If the activation word is deactivated, voice control cannot be activated using the activation word.
1. Open the app overview and tap
Voice control Voice control start/end sound or Activation word.
tap HOME
Voice control Activation word.
Voice commands
Voice control recognises only voice commands in the language set in the Infotainment system.
Observe the following tips for successful voice commands:
Speak clearly and at normal volume. Speak slightly louder at higher speeds.
Avoid excessive emphasis or strong dialect.
Do not leave long pauses when speaking.
Avoid exterior and background noise.
Do not point the airflow from the vents towards the microphones or roof.
Opening suggested voice commands
1. Open the app overview and tap
open app overview and tap
.
.
Depending on the content of the telephone book, it may be advisable to swap the order of the contact’s forename and
surname to ensure it is reliably recognised from the telephone book.
Starting the voice control function
1. Activate activation word (→ Voice control).
2. Say the activation word (→ Voice control).
press
or
on the multifunction steering wheel.
tap VOICE .
Depending on the mobile telephone and operating system and on some Infotainment systems, voice control of a connected
mobile telephone can be started by pressing and holding the or button, the sensor field, or the VOICE button .
Ending voice control manually
1. To open suggestions for a voice command for ending voice control, open the app overview and tap
open the app overview and tap General.
press on the multifunction steering wheel twice in quick succession or
General.
once.
Voice control is ended automatically in the following cases:
— Functions are used on the Infotainment system.
—The parking system is activated.
—During an incoming call.
—During voice outputs and warnings of the navigation system.
English 