Advertisement

Advertisement

Wipers -> Troubleshooting for Your Volkswagen Polo SUV Seventh Generation (2021-2025)

Washer fluid level too low  
The indicator lamp lights up yellow.  
1. Fill up the washer fluid reservoir as soon as possible (→ Washer fluid).  
Fault in wipers  
The indicator lamp lights up yellow.  
The wipers do not wipe.  
1. Go to a suitably qualified workshop. Volkswagen recommends using an authorised Volkswagen repairer.  
Fault in rain and light sensor  
The indicator lamp lights up yellow.  
The wipers are not switched on automatically if it rains during rain and light sensor operation.  
1. Go to a suitably qualified workshop. Volkswagen recommends using an authorised Volkswagen repairer.  
Changes in the response of the rain and light sensor  
Possible causes for faults and misinterpretations relating to the sensitive surface of the rain and light sensor (→ Front view) include:  
a film of water or smears caused by damaged wiper blades can increase the time the wipers are switched on,  
can shorten the length of the intervals between wipes or cause the wipers to run quickly and continuously.  
insects hitting the windscreen surface can cause the wipers to be activated.  
in winter, salt deposits can cause the wipers to continue to wipe the windscreen when it is almost dry.  
dry dust, wax, windscreen coatings (lotus effect), or detergent deposits (from an automatic car wash) can cause the rain and  
light sensor to become less sensitive and react too slowly, or prevent it from reacting at all. Clean the sensitive surface of the rain  
and light sensor at regular intervals and inspect the wiper blades for damage (→ Vehicle care, exterior).  
a wipe cycle will be triggered if the rain and light sensor is switched on when the windscreen is impacted  
by a stone. The rain and light sensor will then register the reduction in sensitivity of the surfaces and adjust accordingly. The size of  
the crack can affect the way in which the rain and light sensor activates the wipers.  
The wipers will try to wipe away any obstacles that are on the window. The wipers will stop moving if the obstacle blocks their  
path.  
1. Remove the obstacle and switch the wipers back on again.