Advertisement

Advertisement

Heating and air conditioning system -> Seat heating and seat ventilation for Your Volkswagen Tayron SUV First Generation (2018-2025)

The front seats may be equipped either with seat heating or seat heating and seat ventilation. The outer rear seats may be equipped  
with seat heating →  
.
The seat ventilation function ventilates the seat with the air from the vehicle interior. The moisture from the body is removed. There is  
no direct cooling of the seat.  
The seat heating and seat ventilation work when the engine is running.  
Heating and ventilation settings  
The operating states of the seat heating and seat ventilation are shown in red and blue in the Infotainment system.  
Seat heating switched off.  
Seat heating switched on at highest temperature setting.  
Seat ventilation switched off.  
Seat ventilation switched on at highest ventilation setting.  
When should the seat heating and seat ventilation be switched off?  
Switch off the seat heating and seat ventilation if one of the following conditions applies:  
A person with reduced sensitivity to pain or temperature is sitting on the seat →  
The seat is not occupied.  
.
A child seat is installed on the seat.  
Objects are covering the seat cushion, e.g. protective covers, jackets, blankets or bags.  
The seat cushion is damp or wet.  
Seat heating only: The temperature in the vehicle interior or the outside temperature is above +25°C (+77 °F).  
WARNING  
Magnetic fields are produced during operation of the seat heating. In isolated cases, these magnetic fields can affect active medical  
implants, e.g. pacemakers.  
If you have a medical implant, you should consult your doctor or the implant manufacturer before operating the seat heating.  
Also make the other vehicle occupants aware of this.  
WARNING  
Anyone experiencing reduced sensitivity to pain or temperature due to medication, paralysis or chronic illness (e.g. diabetes) can  
sustain burns or cold injuries on their back, buttocks and legs when using the seat heating or seat ventilation. These injuries may take  
a long time to heal, or may never heal fully.  
Never use the seat heating and seat ventilation if you have reduced sensitivity to pain or temperature and leave the “Automatic  
seat air conditioning at the start of a journey” function switched off (→ Seat climate control).  
Consult a doctor if you have questions about your own state of health.  
WARNING  
Wet seat covers can cause a malfunctions in the seat heating and increase the risk of burns.  
Ensure that the seat cushion is dry before using the seat heating.  
Do not sit on the seat in wet clothing.  
Do not place any wet objects or items of clothing on the seat.  
Do not spill any liquids on the seat.  
NOTICE  
The heater elements of the seat heating can be damaged by point loads and insulating materials.  
Do not kneel on the seats and do not apply any other point loads to the seat cushion and backrest.  
Do not load the seat cushion and backrest with pointed objects.  
Switch off the seat heating if insulating materials are fitted on the seat, e.g. a protective cover or child seat.  
Use the seat heating only if the seat is equipped with the original seat covers.  
If odours develop, switch off the seat heating immediately and have it checked by a suitably qualified workshop. Volkswagen  
recommends using an authorised Volkswagen repairer.  
1. Tap  
or  
at the bottom of the screen to switch on the seat heating or seat ventilation with the highest temperature or  
ventilation setting.  
2. Tap  
or  
repeatedly to adjust the temperature or ventilation setting.  
3. To switch off the seat heating or seat ventilation, tap  
or  
repeatedly until  
or  
is displayed.  
: to switch the seat heating on or off, tap the touch sliders under the Infotainment system on the driver or front passenger side  
with two fingers.  
To save fuel, switch off the seat heating and seat ventilation as soon as possible.  
Seat heating and seat ventilation switch on and off automatically  
The most recent temperature or ventilation setting for the driver seat is switched on automatically if you start the engine again within  
approximately 10 minutes. If the front passenger seat is occupied, the most recent temperature or ventilation setting for the front  
passenger seat is also switched on automatically.  
If the front passenger leaves the seat when the seat heating and seat ventilation are switched on and the engine is running, the seat  
heating and seat ventilation of the front passenger seat will be switched off automatically. The display on the Infotainment system will  
change to or after around 2 seconds. If the front passenger returns to the seat when the engine is still running, the seat heating  
and seat ventilation of the front passenger seat will be switched on again automatically.  
Adjusting the intensity distribution  
You can adjust the intensity of the seat heating and seat ventilation separately for the seat and the seat cushion if, for example, you  
wish to heat or ventilate the backrest of the driver’s seat less than the seat cushion.  
1. Open the Seats menu in the app overview.  
2. Open the Settings submenu.  
3. Select the Seat air conditioning settings menu.  
4. Select the driver side or front passenger side.  
5. Adjust the intensity of the seat heating or seat ventilation using the sliders for the seat cushion and backrest.