One-touch opening and closing does not work
One-touch opening and closing is deactivated if the 12-volt vehicle battery has been disconnected or discharged while the windows
were not fully closed. The function will have to be reset.
1. Switch on the ignition.
2. Close all windows and doors.
3. Pull up the button for the window and hold it in this position for a few seconds.
4. Let go of the button, then pull it up again and hold it in this position.
One-touch opening and closing is now ready for operation.
The one-touch function can be restored for individual windows or for several windows at the same time.
Touch panels react differently than expected
Moisture, dirt and grease can impede the functioning of the touch panels.
1. Always keep touch panels clean and dry.
English 