Get Park Assist Plus with memory function Guide for Volkswagen Tayron SUV First Generation (2018-2025)

Park Assist Plus with memory function provides assistance when parking in frequently used parking spaces, such as garages and

driveways. The vehicle manoeuvres automatically on a previously stored route to the parking space.

Function

Park Assist Plus with memory function is an extension of Park Assist Plus.

The parking system uses the front camera to detect the surrounding area and stores the path into the parking space, with a maximum

distance of about 50 m (about 164 ft). Once the parking procedure has been stored in the Infotainment system, the vehicle can drive

the route to or from the parking space automatically.

The driver must always monitor the area around the vehicle →

.

An automatic braking intervention can occur if there are obstacles in the vehicle’s path or if a hazardous situation occurs (→ Automatic

braking intervention).

Automatic, hands-free parking with Park Assist Plus with memory function may be prohibited or restricted in some regions.

Only use Park Assist Plus with memory function if this is permitted by the legal requirements.

Prerequisites

GPS coordinates are available for the vehicle position.

Sufficient space to manoeuvre. The vehicle may first drive a few metres to the programmed path.

Driving with a trailer

Park Assist Plus with memory function cannot be activated if a trailer is electrically connected to the vehicle.

Park Assist Plus with memory function must be deactivated manually in the case of non-factory-fitted towing brackets.

WARNING

Park Assist Plus with memory function cannot replace the driver's full attention and works exclusively within the system limits. Park

Assist Plus with memory function cannot detect all driving situations and may not react at all, react too late or react undesirably. If

you do not pay due attention, there is a risk of accidents and serious or even fatal injuries.

● Always pay due attention and do not rely exclusively on the system. The driver is always responsible for all driving tasks.

● Use the foot brake to slow the vehicle in a hazardous situation.

● Only park the vehicle if you hold a valid driving licence.

● Observe the road traffic regulations of the respective country.

● Do not leave the driver seat during the parking manoeuvre.

● Do not use Park Assist with memory function for parking spaces without structural boundaries, e.g. close to the edge of bodies of

water or close to slopes without any structural separation.

WARNING

The system can respond only to a limited extent to quickly changing external conditions. This can result in collisions with other road

users and can lead to vehicle damage as well as serious or fatal injuries.

● Do not use the parking system in fast-moving traffic.

● Always observe at least one vehicle length from junctions.

● Do not perform a parking procedure when facing oncoming traffic or across several lanes.

WARNING

The vehicle can swing out or move into the path of oncoming traffic during the automatic parking procedure. This can result in

accidents with vehicle damage and serious or fatal injuries.

● Pay careful attention to the parking procedure and the traffic around you and brake the vehicle if necessary.

WARNING

In slippery conditions, the parking procedure cannot be carried out correctly and the vehicle may begin to slide. This can lead to

accidents with vehicle damage and to serious injuries.

● Do not use Park Assist Plus with memory function when parking on slippery or frozen roads.

Park Assist Plus may not be available in some regions of a country for technical reasons.

—Observe the display on the Infotainment system.

Finding a suitable parking space

The parking space is clearly visible and unobstructed →

.

Visibility is good, meaning no heavy rain, mist, snow or darkness.

NOTICE

If there is not sufficient distance to kerbs or other obstacles in the parking area, the vehicle may be damaged during the parking

process.

● Carry out the parking procedure again if Park Distance Control indicates an obstacle with a continuous tone.

Programming the procedure for driving into a parking space

1. Drive to the selected parking space as usual.

2. Park the vehicle safely.

3. Store the parking procedure as a parking space in the Infotainment system (variant 1 or 2).

Variant 1: saving the parking procedure for driving into a space in the Park Assist Plus with memory function menu

1. Tap the

2. Tap

function button on the Infotainment system.

for Park Assist Plus.

3. Tap

for Park Assist Plus with memory function.

4. Tap

.

5. Choose the function button then assign the desired symbol and confirm.

The parking procedure is saved as a new parking space.

Variant 2: saving the parking procedure for driving into a space in the vehicle’s exit menu

When leaving the vehicle, the Exit menu is displayed in the Infotainment system.

1. Tap

Save parking procedure .

More information about programming the parking procedure for driving into a space:

—park as smoothly as possible.

—Avoid corrections to the vehicle path on the last few metres to the parking space.

—Do not turn the steering wheel to full lock or too quickly or change direction too often.

To use a name in the Infotainment system instead of the GPS coordinates, edit the stored parking space in the parking system

menu.

Programming the procedure for driving out of a parking space

The vehicle is in a parking space for which a procedure for driving into a parking space is stored and available in the Infotainment

system.

1. Switch on the ignition and start the engine.

2. Tap the

function button on the Infotainment system.

3. Tap

for Park Assist Plus with memory function.

4. Select the stored parking space (driving into a parking space).

A text message appears on the Infotainment system.

5. Drive out of the parking space.

6. Confirm the end of the procedure for driving out of the parking space with the function button in the Infotainment system.

The procedure for driving out of the parking space is also stored for the current parking space in the menu.

The programming operation is cancelled automatically if the speed is too high or if the distance covered exceeds more than

around 25 m (around 82 ft).

Reprogramming the parking procedure

If you want to reprogram the parking procedure, e.g. to improve the parking result or to drive into the parking space from a different

direction of travel, first delete the stored parking space from the menu.

The procedures for driving into and out of the parking space are always deleted.

Opening the menu

Up to five stored parking procedures can be stored as favourites in the menu for Park Assist Plus with memory function.

