Get Driving data menu Guide for Volkswagen Taos SUV First Generation (2022-2025)

Cold range. The engine is not at operating temperature yet. Avoid high engine RPMs and heavy engine load when the

engine is not at operating temperature.

Normal range.

Warning range. The needle may move into the warning range when engine load is heavy, especially when outside

temperatures are high.

Fig. 18 In the Volkswagen Digital Cockpit Basic: coolant temperature gauge (general example).

Cold range. The engine is not at operating temperature yet. Avoid high engine RPMs and heavy engine load when the

engine is not at operating temperature.

Normal range.

Warning range. The needle may move into the warning range when engine load is heavy, especially when outside

temperatures are high.

If the

warning light ﬂashes, the coolant temperature is too high or the coolant level is too low ⇒ Troubleshooting.

Driving data menu

The driving data menu shows driving and consumption data. Depending on the vehicle equipment, various driving data can be

displayed. The displayed driving data is dependent on the current driving style, the vehicle status, e.g. particle ﬁlter

regeneration, and the current driving situation, e.g. city trafﬁc. The driving data is determined as an average value over

sections of different distances and the currently displayed value may therefore differ from the actual average value.

Since start memory

If the trip is interrupted for more than two hours, the memory is erased.

Since refuel memory

Display and memory of the collective driving and consumption data. The memory is erased when the vehicle is refueled.

Extended period memory

The memory collects the driving data up to 19 hours and 59 minutes or 99 hours and 59 minutes driving time or 1999.9 km

(miles) or 9999.9 km (miles) distance driven. If one of these maximum thresholds is met, the memory is erased. The

maximum thresholds may vary depending on the version of the instrument cluster.

Volkswagen Digital Cockpit Pro Driving Data Menu

The driving data is available in the context menu of the Volkswagen Digital Cockpit Pro.

Switching Between the Displays in the Volkswagen Digital Cockpit Pro

Vehicles with multi-function steering wheel:

1. Press the

button on the multi-function steering wheel.

Switching Memories in the Volkswagen Digital Cockpit Pro

Vehicles with multi-function steering wheel:

1. Press the

button on the multi-function steering wheel.

Deleting Driving Data Memories in the Volkswagen Digital Cockpit Pro

Vehicles with multi-function steering wheel:

1. Select the memory to be erased.

2. Press the

button on the multi-function steering wheel.

If you would like to know how many kilometers are driven in the course of a day, clear the Long-term memory before you

start driving and read it at the end of the day.

Adjustable Speed Warning

The following setting can be used to set an individual speed warning:

Vehicles with multi-function steering wheel:

1. Select the Warning at --- km/h or Warning at --- mph display.

2. Press the

button on the multi-function steering wheel to save the current speed and to activate the warning.

3. Set the speed on the multi-function steering wheel within approximately ﬁve seconds by pressing the

buttons. Then press the button or wait several seconds.

The speed will then be saved and the warning will be activated.

and

arrow

4. Press the

button again to deactivate.

The stored speed is erased.

The warning can be set for speeds between 30 km/h (18 mph) and 250 km/h (155 mph).

Depending on the country, a single warning tone sounds at speeds of over approximately 80 km/h (approximately 50 mph),

and from approximately 120 km/h (approximately 75 mph), a continuous warning tone sounds. The yellow indicator light

will also be displayed in the instrument cluster display. This warning is required by law and cannot be altered.

Volkswagen Digital Cockpit Basic Driving Data Menu

The driving data is available in the secondary display area of the Volkswagen Digital Cockpit Basic.

Selecting the Driving Data Menu in the Volkswagen Digital Cockpit Basic

Vehicles with multi-function steering wheel:

1. Select the right or left secondary display area using the

2. Select your preferred driving data menu using the and

3. Conﬁrm your selection with the button.

buttons.

arrow buttons.

Resetting the Driving Data Menu in the Volkswagen Digital Cockpit Basic

Vehicles with multi-function steering wheel:

1. Press the

button.

2. Select the corresponding driving data menu in the conﬁguration menu using the

An arrow behind the entry in the conﬁguration menu indicates a submenu.

and

arrow buttons.

3. In the submenu, select Reset data and conﬁrm by pressing the

button.

Driving Data in the Infotainment system

Driving Data can be displayed in the Infotainment system, in addition to being displayed in the instrument cluster.

Selecting Displays in the Infotainment System

You can select the driving data you would like to display using the vehicle settings in the Infotainment system ⇒ Vehicle

settings menu.

Consumption

The average fuel consumption is displayed after approximately 300 m (approx. 984 ft).

Range

This indicates the approximate distance in km (miles) the vehicle can travel under the same driving conditions.

Speed

The average speed is displayed after approximately 100 m (approximately 328 ft).

WARNING

If the driver is distracted while driving, accidents and serious injuries can occur. Operating the Volkswagen Digital Cockpit

and Infotainment system can distract you from trafﬁc.

Always drive attentively and responsibly.

Never operate the instrument cluster while driving.

Only adjust any settings in the instrument cluster or Infotainment system when the vehicle is stationary.

Service

Service menu

Depending on the equipment, settings can be applied in the service menu.

Opening the Service Menu in the Volkswagen Digital Cockpit Pro

1. Select the Range information proﬁle.

2. Press and hold the

button on the multifunction steering wheel for approximately four seconds.

3. Navigate in the menu using the buttons on the multi-function steering wheel.

Opening the Service Menu in the Volkswagen Digital Cockpit Basic

1. Select the Travel time/distance driven secondary display.

2. Press and hold the

seconds.

button on the multi-function steering wheel in the same direction for approximately six

3. Use the

and

arrow buttons to navigate the menu.

Resetting the service interval display

1. Select Service menu.

2. Follow the instructions in the instrument cluster display.

Resetting the oil change service

Driving data menu for Your Volkswagen Taos SUV First Generation (2022-2025)

Popular Owner Manuals

Latest Owner Manuals