Get Driver assist systems -> Speed warning Guide for Volkswagen Tayron SUV First Generation (2018-2025)

Function conditions

The speed warning function warns at speeds above around 20 km/h (around 12 mph).

Switching on and off

Depending on the country, the speed warning is always switched on when the engine is started. If required, you can switch off the

speed warning manually in the Infotainment system.

1. Open the Assist systems menu.

2. Switch the speed warning on or off in the corresponding submenu.

Activating and deactivating the acoustic warning

In the Infotainment system:

1. Open the Assist systems menu.

2. Tap Speed warning.

3. Activate or deactivate the acoustic warning in the corresponding option.

The acoustic warning is always activated when the engine is started.

Adjusting the warning threshold

You can adjust the warning thresholds of the speed warning function manually.

In the Infotainment system:

1. Open the Assist systems menu.

2. Tap Speed warning.

3. To select the level for the warning thresholds, tap

in the Warning threshold menu option.

When the engine is started, the warning thresholds of the speed warning are always reset to the default value.

Activating and deactivating the change tone

The change tone informs the driver acoustically about a change in the speed limits. You can switch off the change tone manually if

required.

In the Infotainment system:

1. Open the Assist systems menu.

2. Tap Speed warning.

3. Activate or deactivate the change tone in the corresponding option.

Hiding fault messages via the multifunction steering wheel

1. Press the

button on the multifunction steering wheel.

Trailer mode

In vehicles with a factory-fitted towing bracket and a trailer with an electrical connection to the vehicle, the display of road signs that

may apply to the vehicle when towing a trailer, e.g. applicable speed limits and no-overtaking signs, can be activated or deactivated in

the vehicle settings menu in the Infotainment system.

In trailer mode, display of the valid speed limits can be adjusted to the type of trailer and to country-specific legal requirements.

In the Infotainment system:

1. Open the Assist systems menu.

2. Tap Trailer detection.

3. To adapt the warning threshold specifically for trailer mode, tap

in the Warning when exceeding menu option.

If the system detects that the maximum permitted speed has been exceeded, it shows this visually on the instrument cluster display by

a flashing speed limit detected by the system and, depending on setting, also issues an acoustic warning. A warning is issued in two

warning levels.

On the instrument cluster display: detected violation of

maximum permitted speed (illustration).

Speed warning – Level 1

Violation of maximum permitted speed detected.

The speed limit detected by the system flashes continuously in the instrument cluster and, depending on equipment, in the head-up

display → Fig. 1.

Speed warning – Level 2

Progressive violation of maximum permitted speed detected.

An acoustic warning sounds. The speed limit detected by the system flashes continuously in the instrument cluster and, depending on

equipment, in the head-up display → Fig. 1.

The second warning level is triggered if the speed continues to increase above the speed limit.

The second warning level is cancelled again when the driver actively slows down.

Advanced Road Sign Display is outside the operating region

An acoustic warning sounds. A text message is displayed on the instrument cluster display and in the Vehicle status menu.

—No data available for this region. The Advanced Road Sign Display system is not supported in the country in which you are currently

travelling.

Advanced Road Sign Display is not available

An acoustic warning sounds. A yellow indicator lamp is displayed on the instrument cluster display in combination with the yellow

central warning lamp. A text message is also displayed on the instrument cluster display and in the Vehicle status menu.

—The windscreen is dirty in the area of the camera or the camera view is impaired due to the weather conditions. Clean the

windscreen (→ Vehicle care).

—The view of the camera is impaired by add-on parts or stickers. Keep the area around the camera window free (→ Accessories and

replacement parts).

—The camera has been displaced or damaged, e.g. due to damage to the windscreen. Check whether damage is visible (→ Accessories

and replacement parts).

—The camera was deactivated automatically due to a high ambient temperature or prolonged exposure to direct sunlight. When the

camera is available again, the Advanced Road Sign Display system will also be available once more. Switch off and restart the

engine.

—Fault or malfunction. Switch off and restart the engine.

— If the problem persists, go to a suitably qualified workshop. Volkswagen recommends using an authorised Volkswagen repairer.

Advanced Road Sign Display is partially deactivated

A white indicator lamp is shown in the instrument cluster display for 10 seconds.

The default settings for the speed warning have been changed:

—Check whether the speed warning is deactivated (→ Advanced Road Sign Display).

—Check whether the acoustic warning is activated (→ Advanced Road Sign Display).

—Check whether the default warning threshold has been changed (→ Advanced Road Sign Display).

Driver assist systems -> Speed warning for Your Volkswagen Tayron SUV First Generation (2018-2025)

Related Topics

Driver assist systems

Popular Owner Manuals

Latest Owner Manuals