1. Tap the

2. Tap

function button on the Infotainment system.

for Park Assist Plus with memory function.

Managing parking spaces

Infotainment system: menu for Park Assist Plus with memory

function.

1

2

3

4

5

Start parking procedure.

Edit stored parking spaces.

Add last parking procedure.

Parking procedure available.

Maximum of five stored parking spaces.

Editing, sorting or deleting parking spaces

1. Tap → Fig. 1 3 .

You can edit all stored parking spaces.

2. To rename a parking space or assign a new symbol, tap

on the parking space symbol.

to reorder the parking spaces, press and hold the function button for a parking space and move it to the new position.

to delete a parking space, tap

To delete all parking spaces, tap

on the parking space symbol.

on the function button for all parking spaces.

Status of stored parking spaces

Infotainment system: parking spaces without navigation.

1

2

3

Parking space not available.

Parking space available.

Automatic parking procedure selected.

Infotainment system: parking space with route guidance for

the navigation system (depends on the and country).

Driving into a parking space

When the vehicle approaches a stored parking space, a parking procedure is displayed automatically in the Infotainment system by

means of a text message.

1. Stop the vehicle and hold it stationary with the foot brake.

2. If necessary, open the parking system menu in the Infotainment system and tap the available parking space.

The function button is shown in blue.

3. Tap Start .

The parking procedure for driving into a space starts →

.

The symbol and a text message are displayed on the Infotainment system →

.

4. Observe any other displays on the Infotainment system.

5. To ensure the best possible result, always wait until Park Assist Plus with memory function has finished turning the steering

wheel at the end of the parking manoeuvre →

.

When the parking procedure has been completed, a text message will be displayed on the Infotainment system and an acoustic

signal will sound.

The electronic parking brake is switched on.

The parking lock is engaged automatically.

WARNING

The steering wheel is turned quickly during manoeuvring. Reaching into the steering wheel can cause serious injuries.

● Take over steering only when the system requests you to do so.

● Take over steering in a hazardous situation.

NOTICE

The vehicle can perform steering movements and corrections during manoeuvring to the vehicle path. Damage can occur if there are

obstacles in the surrounding area.

● Ensure that there is a sufficient distance to obstacles.

● Use the foot brake to brake the vehicle if necessary.

Also observe the following instructions for Park Assist Plus with memory function.

—Stop as close as possible and at most around 1 m (around 3.28 ft) away from the stored vehicle path.

—Always approach the starting position from the same direction of travel.

—If possible, do not drive into and out of parking spaces in very poor visibility conditions as there may be functional restrictions in this

case, for example due to darkness or snow.

Driving into a parking space in underground car parks

In multi-storey car parks with underground parking, a possible procedure for driving into a parking space is not automatically offered

with a text message in the Infotainment system. The driver starts the parking procedure in the parking system menu.

1. Stop the vehicle on the correct level of the underground car park and in the immediate vicinity of the taught-in parking

procedure.

2. Tap the

function button to switch to the parking system.

3. Follow the steps described above.

Driving out of a parking space

The vehicle is in the target position of the stored parking manoeuvre.

The symbol is displayed for the stored parking space in the Infotainment system.

1. Start the engine.

2. Open the parking system menu in the Infotainment system.

3. Tap the available parking space with a stored procedure for driving out of a space.

The function button is shown in blue.

4. Hold the vehicle with the foot brake.

5. Tap Start on the Infotainment system.

The parking procedure for driving out of a space starts.

The symbol and a text message are displayed on the Infotainment system →

6. Observe any other displays on the Infotainment system.

.

7. To ensure the best possible result, always wait until Park Assist Plus with memory function has finished turning the steering

wheel at the end of the parking manoeuvre →

8. Take control of the vehicle →

.

WARNING

When driving out of a parking space, there is a danger that the vehicle could drive into moving traffic. This can lead to an accident

and to serious or fatal injuries.

● Drive the vehicle out of the parking space only when permitted by the traffic situation.

When drive out of a parking space, the vehicle may drive more slowly than usual over the first few metres. If there is an

obstacle at the parking space it can take evasive action and deviate from the stored travel path.

Which parking spaces can be set as navigation destinations?

Stored parking spaces with a navigation symbol can be transferred to the navigation system as a destination. The function depends

on the country.

Starting route guidance

1. To select a destination, tap on a parking space marked with a navigation symbol in the parking system menu on the

Infotainment system.

2. Confirm the text message on the Infotainment system.

Route guidance starts and the parking menu is closed.

follow the instructions for driving out of a parking space with the parking system.

3. When the vehicle has arrived at its destination, observe the text message in the Infotainment system.

Park Assist Plus with memory function is ready to park the vehicle automatically.

Park Assist Plus with memory function does not detect the stored parking space or vehicle path

The vehicle may not be able to detect the area around the stored parking space.

1. Stop vehicle in immediate vicinity of the stored vehicle path.

do not use the parking system in very poor weather or lighting conditions.

clean the windscreen in the area of the front camera if necessary.

check if the vehicle is connected to the internet. The parking system always determines the vehicle’s position using GPS

coordinates.

Camera of Park Assist Plus with memory function deactivated

The camera for the assist systems was deactivated automatically due to a high ambient temperature or prolonged exposure to direct

sunlight. When the camera is available again, Park Assist Plus with memory function will also be available once more.

1. Switch off and restart the engine if necessary.

Park Assist Plus with memory function for Your Volkswagen Tayron SUV First Generation (2018-2025)

Popular Owner Manuals

Latest Owner Manuals