENU Media  
.
Or: to open the Media main menu, press MEDIA .  
5. Tap  
and select AUX.  
The playback volume of the external audio source should be adjusted to match the volume of the other audio sources.  
After changing the audio source on the Infotainment system, the external audio source will continue to run in the background.  
The function key for selecting the audio source ( ) in the Media main menu can vary if another audio source is connected with the Infotainment system, e.g. by  
Bluetooth , and is selected.  
Preparing external audio sources for removal  
The external audio source must be prepared for removal before disconnecting.  
1. Stop playback.  
2. Select Settings in the Media main menu.  
3. Tap the Remove safely and then  
AUX .  
4. Disconnect the external audio source connector cable from the Infotainment system.  
The Infotainment system will remain in the AUX menu after playback on an external audio source ends or after the connector is disconnected from the AUX-IN  
jack. When another audio source is selected, the external audio source will continue to run in the background.  
Interference is possible if the external audio source is powered by the 12 V outlet in the vehicle.  
USB port  
167  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
Fig. 115 Possible USB ports in the vehicle (general example).  
USB port, type C.  
USB port, type A.  
USB port types  
The vehicle may contain the following USB ports:  
Type A  
Type A  
Type C  
Type C  
: Suitable for data transfer and charging function.  
: Only suitable for charging function.  
: Suitable for data transfer and charging function.  
or  
: Only suitable for charging function.  
Every USB port is a wired connection that may only be used with a suitable connector cable.  
The USB connection supplies 5 volts, commonly used by USB devices.  
The USB type, number, and locations of the USB ports depend on the vehicle and country.  
Only supported audio files are shown. Other files will be ignored.  
When in “mass storage mode”, the Infotainment system only supports mass storage devices and audio sources. Refer to the instructions for your audio source to  
learn how to activate this mode.  
Audio files on an external data carrier connected to the USB port  
Before connecting an audio source, check which USB connection is installed in your vehicle. Only use suitable USB connector cables that match the relevant USB  
type.  
can be played and controlled through the Infotainment system.  
Possible USB port installation locations  
On the front of the Infotainment system.  
In the front center armrest storage compartment  
In the center console.  
Connecting an external data carrier to the USB port  
.
1. Lower the volume on the Infotainment system.  
2. Connect an external data carrier to the USB port  
3. Start playback on the external audio source.  
4. Open Media menu.  
.
5. Select USB  
as the media source.  
For iPods specifically, list views (Playlists, Artists, Albums, etc.) can be displayed under  
or LIST .  
Instructions and restrictions  
The number of USB ports  
and the compatibility with Apple devices and other media players depend on the vehicle equipment.  
Due to the large number of different types of data carriers and different iPod, iPad, and iPhone generations, there is no guarantee that functions will perform as  
described on all devices.  
Depending on the Infotainment system being used, external hard drives with a capacity larger than 32 GB may have to be reformatted to the FAT32 file system.  
Programs and instructions for this can be found online.  
Do not connect or use USB extension cables or USB hubs.  
Disconnecting  
The connected data carrier must be prepared for removal before disconnecting.  
168  
Apple devices and devices with “Media Transfer Protocol (MTP)” can be disconnected without logging out of the system.  
1. Tap Media settings Safely remove USB .  
The sensor field will be grayed out if the data medium was successfully disconnected.  
2. Disconnect the data carrier from the Infotainment system.  
Bluetooth® interface  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
The Bluetooth interface is a wireless connection.  
In Bluetooth audio mode, audio files that are on a Bluetooth audio source that is connected via Bluetooth, such as a cell phone, can be played through the vehicle  
speakers.  
Bluetooth audio mode is only possible in vehicles equipped with a factory-installed mobile phone interface that supports this function.  
Bluetooth profiles  
The Infotainment system is equipped with a Bluetooth interface at the factory.  
A maximum of three Bluetooth devices can be connected at the same time.  
The following Bluetooth profiles may be available in the specified version or in another version:  
HFP 1.7.  
Telephony and handsfree mode.  
A2DP 1.3.  
Music playback.  
AVRCP 1.6.  
Display and operation for music playback.  
Transfer of cover art.  
PBAP 1.2.  
Access to phone book and call lists.  
MAP 1.4.  
Access to SMS and e-mail.  
SPP 1.2.  
Serial data transfer via Bluetooth.  
Requirements  
The Bluetooth audio source must support the A2DP Bluetooth profile.  
The  
Bluetooth audio (A2DP/AVRCP) function must be activated in the Bluetooth settings menu.  
Controlling playback  
The extent that the Bluetooth audio source can be controlled by the Infotainment system depends on the type of Bluetooth audio source that is connected.  
For media players that support the AVRCP Bluetooth profile, playback from the Bluetooth audio source can be started or stopped automatically when Bluetooth  
audio mode or another audio source is selected. Depending on the Bluetooth audio source, it may also be possible to display and play the track on the Infotainmen  
system.  
Because of the large number of possible Bluetooth audio sources, it is not possible to guarantee that all functions described can be performed correctly.  
On a connected Bluetooth audio source, all warning and operation tones, such as touch tones on a cell phone, should generally be switched off to avoid  
interference and malfunctions.  
Depending on the device, if an external media player is connected to the Infotainment system via Bluetooth and the USB port  
Bluetooth audio connection may be automatically disconnected.  
at the same time , the  
Connecting an external audio source via Wi-Fi  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
The Wi-Fi connection is a wireless connection.  
In Wi-Fi audio mode, sources such as cell phones that are connected via Wi-Fi can be used for audio streaming.  
The availability of the Wi-Fi function depends on the country and the Infotainment system being used.  
Requirements  
The connected audio source must have a suitable app or must support media sharing using the UPnP standard.  
169  
There must be a Wi-Fi connection to the audio source.  
Starting Wi-Fi audio streaming  
1. Lower the volume on the Infotainment system.  
2. To open the Media main menu, tap MENU MEDIA  
.
3. Start the UPnP server application or a suitable app for audio streaming on the Wi-Fi audio source.  
4. Tap and select Wi-Fi .  
5. Follow the instructions shown on the Infotainment system screen and on the Wi-Fi audio source screen.  
The function key for selecting the audio source ( ) in the Media main menu can vary if another audio source is connected with the Infotainment system, e.g. by  
USB  
, and is selected.  
Controlling playback  
The extent to which the Wi-Fi audio source can be controlled by the Infotainment system depends on the type of Wi-Fi audio source that is connected.  
170  

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot