Advertisement

Advertisement

Child seats -> Securing systems for Your Volkswagen Polo SUV Seventh Generation (2021-2025)

Rear-facing child seats may be used on the front passenger seat only if the front passenger front airbag has been switched off . A  
switched off front passenger front airbag is indicated by means of the continuously lit yellow PASSENGER AIR BAG indicator lamp  
in the driver’s field of vision (→ Indicator lamp for standard airbag system).  
It is not possible to switch off the front passenger front airbag in all countries (→ Airbag system).  
If using a  
, do not deactivate the front passenger front airbag. When fitting the child seat, ensure that it is as  
far away as possible from the front passenger front airbag. The front passenger front airbag can cause severe injuries when it inflates  
.
Some child seats are not suitable for use on the front passenger seat. The child seat must be specially authorised by the manufacturer  
for use on the front passenger seat in vehicles with front and side airbags. Authorised Volkswagen repairers keep an up-to-date list of  
authorised child seats.  
DANGER  
Observe the important safety instructions for the front passenger front airbag (→ Airbag system).  
DANGER  
If you use a rear-facing child seat on the front passenger seat, the child sitting in it is at increased risk of sustaining serious or life-  
threatening injuries or being killed in the event of an accident.  
Never secure a rear-facing child seat to the front passenger seat if the front passenger front airbag is switched on.  
Deactivate the front passenger front airbag if you want to install a child seat on the front passenger seat. If the front passenger  
front airbag cannot be deactivated, you must not use rear-facing child seats.  
In order to establish the maximum possible distance from the front passenger front airbag, move the front passenger seat as far  
back as possible and adjust to the highest position.  
When fitting a child seat of the size class C/ISOFIX class R3, move the front passenger seat as far back as possible and adjust to a  
bottom to middle position.  
Move the backrest to the upright position.  
Set the seat belt height so that the seat belt routing follows a natural path adapted to the child seat without excessive deviations.  
For rear-facing child seats, use the lowest position of the seat belt height adjuster.  
Only use child seats that have been approved by the child seat manufacturer for use on a front passenger seat with front and side  
airbags.  
WARNING  
Child seats present a risk of injury if incorrectly installed.  
Always read and follow the installation instructions and warning information provided by the child seat manufacturer.  
WARNING  
Using a forward-facing child seat on the front passenger seat presents a risk of injury.  
In order to establish the maximum possible distance from the front passenger front airbag, move the front passenger seat as far  
back as possible and adjust to the highest position.  
Move the backrest to the upright position.  
Set the seat belt height so that the seat belt routing follows a natural path adapted to the child seat without excessive deviations.  
For rear-facing child seats, use the lowest position of the seat belt height adjuster.  
Only use child seats that have been approved by the child seat manufacturer for use on a front passenger seat with front and side  
airbags.  
WARNING  
A triggered curtain or side airbag can cause injuries.  
Ensure that no children are seated within the airbag deployment zones .  
Do not place any objects in the airbag deployment zones.  
Different countries use different securing systems for safely fitting child seats in the vehicle.  
Please only ever use the securing systems described here to secure child seats to the vehicle.  
Overview of securing systems  
: ISOFIX and i-Size are standardised securing systems for fitting child seats in the vehicle quickly and safely. The ISOFIX  
or i-Size attachment system creates a rigid connection between the child seat and the car body.  
The seat has two rigid attachment arms. The attachment arms click into ISOFIX retaining rings between the seat cushion and the  
backrest (→ Child seat with ISOFIX or i-Size). A top tether or a support foot may sometimes have to be used in addition to the ISOFIX  
anchor points described above.  
: it is better to secure child seats using the ISOFIX system, if available, rather than with a three-point  
automatic seat belt (→ Child seat with seat belt).  
Additional securing points:  
: the strap at the top of the child seat is routed over the backrest and hooked to an anchor point located on the back of the  
rear seats and front passenger seat (→ Child seat with top tether). Top tether anchor points are marked with an anchor symbol.  
: some child seats are supported by a support foot resting on the floor of the vehicle. This support foot helps prevent  
the child seat tipping forward in a crash. Child seats with a support foot can only be used on the front passenger seat and the outer  
rear seats →  
.
Recommended child seat securing systems  
Volkswagen recommends that child seats are secured as follows:  
:
ISOFIX/i-Size and top tether.  
ISOFIX/i-Size and support foot.  
:
ISOFIX/i-Size and top tether.  
ISOFIX/i-Size and support foot.  
:
ISOFIX/i-Size and, if applicable, top tether.  
ISOFIX/i-Size and, if applicable, support foot.  
WARNING  
Unsecured or inadequately secured children can suffer serious or fatal injuries in the event of a sudden driving or braking manoeuvre  
and in an accident.  
Observe the specifications of the child seat manufacturer when installing the child seat in the vehicle and securing the child in the  
child seat.  
Do not use child seats that must be secured in the vehicle with lower tethers according to the child seat manufacturer’s  
instructions.  
WARNING  
Incorrect use of the support foot can cause severe or fatal injuries.  
Ensure that the support foot is always correctly and safely installed.  
Always read and follow the installation instructions and warning information provided by the child seat manufacturer.  
Do not transport children in child seats with a support foot if the weight of the child seat, including the child, exceeds a total  
weight of 33 kg (around 73 lbs).  
WARNING  
Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no  
circumstances are they to be used for adult seatbelts, harnesses, or for attaching other items or equipment to the vehicle.  
Quick guide to ISOFIX and i-Size installation  
The identification marking of the ISOFIX or i-Size anchor points is equipment and country dependent.  
I-Size anchor points are not available on the front passenger seat in some countries.