Advertisement

Advertisement

Cruise Control System -> Operating the cruise control system for Your Volkswagen Polo SUV Seventh Generation (2021-2025)

Left-hand side of the multifunction steering wheel.  
Switching on  
1. Press the  
button.  
No speed is stored. The system is not yet active.  
Starting control  
1. While driving, press the  
button.  
The cruise control system stores and regulates the current speed.  
Adjusting the speed  
You can adjust the stored speed during speed control by the cruise control system:  
+ 1 km/h (1 mph):  
Press the  
button.  
button.  
- 1 km/h (1 mph):  
Press the  
+ 10 km/h (5 mph):  
Press the button. The first time it is pressed, it jumps to the next higher ten (km/h) or five (mph) increment.  
- 10 km/h (5 mph):  
Press the button. The first time it is pressed, it jumps to the next lower ten (km/h) or fives (mph) increment  
Press and hold the or button to continuously change the stored speed.  
The vehicle adapts the current speed, but does not actively brake.  
Cancelling system control  
1. Briefly press the  
or  
button.  
depress the brake pedal.  
The speed remains stored in the memory.  
Resuming control  
1. Press the  
button.  
The cruise control system resumes operation with the stored speed and regulates the speed again.  
WARNING  
There is a risk of an accident if you unintentionally resume a stored speed or if the stored speed is too high for the current road,  
traffic and weather conditions. This can cause serious injuries or death.  
Check whether the stored speed is suitable for the current road, traffic and weather conditions before you resume cruise control.  
Switch off the cruise control system when you do not need it.  
Switching off  
1. Press and hold the  
button.  
The cruise control system is switched off and the stored speed is deleted.  
Changing to the speed limiter  
1. Press the  
button.  
2. Select the speed limiter on the instrument cluster display.  
The cruise control system is switched off.  
Depending on equipment, the  
button is either on the multifunction steering wheel or on the turn signal lever.  
Cruise control system faulty  
Malfunction. The indicator lamp lights up yellow.  
1. Switch off the cruise control system and go to a suitably qualified workshop. Volkswagen recommends using an authorised  
Volkswagen repairer.  
Control is interrupted automatically  
You have kept the clutch depressed for an extended period.  
The vehicle has exceeded the stored speed for an extended period.  
No gear is engaged for forward travel.  
Brake support systems, e.g. TCS or ESC, have performed an intervention.  
The vehicle was braked by the Automatic Emergency Braking system (Front Assist).  
If the problem persists, switch off the cruise control system and go to a suitably qualified workshop. Volkswagen recommends using  
an authorised Volkswagen repairer.