Advertisement

Advertisement

Infotainment system -> Cleaning the screen for Your Volkswagen Taos SUV First Generation (2022-2025)

System settings  
The system settings may include the following functions, information, and setting options:  
Screen.  
Time and date.  
Language.  
Additional keyboard languages.  
Units.  
Voice control.  
Wi-Fi®.  
Data connection.  
Manage mobile devices.  
Restore factory settings.  
System information.  
Copyright.  
Configuration assistant.  
Opening system settings  
1. Tap MENU Setup.  
Sound settings  
The sound settings may include information and setting options for equalizer, position, volume and setup.  
Opening sound settings  
1. Tap MENU Sound.  
Adjusting the volume of external audio sources  
Lower the volume of the Infotainment system before turning up the volume of an external audio source.  
If the connected audio source plays too quietly, increase the output volume of the external audio source. If that does not  
correct the problem, set the input volume to Medium or Maximum.  
If the connected external audio source plays too loudly or the sound is distorted, lower the output volume of the external audio  
source. If that does not correct the problem, set the input volume to Medium or Quiet.  
Cleaning the screen  
Refer to  
and Safety instructions.  
When cleaning the screen, please note this checklist:  
The Infotainment system is switched off.  
Use a soft, clean cloth that has been moistened with water.  
Or: use a cleaning cloth which is available from an authorized Volkswagen dealer or authorized Volkswagen Service  
Facility.  
For stubborn dirt:  
NOTICE  
If the screen is cleaned with incorrect cleaning agents or when dry, it may be damaged.  
303  
Only apply gentle pressure.  
Do not use any aggressive cleaners or products which contain solvents. These types of cleaners can damage the  
device and cause glare on the screen.  
NOTICE  
If the cloth used to clean the screen is too moist, the screen can no longer be operated or switched off.  
Dry the screen and then leave the vehicle locked from the outside for at least two minutes.  
Radio  
Introduction  
In radio mode, you can receive available radio stations available via various reception modes and save your favorites to  
enable quick access.  
Available reception modes depend on the vehicle equipment and are not available in all countries. Reception modes may be  
discontinued, switched off or no longer offered in individual countries.  
In some countries, depending on the vehicle equipment, you can also use Internet Radio Online Functions.  
The radio stations are responsible for transmitted content.  
Other electrical devices connected in the vehicle can impair radio signal reception and cause noise in the speakers.  
Decals or metal-coated stickers on the vehicle windows can impair radio reception in vehicles with window antennas.  
Function descriptions  
Refer to ⇒  
and Safety instructions.  
Selecting a Reception Mode  
Various stations are available, depending on the reception mode. The available reception modes depend on the vehicle  
equipment and are not available in all countries.  
1. To open the list of reception modes, tap Source.  
2. Select a reception mode, e.g. FM.  
Searching For and Selecting a Station  
You can search for and select stations in a variety of ways. The options vary based on the reception mode.  
Searching for a Station in SCAN mode  
In SCAN mode, the stations in the frequency band are set automatically in succession and played for approx. 5 seconds each  
1. To start SCAN mode, tap  
or  
SCAN, depending on the vehicle equipment.  
SCAN mode starts and the current station is shown on the display.  
The SCAN function key is shown.  
2. To select a station, tap SCAN.  
SCAN mode stops and the station is tuned.  
Selecting a Station Using the Multi-function Steering Wheel  
304