1
REAR BACK UP CAMERA — IF EQUIPPED
CAUTION!
Your vehicle may be equipped with a Rear Back Up
Camera System that allows you to see an on-screen image
of the rear of your vehicle whenever the shift lever is put
into REVERSE. The camera image will be displayed on
the Navigation/Multimedia radio display screen, located
on the center stack of the instrument panel. The camera is
located in the light bar over the rear license plate.
•
•
To avoid vehicle damage, the Rear Back Up Cam-
era System should only be used as a parking aid.
The Rear Camera system is unable to view every
obstacle or object in your drive path.
To avoid vehicle damage, the vehicle must be
driven slowly when using the Rear Back up Cam-
era System to be able to stop in time when an
obstacle is seen. It is recommended that the driver
look frequently over his/her shoulder when using
the Rear Back Up Camera System.
WARNING!
Drivers must be careful when backing up even when
using the Rear Back Up Camera System. Always
check carefully behind your vehicle, and be sure to
check for pedestrians, animals, other vehicles, ob-
structions, or blind spots before backing up. You are
responsible for the safety of your surroundings and
must continue to pay attention while backing up.
Failure to do so can result in serious injury or death.
NOTE: If snow, ice, mud, or anything else builds up on
the camera lens, clean the lens, rinse with water, and dry
with a soft cloth. Do not cover the lens.
2
Turning the Rear Camera On or Off — With
Navigation/Multimedia Radio
Turning the Rear Camera On or Off — Without
Navigation/Multimedia Radio
1. Press the “menu” hard key.
1. Press the “menu” hard key.
2. Select “system setup” soft key.
3. Press the “camera setup” soft key.
2. Select “system setup” soft key.
3. Enable or disable the rear camera feature by selecting
“enable rear camera in reverse” soft key.
4. Enable or disable the rear camera feature by selecting
“enable rear camera in reverse” soft key.
4. When the vehicle is shifted into REVERSE, an image of
the rear of the vehicle will appear with a caution note to
“check entire surroundings” displayed across the top of
5. Press the “save” soft key.
6. When the vehicle is shifted into REVERSE, an image of the screen. After five seconds this note will disappear.
the rear of the vehicle will appear with a caution note to
5. When the vehicle is shifted out of REVERSE, the rear
“check entire surroundings” displayed across the top of
camera mode is exited and the audio screen appears
the screen. After five seconds this note will disappear.
again.
7. When the vehicle is shifted out of REVERSE, the rear
camera mode is exited and the navigation or audio screen
appears again.
English 