Advertisement

Advertisement

Technical data -> Information on technical data for Your Volkswagen Taos SUV First Generation (2022-2025)

Technical data  
Information on technical data  
General information about specifications  
As long as nothing else is specified or listed, the technical data applies to the base model. Different values may result due to  
optional equipment, different model versions, special equipment, and country-specific equipment. The specifications in the  
legal vehicle documents always take precedence.  
The drive and power of the vehicle are listed in the official vehicle registration.  
Weight  
The values for the curb weight in the following tables apply to a vehicle ready for operation with standard equipment, without a  
driver, with fluids including 100% full fuel tank. Optional equipment and retrofitted equipment will increase the specified curb  
weight and reduce the possible load.  
The load consists of the following weight:  
Passengers.  
All luggage inside and outside the vehicle.  
Attachments.  
The permitted total vehicle weight and the gross axle weight rating must never be exceeded. The permissible values are  
indicated on the safety compliance label or on the identification label on the B-pillar on the driver's side Safety  
certificate Identification label.  
Performance  
The performance was determined without equipment that limits performance, such as add-on parts.  
Due to technical or legal reasons, the performance specifications and mileage may vary.  
On some engines with heavy duty suspension, the speed maximum speed may be limited and lower.  
Incline angle  
The incline angle is the specification up to which the vehicle is able to drive uphill on an angle with its own power. This can  
depend on the road conditions, the weather conditions, and the engine power, among other things. The values apply to a  
vehicle that is in motion and not to a vehicle that starts to drive form a stationary position.  
A rising difference in altitude (incline) on a 100 m (approx. 300 ft) stretch is given in percentage or degrees (100% =  
45 degrees).  
Vehicle Identification Number (VIN)  
Structure of the vehicle identification number (VIN)  
The vehicle identification number (VIN, VIN) consists of 17 characters. These characters can be sorted into seven groups.  
The structure is explained using the following examples of vehicle identification numbers.  
Group  
1
Position  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
7
473  
Group  
W
W
V
V
W
W
Z
A
Z
F
Z
2
C
9
B
N
Z
4
M
8
E
Y
4
0
0
0
0
0
9
0
5
0
3
1
Example  
Vehicle manufacturer identification:  
WVW  
WVG  
1VW  
3VW  
XW8  
MFB  
Volkswagen Passenger Vehicles  
Volkswagen Passenger Vehicles  
Volkswagen Group of America Inc., Volkswagen de México, S.A. de C.V  
Volkswagen de México, S.A. de C.V  
LLC Volkswagen Group Rus (Volkswagen/Skoda Kaluga)  
Garuda Matraman Motor (Indonesia)  
Filler characters: The filler characters may vary depending on manufacturer, or contain information on the body shape and  
transmission type.  
Vehicle class, depending on model:  
14  
ID.7  
3H  
5T  
Arteon  
Touran  
Polo  
6R  
AC  
BV  
CB  
CA  
RC  
T-Roc convertible  
Golf  
Passat  
Atlas  
Touareg  
Depending on the manufacturer, digits 7 to 9 can also contain information on the fuel type (7) and vehicle class (8 and 9).  
Filler characters or check digits: The filler characters or check digits may vary depending on the manufacturer.  
VIN index, depending on model year:  
P
R
S
T
2023  
2024  
2025  
2026  
2027  
U
Production location, plant where the vehicle was manufactured:  
Volkswagen plant in Chattanooga  
C
D
Volkswagen plant in Bratislava  
474  
E
K
Volkswagen plant in Emden  
Volkswagen plant in Osnabrück  
Or: Volkswagen plant in Kaluga  
M
P
T
Volkswagen plant in Puebla  
Volkswagen plant in Zwickau  
Volkswagen plant in Pune  
U
V
W
Y
Volkswagen plant in Uitenhage  
Volkswagen plant in Palmela  
Volkswagen plant in Wolfsburg  
Volkswagen plant in Pamplona  
The letter assignment for the production site may vary depending on the vehicle or be assigned twice.  
Sequential production number for each model year.  
Position of the vehicle identification number  
Fig. 194 In the windshield: vehicle identification number (VIN)  
The VIN can be read from the outside through the viewing window in the windshield. The viewing window is at the side of the  
lower section of the windshield.  
In some models, it may be possible to display the VIN in the Service menu or in the vehicle settings, depending on the  
475  
Infotainment system. The vehicle identification number may also be located on the identification label.  
The VIN may also be stamped in the following locations, depending on the model, country and engine:  
In the right water drain channel in the engine/motor compartment  
On the right suspension strut tower in the engine/motor compartment  
In the engine compartment near the hinge for the hood on the right side of the vehicle.  
