Advertisement

Advertisement

Checking and filling -> Washer fluid for Your Volkswagen Taos SUV First Generation (2022-2025)

Only fill fluids into the designated filler openings.  
Fluids leaking from the vehicle can cause environmental damage.  
1. Regularly check the ground beneath the vehicle.  
2. If you see spots of fluid on the ground under the vehicle, have the vehicle checked by an authorized Volkswagen dealer o  
authorized Volkswagen Service Facility. Volkswagen recommends contacting an authorized Volkswagen dealer or  
authorized Volkswagen Service Facility.  
3. Dispose of leaking fluids correctly.  
Washer fluid  
General information  
The windshield washer fluid reservoir is located in the engine compartment.  
Fig. 166 In the engine compartment: Cap on the washer fluid reservoir (general example).  
The washer fluid reservoir is identified with the  
symbol on the cap fig. 166.  
1. Check the washer fluid level regularly and fill if necessary.  
Preparations  
1. Prepare the vehicle for work in the engine compartment page , In the engine compartment.  
2. Open the hood.  
Checking and refilling  
1. Check if there is enough washer fluid in the reservoir.  
2. To top it up, mix clean water with a suitable alcohol-based windshield cleaner. Follow the mixing instructions on the  
packaging of the windshield cleaner  
, ⇒  
.
382  
3. When the outside temperatures are cold, an anti-freeze agent should be added to the water so that it does not freeze.  
Follow the mixing instructions on the packaging of the anti-freeze agent.  
There is a screen in the filler tube in the windshield washer fluid reservoir. The screen keeps large particles of contaminants  
from entering the washer nozzles when you refill the washer fluid ⇒  
.
Do not use distilled water to fill the windshield washer fluid tank.  
WARNING  
Unsuitable additives in the windshield washer fluid can create an oily film on the vehicle windshield. This may reduce  
visibility and increase the risk of accidents and serious or fatal injuries.  
Never add coolant additive or similar unsuitable additives to the windshield washer fluid.  
NOTICE  
Using a cleaning agent that contains acid may result in damage and cause the spray nozzles to malfunction.  
Never top up the windshield washer fluid tank using a cleaning agent that contains acid, e.g. vinegar-based  
cleaners.  
NOTICE  
Mixing different windshield cleaners can cause the components to flocculate and the spray nozzles to clog.  
Only use suitable alcohol-based windshield cleaners.  
Never mix different windshield cleaners together.  
NOTICE  
When you top up the windshield washer fluid, if you use a damaged screen or do not use a screen at all, dirt particles may  
get into the windshield washer fluid tank. The spray nozzles may become clogged.  
Take the screen out only to clean it.  
Replace a damaged or missing screen.  
Engine oil  
Introduction  
The engine oils are determined based on the requirements of the engines, emissions control systems, and the fuel quality. On  
all combustion engines, the engine oil comes into contact with combustion residue and fuel, which affects the aging of the  
engine oil. Using the correct engine oil is essential for the function and service life of the engine. The vehicle is filled at the  
factory with a special multi-purpose, low-viscosity oil that can generally be used year-round.  
The vehicle can consume engine oil. The engine oil consumption can vary and can change throughout the service life of the  
vehicle. Depending on the driving style and the usage conditions, the engine oil consumption can be up to 1 l (1 qt) per  
2000 kilometers (1200 miles); it can also be higher within the first 5000 kilometers (3100 miles) on new vehicles. Because of  
this, the engine oil level must be checked regularly and it is best to check the level before long drives.  
383