The maximum power is 150 W (300 W peak power).
The socket is activated automatically as soon as a plug is inserted when the engine is running. If there is sufficient energy available, the
socket can also still be used when the engine is switched off.
Connecting an electrical device
1. In order to release the child socket protection, open the cover if necessary and plug the plug into the socket as far as it will go.
Electricity will not flow until the child socket protection has been unlocked.
Temperature switch-off
The inverter in the 230-volt socket will switch itself off automatically if the temperature exceeds a specific value. The switch-off
function prevents the connected device from overheating when the power consumption is too high or if the ambient temperature is
too high. The 230-volt socket cannot be used again until after the cool-down phase.
The plug on the connected device must first be removed and then reinserted before using the 230-volt socket again after the cooling
phase. This prevents the electrical devices being switched on again unintentionally.
DANGER
Contact with the high voltage in the electrical system, e.g. sockets, can cause electric shocks, serious burns and death.
● Do not spill any liquids over the sockets.
● Do not plug any adapters, power strips, multiple adapters or extension cables into the 230-volt socket.
● Never insert any items made of conductive materials, e.g. a screwdriver, into the contacts of the 230-volt socket.
● Do not use faulty devices with the 230-volt socket.
● Disconnect devices from the 230-volt socket if a fault occurs.
NOTICE
The vehicle sockets can be damaged if they are not used correctly. This can result in damage to the electronics and vehicle.
● Only connect devices to the socket with a voltage that matches the voltage of the socket.
● Do not plug any very heavy devices or plugs, such as mains adapters, directly into the socket.
If devices with a high starting current are prevented from being switched on, this may be due to the integrated overcurrent
cut-out function. In this case, disconnect the power supply from the electrical device and connect again after waiting
approximately 10 seconds.
Functional restrictions may occur with some devices when they are connected to the 230-volt socket due to the lower power
output (wattage).
Mobile devices can be charged in the vehicle either via the installed USB-C connections or wirelessly.
Charging via the USB-C ports
The following USB-C ports may be available in the vehicle:
Identification of a USB connection for data transfer and charging.
Identification of a USB connection suitable only for charging.
Available charging capacity
Voltages of up to 20 V are made available via the USB port. These voltages permit a charging capacity of up to 45 W.
Depending on equipment, the following charging profiles can be supported by the USB connections:
— Legacy charging (2.5 W).
English 