Advertisement

Advertisement

Lights and vision -> Coming Home and Leaving Home function (orientation lighting) for Your Volkswagen T-Roc SUV First Generation (2017-2025)

WARNING  
Accidents and serious or fatal injuries can occur if the vehicle is parked without sufficient illumination, as other road users might have  
difficulty seeing the vehicle, or may not see it at all.  
Always park the vehicle safely and with sufficient lighting.  
Observe any applicable country-specific legal requirements.  
Switch on the parking light on the right or left side if possible if illumination of the vehicle for several hours is necessary.  
The Coming Home and Leaving Home function lights up the area immediately surrounding the vehicle when you get in or out of the  
vehicle in darkness.  
Depending on equipment, the vehicle can have an automatic or manual Coming Home function:  
the Coming Home and Leaving Home functions are controlled automatically by a rain and light  
sensor.  
the Coming Home function is switched on manually.  
The Leaving Home function is controlled automatically by a rain and light sensor.  
The switch-off delay can be set and the function activated or deactivated in the vehicle settings in the Infotainment system (→ Vehicle  
settings menu).  
Switching on the automatic Coming Home function  
1. Switch off the ignition.  
The Coming Home lighting is switched on when the light switch is in position  
The switch-off delay starts when the last vehicle door or the boot lid is closed.  
and the rain and light sensor detects darkness.  
Switching on the manual Coming Home function  
1. Switch off the ignition.  
2. Operate headlight flasher.  
The Coming Home lighting is switched on when the driver door is opened. The switch-off delay starts when the last vehicle door or the  
boot lid has been closed.  
Switching off the Coming Home function  
1. Automatically after the set switch-off delay has elapsed.  
automatically if a vehicle door or the boot lid is opened approximately 30 seconds after switch-on.  
switch off the lights.  
switch on the ignition.  
Switching on the Leaving Home function  
1. Unlock the vehicle when the automatic headlights function  
is switched on and the rain and light sensor detects darkness.  
Switching off the Leaving Home function  
1. Automatically after the switch-off delay.  
lock the vehicle.  
switch off the lights.  
switch on the ignition.  
Some settings can be stored in the personalised user accounts and therefore change when the user account changes.  
When dipped beam is switched on, a cornering light is switched on when turning slowly or driving around very tight bends.  
When reverse gear is engaged, the cornering light on both sides of the vehicle switches on to provide better illumination of the  
surrounding area when manoeuvring.