3
The power liftgate may be closed by pressing the button, When the RKE transmitter button is pressed and the
located in the upper left trim in the liftgate opening. Flash Lights feature is enabled, the tail lights will flash to
Pushing once will only close the liftgate. This button signal that the liftgate is opening or closing.
cannot be used to open the liftgate.
WARNING!
During power operation, personal injury or cargo
damage may occur. Ensure the liftgate travel path is
clear. Make sure the liftgate is closed and latched
before driving away.
NOTE:
•
If anything obstructs the power liftgate while it is
closing or opening, the liftgate will automatically
reverse to the closed or open position, provided it
meets sufficient resistance.
Power Liftgate Switch
4
•
There are also pinch sensors attached to the side of the
liftgate opening. Light pressure anywhere along these
strips will cause the liftgate to return to the open
position.
•
•
The power liftgate will not operate in temperatures
below Ϫ12°F (Ϫ24°C) or temperatures above 143°F
(62°C). Be sure to remove any buildup of snow or ice
from the liftgate before pressing any of the power
liftgate buttons.
•
The power liftgate must be in the full open or close
positions for any of the buttons to operate. If the
liftgate is not in the full open or close positions, it must
be opened or closed manually.
If the power liftgate encounters multiple obstructions
within the same cycle, the system will automatically
stop and must be opened or closed manually.
•
•
If the liftgate release button is activated while the Gas props support the liftgate in the open position.
power liftgate is closing, the liftgate will reverse to the However, because the gas pressure drops with tempera-
full open position.
ture, it may be necessary to assist the props when
opening the liftgate in cold weather.
The power liftgate buttons will not operate if the shift
lever is in gear or the vehicle speed is above 0 mph
(0 km/h).
English 