Advertisement

Advertisement

Comfort drive Travel Assist for Your Volkswagen Taos SUV First Generation (2022-2025)

if necessary!  
Driving with Travel Assist  
Travel Assist automatically regulates the speed and steers the vehicle. Within the system limitations, Travel Assist can also  
bring the vehicle to a halt behind a stopping vehicle and drive on again.  
You can override the Travel Assist regulation function at any time.  
Displays  
Fig. 117 In the instrument cluster display: Display during active control.  
Adaptive lane guidance is active.  
Set distance, no vehicle recognized in front.  
Indicator lights on the instrument cluster display show the Travel Assist status, depending on the vehicle equipment:  
Travel Assist active, Adaptive Cruise Control and adaptive lane guidance active.  
Cruise Control active and adaptive lane guidance passive.  
Travel Assist active, Adaptive  
Driver intervention request  
If you remove your hands from the steering wheel, the system will ask you to take over the steering wheel after a few seconds  
with a message in the instrument cluster display and with audible warnings.  
If you do not respond, the system warns you with a brief braking maneuver.  
Travel Assist is then deactivated.  
Alternatively, Emergency Assist is activated, depending on the vehicle equipment. If Emergency Assist is unavailable, Travel  
Assist will be deactivated.  
WARNING  
Travel Assist is not a replacement for the driver's attention and works only within the system limitations. Travel Assist  
cannot detect all driving situations and may not react, may react with a delay, or may react in a way that is not desired. If  
you are careless, there is a risk of accidents, serious injuries and death.  
237  
Always stay attentive and do not rely solely on the system. The driver is always responsible for control of the  
vehicle.  
Note the system limitations of ACC ACC system limitations and Lane Assist Lane Assist system limitations .  
Always adapt your speed and distance to vehicles driving ahead based on the visual, weather, road, and traffic  
conditions.  
Always keep your hands on the steering wheel so that you are prepared to steer at any time.  
Take over steering immediately if a driver intervention prompt appears in the instrument cluster display or the  
deceleration by Travel Assist is not sufficient.  
Apply the brakes if the vehicle continues to roll unintentionally, e.g. after a driver intervention prompt.  
Operating Travel Assist  
Please read the introductory information and heed the Warnings and Notice   
Introduction.  
Fig. 118 Left side of the multi-function steering wheel (variant 1).  
238  
Fig. 119 Left side of the multi-function steering wheel (variant 2).  
Switching on and starting the regulation function  
1. During forward travel with ACC switched on, press the  
button on the multi-function steering wheel.  
The vehicle switches from ACC to Travel Assist.  
Depending on the driving situation, the vehicle switches to the following system status in Travel Assist:  
If ACC is regulating, Travel Assist maintains the current speed and the preset distance from the vehicle driving ahead  
(system status inactive).  
At the same time, the vehicle is kept in its lane by steering movements when road markings are detected (system status  
active).  
If ACC is not regulating, Travel Assist is switched on, but stays deactivated.  
1. Press the  
button.  
Travel Assist switches the driving situation accordingly to an active or inactive system status.  
The indicator/warning light corresponding to the driving situation comes on in the instrument cluster display. A notification is  
also displayed.  
Canceling the regulation function  
1. Press the  
button briefly.  
Or: Press the brake pedal.  
The set distance remains saved.  
Changing to ACC  
1. Press the  
button on the multi-function steering wheel.  
The vehicle switches from Travel Assist to the system status of ACC corresponding to the driving situation.  
Adjusting further settings  
239  
The further operation of Travel Assist corresponds to the operation of the ACC Adjusting the ACC settings.  
Troubleshooting  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
Travel Assist is not available or is not functioning as expected  
The yellow indicator light turns on. In addition, a message is shown in the instrument cluster display.  
There is a malfunction in the sensor system. Check the causes and troubleshooting measures described in the  
information on ACC and Lane Assist.  
Malfunction or fault. Stop the engine and restart.  
The system limitations are not adhered to.  
If the problem persists, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen  
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Take over the steering  
The white warning light will come on and a message will be shown in the instrument cluster display.  
You have let go of the steering wheel for a few seconds.  
1. Take hold of the steering wheel and take over steering the vehicle.  
Take over the steering immediately  
The red warning light will come on and a message will be shown in the instrument cluster display. An audible warning will  
sound or the steering wheel will vibrate, depending on the driving situation.  
You have let go of the steering wheel for a long period of time or the system limits have been reached.  
1. Immediately take hold of the steering wheel and take over steering the vehicle.  
Comfort drive Travel Assist switches off automatically  
Vehicles without Emergency Assist:  
You have let go of the steering wheel for a long period of time.  
Malfunction or fault. Stop the engine and restart.  
If the problem persists, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen  
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
The regulation function is canceled unexpectedly  
You have operated the turn signal.  
Semi-automatic vehicle control in a medical emergency (Emergency  
Assist)  
Introduction  
Emergency Assist can recognize driver  
inactivity and can automatically keep  
the vehicle in its lane and, if necessary,  
slow it down to a stop. The system can  
hereby actively help to avoid an  
accident or reduce the consequences of  
an accident.  
240