Get Child seats -> Securing a child seat with ISOFIX/i-Size Guide for Volkswagen Tayron SUV First Generation (2018-2025)

The seat has two rigid attachment arms. The attachment arms click into ISOFIX retaining rings between the seat cushion and the

backrest (→ Child seat with ISOFIX or i-Size). A top tether or a support foot may sometimes have to be used in addition to the ISOFIX

anchor points described above.

—

: it is better to secure child seats using the ISOFIX system, if available, rather than with a three-point

automatic seat belt (→ Child seat with seat belt).

Additional securing points:

—

: the strap at the top of the child seat is routed over the backrest and hooked to an anchor point located on the back of the

rear seats and front passenger seat (→ Child seat with top tether). Top tether anchor points are marked with an anchor symbol.

: some child seats are supported by a support foot resting on the floor of the vehicle. This support foot helps prevent

the child seat tipping forward in a crash. Child seats with a support foot can only be used on the front passenger seat and the outer

—

rear seats →

Recommended child seat securing systems

Volkswagen recommends that child seats are secured as follows:

—

—ISOFIX/i-Size and top tether.

—ISOFIX/i-Size and support foot.

—ISOFIX/i-Size and top tether.

—ISOFIX/i-Size and support foot.

—ISOFIX/i-Size and, if applicable, top tether.

—ISOFIX/i-Size and, if applicable, support foot.

WARNING

Unsecured or inadequately secured children can suffer serious or fatal injuries in the event of a sudden driving or braking manoeuvre

and in an accident.

● Observe the specifications of the child seat manufacturer when installing the child seat in the vehicle and securing the child in the

child seat.

● Do not use child seats that must be secured in the vehicle with lower tethers according to the child seat manufacturer’s

instructions.

WARNING

Incorrect use of the support foot can cause severe or fatal injuries.

● Ensure that the support foot is always correctly and safely installed.

● Always read and follow the installation instructions and warning information provided by the child seat manufacturer.

● Do not transport children in child seats with a support foot if the weight of the child seat, including the child, exceeds a total

weight of 33 kg (around 73 lbs).

WARNING

Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no

circumstances are they to be used for adult seatbelts, harnesses, or for attaching other items or equipment to the vehicle.

Quick guide to ISOFIX and i-Size installation

The identification marking of the ISOFIX or i-Size anchor points is equipment and country dependent.

I-Size anchor points are not available on the front passenger seat in some countries.

The following table shows the installation options for ISOFIX or i-Size child seats at the ISOFIX or i-Size anchor points of the individual

seats.

Front passenger seat

Front passenger

front airbag

activated

deactivated

: up to 10 kg

: up to 13 kg

Rear-facing

E/R1

D/R2

C/R3

D/R2

C/R3

B/F2

IL-SU

Rear-facing

Front-facing

IL-SU

: 9 to 18 kg

IL-SU,

IUF

B1/F2X

A/F3

IL-SU, IUF

: 15 to 25 kg

: 22 to 36 kg

Front-facing

Rear-facing

Front-facing

–

IL-SU

i-U

–

–/R2

i-U

–/B2, F2X

–/B2, B3

i-U

i-B

—

: the size class shown corresponds to the permissible weight range of the child using the seat. The size class is indicated on

the ECE approval label for child seats with “universal” or “semi-universal” approval. A size class indication is affixed to the child seat.

— : seat not suitable for securing an ISOFIX or i-Size child seat in this group.

—

: seat suitable for installing an ISOFIX child seat with “semi-universal” approval. Refer to the vehicle list supplied by the child

seat manufacturer.

—

: seat suitable for installing an ISOFIX child seat with “universal” approval.

: seat suitable for installing a front-facing or rear-facing i-Size child seat with “universal” approval.

: seat suitable for installing a front-facing i-Size child seat with “universal” approval.

: seat suitable for installing a front-facing ISOFIX booster seat of Group 2/3 as well as a front-facing i-Size child seat for children

with a height of 100 to 150 cm (around 3 ft 3 in to 4 ft 11 in).

Installing child seats with ISOFIX or i-Size

The location of the bottom anchor points is indicated by either an ISOFIX or i-Size symbol.

Markings identifying the ISOFIX anchor points for child seats on the rear seats.

Markings identifying the i-Size anchor points for child seats on the rear seats and on the front passenger seat.

Fitting a child seat with attachment arms (illustration).

1. Observe the instructions (→ Child seats).

2. When using child seats of groups 0, 0+ or 1 and i-Size child seats for children up to a height of 105 cm (around 3 ft 5 in) on the

rear bench seat, push the rear bench seat back as far as possible (→ Rear bench seat).

3. When using child seats of group 2/3 and i-Size child seats for children from a height of 100 cm (around 3 ft 3 in) on the rear

bench seat, push the rear bench seat to a middle position (→ Rear bench seat).

4. If necessary, fold down any protective caps that are fitted on the ISOFIX or i-Size anchor points.

5. Push the attachment arms of the child seat in the direction of the arrow onto the ISOFIX or i-Size anchorages → Fig. 1. The child

seat must click and audibly securely into place.

6. Perform a pull test on both sides of the child seat to make sure that the child seat is properly engaged.

If the child seat is fitted with a support foot, the foot must stand firmly on the floor of the vehicle.

On the rear of the rear seats: top tether anchor points for top

tether.

Child seats -> Securing a child seat with ISOFIX/i-Size for Your Volkswagen Tayron SUV First Generation (2018-2025)

Related Topics

Child seats

Popular Owner Manuals

Latest Owner Manuals