In the centre console: button for Park Distance Control.
Switching on
1. Select reverse gear.
press the
button → Fig. 1.
the vehicle rolls backwards.
Switching off
1. Disengage reverse gear and then press the
move the selector lever to position
button → Fig. 1.
.
Park Distance Control also switches itself off if the vehicle is driven forwards at higher speed.
If the screen display is closed by means of the function button in the Infotainment system, Park Distance Control still
provides an acoustic warning about obstacles.
Automatic activation when driving forwards
The function can be switched on and off in the Park Distance Control settings in the Infotainment system.
Park Distance Control is activated automatically when an obstacle is encountered in the front area, such as in heavy traffic, or when
driving into a garage.
1. Tap the home button to close the Park Distance Control display again.
No automatic braking intervention takes place (→ Automatic braking intervention). The braking intervention can be switched
on by means of the
function button.
Automatic activation is available again under the following conditions:
—The vehicle was accelerated to over a speed of around 15 km/h (around 9 mph) and then slowed down below this speed again.
the ignition was switched off and then back on again.
a position was selected from the parking lock position
.
If an obstacle is detected in front of the vehicle, the Park Distance Control display appears on the Infotainment system. An
acoustic signal also sounds if the vehicle continues to approach the obstacle.
English 