Get Driver information system Guide for Volkswagen T Cross SUV First Generation (2018-2025)

Operation

Driver information system

— Press the or button above the control panel

of the air conditioner.

Analogue instrument cluster

The ventilation is switched on with maximum venti-

lation output. By repeatedly pressing the button, the

ventilation output is reduced until it is switched off.

Overview

Overview of instrument cluster

The ventilation output is indicated by the number of

illuminated indicator lights in the button.

The ventilation can be adjusted with the igni-

tion on. The ventilation is only switched on af-

ter the engine has been started.

A

B

C

D

E

F

Tachometer with indicator lights

Display

Speedometer with indicator lights

Bar with indicator lights

Coolant temperature gauge

Multifunction button

:

— Setting the time

— Display service interval

Multifunction button

G

H

:

— Reset odometer (trip)

Fuel gauge

NOTICE

Risk of serious damage to the engine and the ex-

haust system!

Never run the fuel tank completely empty!

·

In poor visibility and with dipped headlights

off, the brightness of the instrument cluster

lighting is reduced to remind the driver to turn on

the light.

Display overview

The following information is shown in the display:

58

Driver information system

Settings

Setting the language

The language is set in the following menu in the In-

fotainment system:

Applies to 7″ Infotainment:

General Language

Applies to 10″ Infotainment:

System Language selec-

tion

A

B

Time

Selected gear/gear recommendation

Resetting the odometer

Also included depending on vehicle equipment:

— Press the

ter.

button in the instrument clus-

— Automatic gearbox selector lever positions

Menu, indicator lights and information

Outside temperature

C

Display service interval

D

— Press the

twice.

button in the instrument cluster

- low outside temperature

Total distance travelled

E

F

— Press the

interval.

button to display the service

button again to leave the

trip – Distance travelled after resetting the

memory

— Press the

menu.

Overview of the main menu items of the display

— Driving data » page 61, Overview

— Audio - Using radio and media

Setting the time

— Press the

button in the instrument cluster.

button in the instrument clus-

— Telephone - Call list, accept or reject an incoming

call

— Press the

ter.

— Vehicle - Vehicle condition » page 63, Display.

The display shows the hour setting.

— Press the button

hours.

repeatedly to set the

Operation

— Press the

setting.

button to change to the minute

repeatedly to set the

Operation via the multifunction steering wheel

— Press the button

minutes.

The time is set in the Infotainment system in the fol-

lowing menu.

Applies to 10″ Infotainment:

System Time and Date

Setting the brightness of the instrument cluster

lighting

The brightness of the instrument lighting is adjusted

automatically according to the given lighting condi-

tions.

The brightness of the instrument lighting is set in

the Infotainment in the following menu.

Switch between menu items / Return to main

menu

Applies to 10″ Infotainment:

Car Light settings

Confirm menu item

Select information/Set values

Show previous menu (if one has been selec-

ted) / display Telephone menu

Analogue instrument cluster

59

— Telephone - Call list, accept or reject an incoming

call

Digital instrument cluster

— Vehicle - Vehicle condition » page 63, Display.

Overview

Overview of instrument cluster

Operation

Overview of the buttons on the multifunction steer-

ing wheel

A

Central display area with selected information:

— Speed

— Time

— Warning lights

Switch between menu items / Return to main

menu

— Messages and information

— Outside temperature

Confirm menu item

- low outside temperature

Select information/Set values

Set the variant of the display

B

C

Display area with selected information:

— Coolant temperature gauge

— Warning lights

Display area with selected information:

Settings

— Fuel gauge

— Warning lights

Setting the language

The language is set in the following menu in the In-

fotainment system:

D

E

Display area with additional information.

Display area with selected information:

— Gear engaged

Applies to 10″ Infotainment:

System Language selec-

tion

— Selector lever positions of the automatic

transmission (depending on the vehicle

equipment)

Setting the time

The time is set in the following menu in the Infotain-

ment system:

— Warning lights

— Information from the assistance systems

— Total distance travelled

— Range

Applies to 10″ Infotainment:

System Time and Date

Select and set the display variant

— Press the

ing wheel.

button on the multifunction steer-

NOTICE

— Select one of the following display variants.

Risk of serious damage to the engine and the ex-

haust system!

Never run the fuel tank completely empty!

·

Overview of the main menu items

— Driving data » page 61, Overview

— Audio – Operate radio

60

Driver information system

A

B

C

D

E

Average fuel consumption

Driving time

Distance travelled

Average speed

Range

Memory

The system saves the driving data in the following

memories:

Digital display

Speedometer

Since start

Sport display (rev. counter)

— Driving data from the time of switching on the ig-

nition until the ignition is switched off again is

stored in the memory. If the journey is interrup-

ted for more than 2 hours, the memory will be re-

set.

