Get Transporting -> Luggage compartment floor Guide for Volkswagen Taos SUV First Generation (2022-2025)

Fig. 136 In the luggage compartment: installing and removing the luggage compartment cover (general example).

Removing the luggage compartment cover

1. Unhook the top retaining straps from the trunk lid ﬁg. 136 (upper arrows).

2. Push the luggage compartment cover out of the side holders from below ﬁg. 136 (lower arrows).

Installing the luggage compartment cover

1. Press the luggage compartment cover into the side holders in the luggage compartment ﬁg. 136 (lower arrows).

2. Hook the retaining straps onto the trunk lid ﬁg. 136 (upper arrows).

Storing the luggage compartment cover

Depending on the equipment, the removed luggage compartment cover can be stored below the variable luggage

compartment ﬂoor. To do so, the luggage compartment cover must be turned over.

Luggage compartment ﬂoor

Opening and closing the luggage compartment ﬂoor

333

Fig. 137 In the luggage compartment: opening the luggage compartment floor.

Opening the luggage compartment ﬂoor

1. Grasp the opening or tab in the luggage compartment ﬂoor ﬁg. 137 (arrow) and lift the luggage compartment ﬂoor.

Closing the luggage compartment ﬂoor

1. Carefully lay down the luggage compartment ﬂoor in the original position.

NOTICE

Improper use may damage the luggage compartment ﬂoor or the luggage compartment trim.

When closing the luggage compartment ﬂoor, always carefully guide it downward, and do not drop it.

Always distribute loads as evenly as possible across the entire luggage compartment ﬂoor to avoid concentrating

the load in a single place.

Luggage compartment features

Tie-downs

334

Transporting -> Luggage compartment floor for Your Volkswagen Taos SUV First Generation (2022-2025)