The boot lid is locked automatically after it is closed.
If the vehicle is completely unlocked, the boot lid will not lock automatically when closed.
Temporarily deactivating the keyless locking and starting system Keyless Access
Keyless Access can be deactivated temporarily as described below so that the vehicle cannot be unlocked and started due to misuse by
unauthorised third parties.
1. Lock the vehicle with the
button on the vehicle key.
2. Then touch the sensor on the outside of the door handle once within 5 seconds → Fig. 2 B . Do not put your hand around the
door handle when doing this.
Keyless Access is now temporarily deactivated.
3. To check deactivation, wait for at least 10 seconds and then pull the door handle again.
It should not be possible to open the door.
When the vehicle is next unlocked, it can be unlocked only using the vehicle key. The keyless locking and starting system Keyless
Access is reactivated the next time the vehicle is unlocked.
Operating the convenience functions
The electric windows can be closed automatically.
The glass roof is also closed in vehicles with a glass roof.
1. Place a finger on the sensor of the driver or front passenger door handle for a few seconds → Fig. 2 B .
The sensor functions can be set in the Vehicle settings menu in the Infotainment system.
The unlocking function is deactivated for a few seconds so that you can check that the vehicle has been locked successfully.
A vehicle with DSG® dual clutch gearbox can be locked only when the parking lock is engaged.
The entire vehicle will be unlocked if the sensor is touched twice, even if a single door has already been unlocked.
Keyless Access does not work
The function of the door handle sensors may be restricted if they become very dirty.
1. Clean the sensors.
All turn signals flash four times
The vehicle key used last is still in the vehicle.
1. Remove the vehicle key and lock the vehicle.
English 