In the roof: function button for controlling the sun blind.
The electric sun blind works when the ignition is switched on.
When the glass roof is fully tilted, the sun blind is automatically moved to a ventilation position. The sun blind remains in the
ventilation position when the glass roof is closed.
Opening the sun blind
— One-touch function: Swipe backwards over the function button → Fig. 1. The one-touch function is interrupted by tapping the
function button or swiping over it again.
—Manual operation: swipe backwards over the function button and hold until the desired position is reached.
Closing the sun blind
— One-touch function: Swipe forwards over the function button → Fig. 1. The one-touch function is interrupted by tapping the
function button or swiping over it again.
—Manual operation: Swipe forwards over the function button and hold until the desired position is reached.
Roll-back function for the sun blind
The roll-back function can reduce the risk of injuries when closing the sun blind → . The sun blind will open again automatically if it
is unable to close because it is stiff or obstructed.
1. Check to see why the sun blind has not closed.
2. Try to close the sun blind again.
The sun blind will open again immediately if it is still unable to close because it is stiff or obstructed. After opening, the sun blind
can be closed again within a short period of time without the roll-back function.
3. If the sun blind still cannot be closed, close it without the roll-back function.
Closing the sun blind without the roll-back function
1. Try to close the sun blind again.
2. If the sun blind still cannot be closed, swipe forward over the function button within 5 seconds and hold → Fig. 1 until the sun
blind is fully closed.
The sun blind will now close without the roll-back function.
English 