Advertisement

Advertisement

Seats and head restraints -> Rear seats for Your Volkswagen Taos SUV First Generation (2022-2025)

The power front seats can also be adjusted when the ignition is switched off. Never leave children or people  
requiring assistance in the vehicle.  
In case of an emergency, interrupt the power adjustment by pressing another switch.  
NOTICE  
Incorrect usage may damage the electric components in the front seats.  
Do not kneel on the front seats and do not otherwise concentrate pressure on specific points of the seat cushion  
and backrest.  
If the charge level of the 12-volt vehicle battery is too low, it may not be possible to adjust the seat electronically.  
Seat adjustment is canceled while the engine is starting.  
Rear seats  
Introduction  
The following information describes the various options for adjusting the rear seats. Always make sure the seats are adjusted  
to the correct position Correct seating position.  
WARNING  
Incorrectly positioned rear seats increase the risk of serious injuries if an accident occurs.  
Before every journey, ensure that the rear seats are positioned so that all passengers are sitting upright and have  
their safety belts fastened correctly.  
Only adjust the rear seats when there is no one within the range of movement of the seats.  
WARNING  
If you adjust the rear seats while driving, you will adopt the wrong sitting position. In addition, the rear seats may move  
unexpectedly during the journey. This will increase the risk of serious injuries if an accident occurs.  
Only adjust the rear seats when the vehicle is stationary.  
WARNING  
Lighters in the vehicle can become damaged or ignite unintentionally. This can cause severe burns and vehicle damage.  
Before adjusting any seat, always make sure that there are no cigarette lighters near the moving parts of the seat.  
WARNING  
Incorrect use of the rear center armrest may cause serious injuries.  
The rear center armrest must always be folded up during journeys.  
If the center armrest is folded down, the center rear bench seat must never be used by either adults or children.  
124  
Never allow an adult or child to ride on the center armrest.  
NOTICE  
Objects in the luggage compartment may get into the space between the seat and the luggage compartment floor when  
the rear seat is adjusted. This may cause damage.  
Remove all objects located between the seat and luggage compartment floor before you move the rear seat.  
NOTICE  
Objects with sharp edges can damage the seats.  
Never touch the seats with sharp-edged objects. Sharp-edged objects, such as zippers, rivets on clothing, or belts,  
can cause surface damage. Open hook and loop fasteners can also cause damage.  
Folding the rear bench seat backrest forward or backward  
Please read the introductory information and heed the Warnings and Notice   
and Introduction.  
The seat backrest is divided. Each part of the rear seat backrest can be folded forward individually to enlarge the luggage  
compartment.  
Folding the rear seat backrest forward and down with the release button  
Fig. 68 In the rear seat backrest: release button.  
1. Move the head restraints all the way down.  
2. Pull the release button fig. 68 forward while folding the rear seat backrest forward and down.  
The corresponding backrest part of the rear seat backrest is released when the red marking fig. 68 can be seen.  
125  
Folding the rear seat backrest up and back  
1. Fold the rear seat backrest to the back and push firmly into the catch until it securely engages ⇒  
.
The red marking fig. 68 must no longer be visible.  
WARNING  
Folding and unfolding the rear seat backrest in an uncontrolled or careless manner may cause severe injury.  
Always take care that no people or animals are in the way of the rear seat backrest when folding it forward and  
down.  
Never fold the rear seat backrest forward or back while driving.  
Make sure the safety belt is not pinched or damaged when folding the rear seat backrest back.  
Keep hands, fingers, feet and other body parts away from the rear seat backrest when folding forward or back.  
Each rear seat backrest must always be securely engaged to ensure that the safety belts in the rear seats can  
provide the maximum protection. Take extra care especially with the middle seat in the rear bench seat. If a seat on  
the rear bench is used without the rear seat backrest being engaged, the vehicle occupant will move forward with  
the rear seat backrest in the event of sudden braking and driving maneuvers or a collision.  
A red marking fig. 68 indicates that the rear seat backrest is not engaged. Always check that the red marker is not  
visible when the rear seat backrest is in the upright position.  
Never allow people to sit in a rear seat if that rear seat backrest is folded forward or is not engaged.  
NOTICE  
Folding and unfolding the rear seat backrest in an uncontrolled or careless manner may cause damage to the vehicle or  
other objects.  
Before folding the rear seat backrest forward, always adjust the front seats so that the head restraint or padding on  
the rear seat backrest does not press against the front seats.  
Before folding the rear seat backrest forward, always take care that there are no objects in its path.  
Head restraints  
Introduction  
The information that follows describes how the head restraints can be adjusted and removed. Always make sure the seats are  
adjusted to the correct position Correct seating position.  
All seats are equipped with head restraints. The head restraints are specially approved for the relevant seat and should not be  
installed in another seat in the vehicle.  
If a seat is occupied, select the correct head restraint setting for the respective head restraint. If a seat is not occupied, the  
respective head restraint can be pushed down as far as it will go.  
The center rear head restraint (depending on the vehicle equipment) is only intended for the center seat on the rear bench  
seat. Therefore do not install this head restraint in any other position.  
There are notches in the head restraint supports so that they can be locked in different positions. Only head restraints which  
are correctly mounted can lock into the notches within the adjustable range. To prevent the head restraints from being  
removed unintentionally after mounting, there are stops at the top and bottom of the adjustable range.  
Correct head restraint adjustment  
126