Under the carpet behind the right front seat  
Identification label  
Fig. 195 Identification label (general example): version 1.  
Depending on the country, the type approval number, such as the EU operating license, may be specified.  
Manufacturer code.  
Type approval.  
Vehicle Identification number.  
Gross Vehicle Weight Rating.  
Gross combination weight rating (towing vehicle and trailer).  
Front Gross Axle Weight Rating.  
Rear Gross Axle Weight Rating.  
Type approval number, differs according to country.  
Vehicle model  
Manufacturer's address.  
Engine code.  
476  
Fig. 196 Identification label (general example): version 2.  
Depending on the country, the type approval number, such as the EU operating license, may be specified.  
Manufacturer code.  
Type approval.  
Vehicle Identification number.  
Gross Vehicle Weight Rating.  
Gross combination weight rating (towing vehicle and trailer).  
Front Gross Axle Weight Rating.  
Rear Gross Axle Weight Rating.  
Depending on the country and model, the model plate may be visible in the lower section of the door pillar when the driver’s fo  
front passenger door is open. Vehicles exported to some countries do not have a model plate.  
Safety certificate  
477  
Fig. 197 Safety certificate (general example).  
Fig. 198 Safety certificate (general example).  
A safety certificate on the driver door pillar displays the following information:  
Manufacturer.  
Country of manufacture.  
Date of manufacture.  
478  
Gross vehicle weight rating.  
Gross axle weight ratings.  
Tire size.  
Rim size  
Tire pressure.  
Vehicle Identification number.  
Type designation.  
Dimensions  
Fig. 199 Vehicle dimensions.  
The information in the table applies for the standard model with standard equipment.  
For other wheel rims, tire sizes, options, differing model designs and retrofitted accessories, as well as special vehicles and  
vehicles in other countries, these values can differ.  
Information about how the weight specifications are compiled can be found in section General information about  
specifications.  
Where the vehicle dimensions are not given, the values were not available at the time of printing.  
Front-wheel drive  
Key for fig. 199:  
479  
Key for fig. 199:  
1
5
7
2
(
mm  
(in)  
Front track  
Rear track  
Width  
6
1
.
9
)
1
5
3
7
(
mm  
(in)  
6
0
.
5
)
1
8
4
1
(
mm  
(in)  
7
2
.
5
)
2
0
9
7
(
mm  
(in)  
Width from outside mirror to outside mirror  
8
2
.
6
)
480  
Key for fig. 199:  
1
6
3
6
(
mm  
(in)  
Height at curb weight  
6
4
.
4
)
1
7
5
0
(
mm  
(in)  
Height with open hood and curb weight  
6
8
.
9
)
2
0
9
0
(
mm  
(in)  
Height with open trunk lid and curb weight  
8
2
.
3
)
1
6
2
(
mm  
(in)  
Ground clearance at curb weight between the axles  
6
.
4
)
481  
Key for fig. 199:  
2
6
8
9
(
mm  
(in)  
Wheelbase at full load  
1
0
5
.
9
)
m
Minimum turning circle diameter  
(ft)  
4
4
6
6
(
mm  
(in)  
Length from bumper to bumper  
1
7
5
.
8
)
All-wheel drive (4MOTION)  
Key for fig. 199:  
1
5
6
9
(
mm  
(in)  
Front track  
6
1
.
8
)
482  
Key for fig. 199:  
1
5
4
4
(
mm  
(in)  
Rear track  
6
0
.
8
)
1
8
4
1
(
mm  
(in)  
Width  
7
2
.
5
)
2
0
9
7
(
mm  
(in)  
Width from outside mirror to outside mirror  
8
2
.
6
)
1
6
5
4
(
mm  
(in)  
Height at curb weight  
6
5
.
1
)
483  
Key for fig. 199:  
1
7
8
2
(
mm  
(in)  
Height with open hood and curb weight  
7
0
.
2
)
2
1
0
6
(
mm  
(in)  
Height with open trunk lid and curb weight  
8
2
.
9
)
1
9
3
(
mm  
(in)  
Ground clearance at curb weight between the axles  
7
.
6
)
2
6
8
0
(
mm  
(in)  
Wheelbase at full load  
1
0
5
.
5
)
m
Minimum turning circle diameter  
(ft)  
484  
Key for fig. 199:  
4
4
6
6
(
mm  
(in)  
Length from bumper to bumper  
1
7
5
.
8
)
Tank capacities  
The fuel tank has the following volume:  
approx. 50 l (13.2 gal)  
14.5 gallons (approximately 55 l) for all-wheel drive vehicles  
The capacity of the fuel tank includes an indeterminate reserve quantity that remains in the fuel tank when the fuel gage  
shows that the fuel tank is empty. The reserve quantity is variable and cannot reliably serve to increase the remaining range.  
Gasoline engines  
1.5 l, 4 cylinder, TSI®, 118 kW (158 hp), gasoline engine  
Engine overview  
kW  
hp  
118 at 5500 rpm  
158 at 5500 rpm  
Output  
Engine code (EC)  
Maximum torque  
DNKA  
Nm  
ft-lb  
250 at 1750 – 4000 rpm  
184 at 1750 – 4000 rpm  
D
S
G
®
7
4
Transmission  
AG8  
M
O
T
I
O
N
km/h  
485  
Maximum speed  
mph  
Weight specifications and axle loads  
D
S
G
®
7
4
Transmission  
AG8  
M
O
T
I
O
N
1
5
5
6
1
5
5
7
kg  
1443 – 1445  
Curb weight  
3
4
3
0
3
4
3
3
lbs  
3181 – 3186  
2
1
0
0
kg  
lbs  
kg  
1970  
4343  
1040  
Gross Vehicle Weight Rating  
4
6
3
0
1
0
8
0
Front Gross Axle Weight Rating  
486  
2
3
8
1
lbs  
2293  
1
0
7
0
kg  
980  
Rear Gross Axle Weight Rating  
2
3
5
9
lbs  
2161  
4) This data was not available at the time of printing.  
487  
Abbreviations used  
AbbreviationMeaning  
488  

Related Topics