Setting the brightness of the instrument cluster

lighting

The brightness of the instrument lighting is adjusted

automatically according to the given lighting condi-

tions.

Long-term

— The driving data of all trips up to a total of 99

hours and 59 minutes driving time or 9999 km

driving distance is stored in the memory. If one of

the listed values is exceeded, the memory is reset.

The brightness of the instrument lighting is set in

the Infotainment in the following menu.

Applies to 10″ Infotainment:

Car Light settings

Since refuel

— Driving data from the time the fuel tank was last

filled is stored in the memory. The memory is re-

set the next time the tank is filled.

Driving data

Overview

The driving data display works with the ignition

switched on.

In the instrument cluster display

Depending on the equipment, the display of the in-

strument cluster shows information such as speed,

fuel consumption, range, etc.

In Infotainment

Applies to 10″ Infotainment:

Driving data

61

Resetting the memory in the infotainment system

Operation

Applies to 10″ Infotainment:

Car Instrument cluster

Display the travel data in the instrument cluster dis-

play

Settings

Select driving data to be displayed

Applies to 10″ Infotainment:

Car Instrument cluster

Setting units

Applies to 10″ Infotainment:

System Units

Speed limit warning

— Press

travel data.

— Select the details using the

— Press to confirm the details.

and select the menu item for the

Usage

key.

Adjustable speed limit

The system offers the possibility to set a speed limit

beyond which an acoustic warning signal will sound

and the following warning message appears in the

display of the instrument cluster.

Displaying driving data in the infotainment system

Applies to 10″ Infotainment:

— Tap on

.

— By moving your finger sideways, choose the

screen with the menu item for the travel data.

Preset speed limit 80 km/h and 120 km/h

Only applies to some countries due to country-spe-

cific legal requirements.

— Select the menu item for the travel data.

The system automatically alerts you when you are

exceeding the speed limit of 80 km/h and 120 km/h.

Select memory for driving data in the display of the

instrument cluster and reset it

If the speed exceeds 80 km/h, an audible warning

signal will sound and the symbol

the display.

will appear in

The audible warning sounds at regular intervals of

two minutes until the speed is reduced.

If the speed exceeds 120 km/h, an audible warning

signal will sound and the

the display.

symbol will appear in

— To select the memory for the displayed travel da-

Settings

ta, press the

key repeatedly.

— To reset the memory, press and hold the

key.

Setting the speed limit

— Select Warning at or (depending on the display

type) and confirm.

Selecting the memory in the infotainment system

Applies to 10″ Infotainment:

— When the vehicle is stationary, set the desired

speed limit and confirm.

— Tap on

.

— By moving your finger sideways, choose the

screen with the menu item for the travel data.

— While driving, drive at the desired speed and con-

firm it as the speed limit.

— Select the menu item for the travel data and the

desired memory.

Resetting the speed limit

— Select Warning at or (depending on the display

type) and confirm.

62

Driver information system

— To reset the speed limit, confirm the stored value.

7″ Infotainment

If the journey is interrupted for more than 2 hours,

the set limit is deactivated, but the set value re-

mains stored.

Infotainment overview

Vehicle status

Display

Applies to 10″ Infotainment:

The vehicle status is displayed in the following menu

in the infotainment system:

— Tap on

.

— Select the vehicle status menu item screen by

moving your finger sideways.

— Select the menu item for the vehicle state.

The following information is displayed:

— Vehicle condition warnings

A

B

C

Touchscreen

USB-connection

Microphone

— Display of information on the status of the

START-STOPP system

NOTICE

Danger of screen damage!

The Infotainment screen is operated by touching

it lightly with your finger.

·

Functionality

In the event of a system fault, messages regarding

the fault in question are displayed on the instrument

cluster display when the ignition is switched on.

System

Messages in relation to faults can also be displayed

in the Infotainment.

Restriction

For safety reasons, operation of some Infotainment

functions while driving is not possible or is restric-

ted.

The warning messages will continue to be dis-

played until the malfunctions have been rem-

edied. After the first display of the message, only

the indicator lights (Hazard) or (Warning) are

displayed.

The Infotainment system indicates this by means of

a message in the screen.

Basic settings

Setting basic functions

The following Infotainment functions are set by tap-

ping on

General:

—

Language

Set Date

Factory Reset

Set sound

The Infotainment sound is set in the menu

Audio.

Vehicle status

63

Driver information system for Your Volkswagen T Cross SUV First Generation (2018-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals